AGQ20TS1HZ

Small size controlled 3.5 A inrush current possible GQ RELAYS TH types FEATURES TYPICAL APPLICATIONS 1. Small size controlled 3.5 A inrush current possible 2. 2.4 coil voltage type newly available DC battery operation 3. Flat compact size 10.6 (L) × 7.2 (W) × 5.2 (H) mm .417 (L) × .283 (W) × .205 (H) inch 1. Thermostat (HVAC temperature controller) 2. Others, High-capacity control etc. RoHS compliant ORDERING INFORMATION AGQ 2 T Contact arrangement 2: 2 Form C Operating function 0: Single side stable 1: 1 coil latching Type of operation T: Power type (B.B.M.) Terminal shape Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type Nominal coil voltage (DC) 1H: 1.5V 2H: 2.4V 03: 3V 4H: 4.5V 06: 6V 09: 9V 12: 12V 24: 24V Packing style Nil: Tube packing X: Tape and reel packing (picked from 1/2/3/4 pin side) Z: Tape and reel packing (picked from 5/6/7/8 pin side) TYPES 1. Standard PC board terminal Nominal coil voltage 1.5 V DC 2.4 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Single side stable Part No. AGQ20T1H AGQ20T2H AGQ20T03 AGQ20T4H AGQ20T06 AGQ20T09 AGQ20T12 AGQ20T24 1 coil latching Part No. AGQ21T1H AGQ21T2H AGQ21T03 AGQ21T4H AGQ21T06 AGQ21T09 AGQ21T12 AGQ21T24 Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. –1– ASCTB375E 201607-T GQ (AGQ) 2. Surface-mount terminal 1) Tube packing Single side stable Part No. AGQ20T1H AGQ20T2H AGQ20T03 AGQ20T4H AGQ20T06 AGQ20T09 AGQ20T12 AGQ20T24 Nominal coil voltage 1.5 V DC 2.4 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 1 coil latching Part No. AGQ21T1H AGQ21T2H AGQ21T03 AGQ21T4H AGQ21T06 AGQ21T09 AGQ21T12 AGQ21T24 : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Single side stable Part No. AGQ20T1HZ AGQ20T2HZ AGQ20T03Z AGQ20T4HZ AGQ20T06Z AGQ20T09Z AGQ20T12Z AGQ20T24Z Nominal coil voltage 1.5 V DC 2.4 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 1 coil latching Part No. AGQ21T1HZ AGQ21T2HZ AGQ21T03Z AGQ21T4HZ AGQ21T06Z AGQ21T09Z AGQ21T12Z AGQ21T24Z : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tape and reel: 900 pcs.; Case: 1,800 pcs. Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed. RATING 1. Coil data 1) Single side stable type Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) 1.5 V DC 93.8 mA 16 2.4 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 58.5 mA 46.7 mA 31 mA 23.3 mA 15.5 mA 11.7 mA 41 Ω 64.2 Ω 145 Ω 257 Ω 579 Ω 1,028 Ω Nominal coil voltage 24 Pick-up voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Drop-out voltage (at 20°C 68°F) 10%V or more of nominal voltage* (Initial) V DC 9.6 mA 2,504 Nominal operating power Max. applied voltage (at 20°C 68°F) 140 mW 150%V of nominal voltage 230 mW 120%V of nominal voltage Nominal operating power Max. applied voltage (at 20°C 68°F) 100 mW 150%V of nominal voltage Ω Ω 2) 1 coil latching type 1.5 V DC Nominal operating current [±10%] (at 20°C 68°F) 66.7 mA 2.4 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 41.7 mA 33.3 mA 22.2 mA 16.7 mA 11.1 mA 8.3 mA 5.0 mA Nominal coil voltage Set voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Coil resistance [±10%] (at 20°C 68°F) 22.5 Ω 57.6 Ω 90 Ω 202.5 Ω 360 Ω 810 Ω 1,440 Ω 4,800 Ω 120 mW *Pulse drive (JIS C 5442-1996) –2– ASCTB375E 201607-T GQ (AGQ) 2. Specifications Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive) Max. switching power (resistive) Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Specifications 2 Form C Max. 100 mΩ (By voltage drop 6 V DC 1A) AgNi + Au plating 2 A 30 V DC, 1 A 30 V DC, 0.3 A 125 V AC 60 W (DC), 30 W (DC), 37.5 V A (AC) 110 V DC, 125 V AC 2 A (AC, DC) 10μA 10 mV DC Single side stable 1 coil latching Nominal operating power 140mW (1.5 to 12 V DC), 230mW (24 V DC) 100mW (1.5 to 12 V DC), 120mW (24 V DC) Min. 1,000MΩ (at 500V DC) Measured portion is the same as the case of dielectric voltage Insulation resistance (Initial) Electrical characteristics Breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets 750 Vrms for 1min. (Detection current: 10mA) 1,500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) Surge breakdown voltage (Initial) Between open contacts Between contact and coil 1,500 V (10×160μs) (FCC Part 68) 2,500 V (2×10μs) (Telcordia) Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (half -sine shock