6TPG150MZG

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPG Features size, Low profile (L3.5 × W 2.8 × H 1.1 mm) capacitance (220 μF max.) ● RoHS compliance, Halogen free ● Small ● Large Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B1G B15G –55 °C to +105 °C 2.5 V.DC to 12.5 V.DC 2.0 V.DC to 10.0 V.DC 33 μF to 220 μF 2.5 V.DC to 6.3 V.DC 2.0 V.DC to 5.0 V.DC 150 μF to 220 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +85 °C, 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code H W Polarity marking(+) R. Voltage code Lot. No. S R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 8.0 k 10.0 A R. Cap. (μF) Code 33 N7 47 S7 100 A8 150 E8 220 J8 12.5 B S W1 Unit : mm Size code B1G B15G L+0.3 −0.1 3.5 3.5 +0.3 W−0.1 2.8 2.8 H±0.1 1.1 1.4 S±0.2 0.8 0.8 W1±0.1 2.2 2.2 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2.5 4 TPG 6.3 8 10 12.5 85 85 85 85 85 85 85 85 85 85 85 2.0 2.0 3.2 5.0 5.0 5.0 5.0 5.0 6.3 8.0 10.0 105 105 105 105 105 105 105 105 105 105 105 220 220 100 150 47 47 33 Case size (mm) L W H 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 1.1 1.4 1.4 1.1 1.1 1.1 1.4 1.4 1.1 1.1 1.1 Specifications Size Ripple ✽1 code current (mAr.m.s.) B1G 1000 1400 B15G 1000 1000 B1G 1100 1200 1000 B15G 1200 1000 B1G 1000 1000 ✽2 ESR tan d ✽3 (mΩ max.) 70 30/300 kHz 70 70 55 35/300 kHz 70 35/300 kHz 70 70 70 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Standard Min. Packaging Q'ty (pcs) 55.0 2R5TPG220M 2500 110.0 2R5TPG220MUG 2500 88.0 4TPG220M 2500 63.0 6TPG100M 2500 63.0 6TPG100MG 2500 126.0 6TPG100MZGD 2500 94.5 6TPG150M 2500 189.0 6TPG150MZG 2500 37.6 8TPG47M 2500 47.0 10TPG47M 2500 2500 41.3 12TPG33M ✽4 LC (μA) Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015