1 Form A 8A/16A,
Small Polarized Power
Relays (latching type)
New
Low profile type
(Inrush type)
DW RELAYS (ADW1)
FEATURES
TYPICAL APPLICATIONS
1. Low profile type available
(h = 15.8 mm .622 inch)
2. Inrush type available
(TV-8 UL/C-UL approved)
3. IEC60335-1* compliant type
available
(PTI 325V VDE approved)
4. Reflow possible (pin-in-paste)
5. Certified by UL/C-UL, VDE
1. Lighting control equipment
2. Smart meters
3. Industrial equipment
4. Security equipment
5. Home appliances
6. Various power supplies
* Common safety standard for major electrical
appliance
Reflow
compatible type
(Standard type)
IEC60335-1
compliant type
(Standard & Inrush type)
RoHS compliant
Protective construction: Flux-resistant
type
ORDERING INFORMATION
ADW 1
W
Contact arrangement
1: 1 Form A
Operating function
1: 1 coil latching type
2: 2 coil latching type
Nominal coil voltage (DC)
03: 3V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 24: 24V
Contact capacity
Nil: Standard type (8A)
H: Inrush type (16A, Inrush current 100A)
Type classification
Nil: Reflow compatible type
L: Low profile type
T: IEC60335-1 compliant type
Notes: 1. “L” and “T” type are non-compliant reflow soldering.
2. Low profile type is available (inrush type only).
3. The suffix “W” on the part number is only displayed on the inner and outer packaging.
It is not displayed on the relay.
–1–
ASCTB8E 201603-T
DW (ADW1)
TYPES
1. Standard type (8A) (Reflow compatible type)
Contact arrangement
Nominal coil voltage
1 Form A
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Part No.
1 coil latching type
ADW1103W
ADW1105W
ADW1106W
ADW1109W
ADW1112W
ADW1124W
2 coil latching type
ADW1203W
ADW1205W
ADW1206W
ADW1209W
ADW1212W
ADW1224W
Standard packing: Carton: 100 pcs.; Case: 500 pcs.
Note: Carton packing is standard. Tube packing type is also available. Please consult us for details.
2. Standard type (8A) (IEC60335-1 compliant type)
Contact arrangement
Nominal coil voltage
1 Form A
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Part No.
1 coil latching type
ADW1103TW
ADW1105TW
ADW1106TW
ADW1109TW
ADW1112TW
ADW1124TW
2 coil latching type
ADW1203TW
ADW1205TW
ADW1206TW
ADW1209TW
ADW1212TW
ADW1224TW
Standard packing: Carton: 100 pcs.; Case: 500 pcs.
Note: Carton packing is standard. Tube packing type is also available. Please consult us for details.
3. Inrush type (16A, Inrush current 100A · IEC60335-1 compliant type)*1, *2
Contact arrangement
Nominal coil voltage
1 Form A
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Part No.
1 coil latching type
ADW1103HTW
ADW1105HTW
ADW1106HTW
ADW1109HTW
ADW1112HTW
ADW1124HTW
2 coil latching type
ADW1203HTW
ADW1205HTW
ADW1206HTW
ADW1209HTW
ADW1212HTW
ADW1224HTW
Standard packing: 100 pcs.; Case: 500 pcs.
Notes: *1. Carton packing is standard. Tube packing type is also available. Please contact us for details.
*2. Please contact us for the reflow compatible type of inrush type (16A, Inrush current 100A · IEC60335-1 compliant type).
4. Inrush type (16A, Inrush current 100A · Low profile type)
Contact arrangement
Nominal coil voltage
1 Form A
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Part No.
1 coil latching type
ADW1103HLW
ADW1105HLW
ADW1106HLW
ADW1109HLW
ADW1112HLW
ADW1124HLW
2 coil latching type
ADW1203HLW
ADW1205HLW
ADW1206HLW
ADW1209HLW
ADW1212HLW
ADW1224HLW
Standard packing: 100 pcs.; Case: 500 pcs.