pulse: 6 ms; detection time: 10μs.) Min. 1,000 m/s2 (half -sine shock pulse: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 5.0 mm Min. 5 × 107 (at 180 cpm) Min. 1 × 105 (1A 30V DC resistive) Min. 1 × 105 (3.5A inrush (250ms)/1A 30V AC (cosφ =0.4)) (ON/OFF=1s/9s) Ambient temperature: (Single side stable, 1 coil latching type) –40°C to +85°C –40°F to +185°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1.0 g .035 oz Temperature rise (at 20°C 68°F) Operate time [Set time] (at 20°C 68°F) (Initial) Release time [Reset time] (at 20°C 68°F) (Initial) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES. REFERENCE DATA 1. Electrical life (1 × 105 operation is possible) Tested sample: AGQ21TA03, 6 pcs. Switching frequency: ON:OFF = 1s:9s Ambient temperature: 25°C 77°F Circuit COM1 Condition: 30V AC Inrush current: 3.5A (effective value), Inrush time 250ms steady current: 1.0A (effective value), (Inductive load cosφ = 0.4) Inrush current wave form VS time NO1 Detection Circuit 60Hz – 24V + Contact Weld Min 0.5s Miss Contact after 0.2s G 6 Contact Current, A AC30V 4 2 0 -2 -4 -6 Time (ms), Interval (100ms) *Precaution When using at 3.5A, connection of NO (pin #5 and #8) and COM (pin #4 and #9) in the circuit is required. Pin layout and schematic (Bottom View) 1 coil latching 1 2 3 4 8 7 6 5 Load –3– ASCTB375E 201607-T GQ (AGQ) DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. PC board terminal External dimensions CAD Data 10.60±0.3 .417±.012 PC board pattern 5.20±0.2 .205±.008 3.20 .126 0.40±0.1 .016±.004 3.20±0.15 .126±.006 0.20±0.1 .008±.004 5.08±0.15 .200±.006 2.20±0.15 .087±.006 3.50±0.3 2.20±0.15 .138±.012 .087±.006 Schematic (Bottom view) Single side stable High sensitivity single side stable 2.20 .087 7.20±0.3 .283±.012 2.20 .087 5.08 .200 1 2 3 4 8 7 6 5 1 coil latching 1 2 3 4 8 7 6 5 0.85 dia. .033 dia. Tolerance: ±0.1 ±.004 Direction indication Direction indication (Deenergized condition) (Reset condition) 2. Surface-mount terminal CAD Data Suggested mounting pad (Tolerance: ±0.1 ±.004) Single side stable/1 coil latching/High sensitivity single side stable External dimensions Single side stable/1 coil latching/High sensitivity single side stable Type Max. 5.40 .213 7.20±0.3 .283±.012 10.60±0.3 .417±.012 A type 0.40±0.1 .016±.004 3.20±0.15 .126±.006 Max. 5.40 .213 2.20±0.15 .087±.006 2.20±0.15 .087±.006 0.20±0.1 .008±.004 2.66 6.74 .105 .265 5.08±0.15 .200±.006 8.40±0.3 .331±.012 0.80 .031 7.20±0.3 .283±.012 10.60±0.3 .417±.012 2.20 .087 2.20 .087 3.20 .126 S type 0.40±0.1 .016±.004 3.20±0.15 .126±.006 2.20 .087 2.20 .087 3.20 .126 0.20±0.1 .008±.004 5.08±0.15 .200±.006 2.20±0.15 .087±.006 2.20±0.15 .087±.006 2.06 .081 6.14 .242 0.80 .031 7.20±0.3 .283±.012 Schematic (Top view) Single side stable High sensitivity single side stable 8 7 6 5 1 2 3 4 1 coil latcing 8 7 6 5 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) –4– ASCTB375E 201607-T GQ (AGQ) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. (S type) (1)-2 Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0 dia. .059 +.003 .0 dia. 2.0 .079 Orientation (indicates PIN No.1) stripe 4.0 2.00 dia. .157 .079 dia. 1.75 .069 11.5 .453 Max. 6.55 .256 0.40 .016 24.0±0.3 .945±.012 11.1 .437 GQ relays 12.0 .472 7.8 .307 Tape coming out direction Stopper (green) Stopper (red) General tolerance ±0.1 mm .004 inch (2) Dimensions of plastic peel Orientation (indicates PIN No.1) stripe mm inch C B Stopper (red) 2) Tape and reel packing (A type) (1)-1 Tape dimensions 80±1 dia. 3.150±.039 dia. mm inch Relay polarity bar (Z type) 1.5+0.1 0 dia. .059+.003 dia. .0 2.0 .079 330±2 dia. 12.992±.079 dia. 4.0 2.0 dia. .157 .079 dia. 1.75 .069 Max. 6.55 .256 0.40 .016 11.5 .453 24.0±0.3 .945±.012 11.1 .437 GQ relays A 21±0.8 dia. .827±.031 dia. 2.0±0.5 .079±.020 Stopper (green) 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A : 9.8 N {1 kgf} or less Chucking pressure in the direction B : 9.8 N {1 kgf} or less Chucking pressure in the direction C : 9.8 N {1 kgf} or less 12.0 .472 13±0.2 dia. .512±.008 dia. 9.0 .354 Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be also avoided. For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. Tape coming out direction General tolerance ±0.1 mm .004 inch –5– ASCTB375E 201607-T