ADQM26024

1 Form A 60A power latching relays To Be Discontinued Last time buy: September 30, 2019 DQ-M RELAYS (ADQM) FEATURES RoHS compliant Protective construction: Flux-resistant type 1. Miniature and high capacity Miniature relay capable of high 60 A capacity control. Size: 29.0(L)×38.0(W)×17.3(H) mm 1.142(L)×1.496(W)×.681(H) inch Nominal switching capacity: 60A 250V AC 2. Latching type Latching type contributes to device energy efficiency. Nominal operating power • 500mW (1 coil latching) • 1,000mW (2 coil latching) 3. High insulation Between contact and coil Breakdown voltage: 4,000 V AC Surge breakdown voltage: 10,000 V TYPICAL APPLICATIONS 1. Remote control of electric power meters 2. Time switches ORDERING INFORMATION ADQM 6 0 DQ-M relays Operating function 1: 1 coil latching (1 Form A) 2: 2 coil latching (1 Form A) Contact capacity 6: 60 A Terminal shape Nil: M4 securing screw Contact material 0: Standard contact (AgNi type) Nominal coil voltage (DC) 4H: 4.5 V, 06: 6 V, 09: 9 V, 12: 12 V, 24: 24 V TYPES Contact arrangement Nominal coil voltage 1 Form A 4.5V DC 6V DC 9V DC 12V DC 24V DC Part No. 1 coil latching ADQM1604H ADQM16006 ADQM16009 ADQM16012 ADQM16024 2 coil latching ADQM2604H ADQM26006 ADQM26009 ADQM26012 ADQM26024 Standard packing: Carton: 20 pcs.; Case: 200 pcs. –1– ASCTB179E 201809-T To Be Discontinued Last time buy: September 30, 2019 DQ-M (ADQM) RATING 1. Coil data 1) 1 coil latching Nominal coil voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 4.5V DC 6V DC 9V DC 12V DC 24V DC 80%V or less of nominal voltage (Initial) 80%V or less of nominal voltage (Initial) 111.1mA 83.3mA 55.6mA 41.7mA 20.8mA 40.5Ω 72Ω 162Ω 288Ω 1,152Ω 500mW 130%V of nominal voltage Nominal coil voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 4.5V DC 6V DC 9V DC 12V DC 24V DC 80%V or less of nominal voltage (Initial) 80%V or less of nominal voltage (Initial) 1,000mW 130%V of nominal voltage 2) 2 coil latching Nominal operating current [±10%] (at 20°C 68°F) 221.7mA 166.7mA 111.1mA 83.3mA 41.7mA 20.3Ω 36Ω 81Ω 144Ω 576Ω 2. Specifications Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Surge breakdown Between contact and coil voltage*2 (Initial) Set time (at 20°C 68°F) (Initial) Reset time (at 20°C 68°F) (Initial) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical Conditions for operation, transport and storage*3 Max. operating speed Unit weight Specifications 1 Form A Max. 30 mΩ (By voltage drop 6 V DC 1A) AgNi type 60 A 250V AC 15,000 V A 250V AC 60 A AC 500mW (1 coil latching), 1,000mW (2 coil latching) 100mA 5 V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. 1,500 Vrms for 1min. (Detection current: 10mA.) 4,000 Vrms for 1min. (Detection current: 10mA.) Min. 10,000 V Max. 20 ms (Nominal voltage applied to the coil, excluding contact bounce time.) Max. 20 ms (Nominal voltage applied to the coil, excluding contact bounce time.) Min. 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 2.0 mm Min. 106 (at 180 times/min.) 60A 250V AC Min. 103 (resistive load, operating frequency: 15s ON, 45s OFF) 50A 250V AC Min. 104 (resistive load, operating frequency: 15s ON, 45s OFF) Ambient temperature: –40 to +70°C –40 to +158°F Humidity: 5 to 75% R.H. (Not freezing and condensing at low temperature) 1 times/min. (at rated load) Approx. 35 g 1.23 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. –2– ASCTB179E 201809-T To Be Discontinued Last time buy: September 30, 2019 DQ-M (ADQM) DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data 38.0 1.496 44.0 1.732 0.4 .016 29.5 1.161 a. a. 40.4 i d i 3 d 1.591 4. 9 2- -.16 2 25.4 1.000 (2.0) 0.4 .016 (.079) 1.5 .059 5.08 .200 2-9.9 2-.390 20.56 .809 19.42 .765 2 coil latching type only 5.8 .228 1.5 .059 3.6 .142 22.86 .700 . dia a. 5 di 1. 59 3 -.0 3 Note 1) 2 coil latching type only Tolerance: ±0.1 ±.004 Schematic (Bottom view) 1 coil latching type 2 coil latching type 3.7 .146 0.8 .031 5.08 .200 5.08 .200 25.4 1.000 (8.9) (.350) 17.3 .681 0.8 .031 0.8 .031 7.62 .300 17.78 .700 5.08 .200 5.08 .200 2-8.7 2-.343 Lot. No. 5.08 .200 1.8 .071 a. di ia. 0 d 2. 9 4- -.07 4 29.0 1.142 34.5 1.358 40.4 1.591 PC board pattern (Bottom view) This differs with the part No. 0.3 9.25 .012 .364 2 - 5 4 6 7 2 7.62 .300 General tolerance: ±0.3 ±.012 1 6 7 3 Reset coil 0.8 .031 5 4 - Set coil 1 + + Notes: 1. These are dummy terminals for the strength reinforcement for the M4 screw terminal connection. Fix or solder these to the PC board in case setting M4 screw. However, do not use the dummy terminals as wiring to the PC board. In case wiring of the dummy terminals, the conductor destruction may occur due to the high current. 2. No 3rd terminal on 1 coil latching type. NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”. 2. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different. Also, the power waveform should be square and we recommend it be at least 0.1 seconds. Please keep continuous power to the coil to within 10 seconds. 3. Usage, transport and storage conditions 1) Temperature: –40 to +70°C –40 to +158°F 2) Humidity: 5 to 75% RH (Avoid freezing and condensation.) The humidity range depends on the temperature. The allowable range are as shown in the below figure. 3) Air pressure: 86 to 106 kPa Temperature and humidity range for operation, transport, and storage Humidity, %R.H. 75 4. Others Installation of M4 securing screw Do not apply excessive pressure on the terminals. This could adversely affect relay performance. Secure a dummy terminal designed for reinforcement of the terminal to the PC board and use a washer in order to prevent deformation. Keep the installation torque to within 1.2 and 1.4 N·m (12 to 14 kgf·cm). Also, use a spring washer to prevent it from loosening. Do not connect the dummy terminals designed for reinforcement of the terminal as wiring to the PC board. The conductor destruction may occur according to the amount of current. Allowable range (Avoid icing (Avoid when used at condensation temperatures when used at lower than temperatures 0°C 32°F) higher than 0°C 32°F) 5 –40 –40 0 +32 Ambient temperature, °C °F –3– 70 +158 ASCTB179E 201809-T