–2–
ASCTB8E 201603-T
DW (ADW1)
RATING
1. Coil data
1) 1 coil latching type
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
*80%V or less of
nominal voltage
(Initial)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
*80%V or less of
nominal voltage
(Initial)
66.7mA
40.0mA
33.3mA
22.2mA
16.7mA
8.3mA
45Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
200mW
110%V of nominal
voltage
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Set coil
Reset coil
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
2) 2 coil latching type
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
133.3mA
80.0mA
66.7mA
44.4mA
33.3mA
16.7mA
133.3mA
80.0mA
66.7mA
44.4mA
33.3mA
16.7mA
Set coil
Reset coil
Set coil
Reset coil
22.5Ω
62.5Ω
90 Ω
202.5Ω
360 Ω
1,440 Ω
22.5Ω
62.5Ω
90 Ω
202.5Ω
360 Ω
1,440 Ω
400mW
400mW
Max. applied voltage
(at 20°C 68°F)
110%V of nominal
voltage
*Square, pulse drive
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Item
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contact and coil
Surge breakdown voltage*2
(Between contact and coil)
Set time (at 20°C 68°F) (Initial)
Reset time (at 20°C 68°F) (Initial)
Functional
Shock resistance
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Resistive load
Expected life
Electrical
Inrush current
Conditions
Unit weight
Conditions for operation, transport and
storage*3 *4
Specifications
Standard type
Inrush type
1 Form A
Max. 100 mΩ (By voltage drop 6 V DC 1A)
AgSnO2 type
8A 250V AC
16A 277V AC
2,000VA
4,432VA
250V AC
277V AC
8A AC
16A AC
200mW (1 coil latching type), 400mW (2 coil latching type)
100mA 5 V DC
Min. 1,000MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section)
1,000 Vrms for 1min. (Detection current: 10mA)
5,000 Vrms for 1min. (Detection current: 10mA)
12,000 V (Initial)
Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10μs)
10 to 55 Hz at double amplitude of 3 mm
Min. 106 (at 180 times/min.)
Min. 5 × 104 (at 8A 250V AC, at 20 times/min.)
Min. 2 × 104 (at 16A 277V AC, ON:OFF = 1s:5s)
Min. 105 (at 5A 250V AC, at 20 times/min.)
Min. 5 × 104 (at 8A 250V AC, at 20 times/min.)
(IEC60335-1 type only)
Min. 2.5 × 104 [Inrush 100A 600W (120V AC)
—
Tungsten]
Cycle rate ON:OFF = 1s:59s
Temperature: –40°C to +85°C –40°F to +185°F
(8A or less),
Temperature: –40°C to +85°C –40°F to +185°F
–40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and
(Over 8A to 16A)
condensing at low temperature)
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Approx. 8 g .28 oz (Low profile type: Approx. 7.5 g .26 oz)
Notes: *1. Minimum switching load is a guide to the lower current limit of switching under the micro-load. This parameter is changed by the condition, such as switching times,
environment condition, and expected reliability. Therefore, Panasonic Corporation cannot assure the reliability. When the relay is used lower than minimum
switching load, reliability is attrition. Please use the relay over minimum switching load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. Allowable range when in original packaging is –40°C to +70°C –40°F to +158°F.
–3–
ASCTB8E 201603-T
DW (ADW1)
REFERENCE DATA
■ Standard type and Inrush type
■ Standard type
1. Max. switching capacity (AC resistive load)
1. Set time (1 coil latching type)
2. Reset time (1 coil latching type)
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
10
8
7.0
7.0
6.0
6.0
5.0
4.0
Max.
3.0
5.0
4.0
Max.
3.0
Min.
Min.
Standard type
1
1
Reset time, ms
Inrush type
Set time, ms
Contact current, A
100
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
10
100 250
Contact voltage, V
2.0
2.0
1.0
1.0
0.0
70
1000
80
90
100 110 120
Coil applied voltage, %V
0.0
70
130
80
90
100 110 120
Coil applied voltage, %V
130
■ Inrush type
Tested sample: ADW1106, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
1. Set time (1 coil latching type)
20
Reset voltage
Ave.
Ave.
10
0
20 40
60
80 100
Set time, ms
Change rate
to nominal
voltage, %V
30
Set voltage
-10
7.0
6.0
6.0
5.0
4.0
3.0
Max.
Min.
5.0
4.0
3.0
Max.
Min.
2.0
2.0
1.0
1.0
-30
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
4. Reset time (2 coil latching type)
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
5. Ambient temperature characteristics
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
7.0
7.0
6.0
6.0
Reset time, ms
Set time, ms
7.0
-20
3. Set time (2 coil latching type)
5.0
4.0
3.0
2.0
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
Max.
Min.
Tested sample: ADW1105HL, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
30
Change rate
to nominal
voltage, %V
Ambient
temperature, °C
-60 -40 -20
2. Reset time (1 coil latching type)
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C 82.4°F
Contact load: 5V DC, 10mA
Reset time, ms
3. Ambient temperature characteristics
5.0
Ambient
temperature, °C
-60 -40 -20
4.0
20
Reset voltage
10
Set voltage
0
20 40
3.0
Max.
Min.
2.0
60
80 100
-10
1.0
1.0
-20
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
-30
–4–
Ave.
Ave.
ASCTB8E 201603-T
DW (ADW1)
DIMENSIONS (mm inch)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. Standard height type
External dimensions
CAD Data
PC board pattern (Bottom view)
24.00
.945
17.50
.689
4 or 5-1.20 dia. hole
4 or 5-.047 dia. hole
3.50
.138
7.50
.295
2 coil latching type only
10.00
.394
Tolerance: ±0.1 ±.004
2 coil latching type only
0.70
.028
18.80
.740
Schematic (Bottom view)
1 coil latching type
−1
2 coil latching type
−1
3
3
+7
0.40 dia.
.016 dia.
1.50
.059
0.80
.031
17.50
.689
0.80
.031
0.20
.008
3.20
.126
3.50
.138
0.27
.011
7.50
.295
+6
−6
5
(Reset condition)
5
(Reset condition)
General tolerance: ±0.3 ±.012
2. Low profile type
External dimensions
CAD Data
PC board pattern (Bottom view)
24.00
.945
17.50
.689
4 or 5-1.20 dia. hole
4 or 5-.047 dia. hole
3.50
.138
7.50
.295
2 coil latching type only
10.00
.394
Tolerance: ±0.1 ±.004
0.25
.010
Schematic (Bottom view)
15.80 +0.20
−0.30
.622 +.008
−.012
2 coil latching type only
1 coil latching type
−1
0.40 dia.
.016 dia.
1.50
.059
0.80
.031
17.50
.689
0.80
.031
3.50
.138
3.20
.126
7.50
.295
3
+7
+6
General tolerance: ±0.3 ±.012
−1
3
0.27
.011
0.20
.008
2 coil latching type
5
(Reset condition)
−6
5
(Reset condition)
SAFETY STANDARDS
Item
Standard type
(8A)
File No.
E43149
E43149
Inrush type
(16A)
UL/C-UL (Recognized)
Contact rating
8A 250V AC R 85°C 185°F 5×104
5A 30V DC R 85°C 185°F 5×104
16A 277V AC R 60°C 140°F 5×104
8A 250V AC R 85°C 185°F 5×104
5A 30V DC R 85°C 185°F 5×104
1200W Standard ballast 277V AC 50°C 122°F
6×103
1200W Tungsten, 240V AC 50°C 122°F 6×103
600W Tungsten, 120V AC 50°C 122°F 2.5×104
File No.
40032254
40032254
VDE (Recognized)
TV rating (UL/C-UL)
Contact rating
File No.
Contact rating
8A 250V AC (cosφ =1.0) 85°C 185°F 5×104
—
—
5A 30V DC (0ms) 85°C 185°F 5×104
4
16A 277V AC (cosφ =1.0) 70°C 158°F 5×10 E43149 TV-8 rating 240V AC
8A 250V AC (cosφ =1.0) 85°C 185°F 5×104
40°C 104°F 2.5×104
5A 30V DC (0ms) 85°C 185°F 5×104
5A 347V AC R 85°C 185°F (UL standards only)
5×104
Notes: 1. CSA standards: Certified by C-UL
2. CQC standard: Application pending, Please contact us.
–5–
ASCTB8E 201603-T
DW (ADW1)
NOTES
1. For cautions for use, please read
“GENERAL APPLICATION
GUIDELINES”.
2. Solder and cleaning conditions
1) Flow solder mounting conditions
Please obey the following conditions
when soldering automatically.
(1) Preheating: within 120°C 248°F
(solder surface terminal portion)
and within 120 seconds
(2) Soldering iron: 260°C±5°C
500°F±41°F (solder
temperature) and within 6
seconds (soldering time)
*Furthermore, because the type
of PC board used and other
factors may influence the
relays, test that the relays
function properly on the actual
PC board on which they are
mounted.
2) Reflow solder mounting (Pin-inPaste mounting) conditions
3. Max. applied voltage
It is not allowed to apply the
continuous maximum voltage to the
coil.
In order to obtain the specified
performance, please apply nominal
coil voltage.
4. Set/reset pulse time of latching type
relay
Regarding the set/reset pulse time of
the latching type relay, it is
recommended to apply nominal coil
voltage for minimum 30ms pulse
across the coil to secure the sure
operation considering the ambient
temperature and condition change
through service life.
T3
T2
T1
t1
t2
T1 = 150 to 180°C 302 to 356°F
T2 = 230°C 446°F or more
T3 = 250°C 482°F or less
t 1 = 60 to 120 seconds
t 2 = within 30 seconds
• Cautions to observe when
mounting temperature increases in
the relay are greatly dependent on
the way different parts are located
a PC board and the heating
method of the reflow device.
Therefore, please conduct testing
on the actual device beforehand
after making sure the parts
soldered on the relay terminals
and the top of the relay case are
within the temperature conditions
given above.
3) Since this is not a sealed type relay,
do not clean it as is. Also, be careful
not to allow flux to overflow above
the PC board or enter the inside of
the relay.
–6–
ASCTB8E 201603-T
DW (ADW1)
–7–
ASCTB8E 201603-T
DW (ADW1)
–8–
ASCTB8E 201603-T