ALZ12B12W

Automation Controls Catalog Low profile: 15.7mm .618inch height 1a/1c 16A power relay LZ RELAYS (ALZ) FEATURES RoHS compliant Protective construction: Flux-resistant type 1. Low profile type with height of 15.7 mm .618 inch Slim, low profile type with dimensions of 28.8 (L) × 12.5 (W) × 15.7 (H) mm 1.134 (L) × .492 (W) × .618 (H) inch. 2. High insulation resistance Superior insulation characteristics have been achieved by maintaining an insulation distance between coil and contacts of at least 10 mm for both creepage distance and clearances. Furthermore, anti-surge voltage is 10 kV and higher. (Supports European reinforced insulation requirement.) 3. Superior heat resistance Can be used in ambient temperatures up to 85°C 185°F for the class B and 105°C 221°F for the class F. 4. Low operating power Power saved with a nominal operating power of only 400 mW. 5. Conforms to the various safety standards: UL/C-UL, VDE approved. 6. Superior heat resistance and tracking resistance EN60335-1 GWT compliant (Tested by VDE) type available TYPICAL APPLICATIONS 1. Household electrical appliances TV, CATV, Audio equipment, Microwave ovens, and Heaters, etc. 2. Office equipment Copy machines, Packaged air conditioners, and Vending machines 3. Industrial equipment Machine tools, Robots, and Temperature controllers ORDERING INFORMATION ALZ LZ relays Contact arrangement 1: 1 Form C 5: 1 Form A Protective construction 1: Flux-resistant type 2: Sealed type Coil insulation class B: Class B insulation F: Class F insulation Nominal coil voltage (DC) 05: 5 V 18: 18 V 09: 9 V 24: 24 V 12: 12 V Flame resistance and tracking resistance Nil: – T: EN60335-1 (Conform) Packing style W: Carton packing Notes: 1. Certified by UL/C-UL and VDE 2. Tube packing type is also available. Please consult us. 2014.02 industrial.panasonic.com/ac/e/ –1– © Panasonic Corporation 2014 ASCTB203E 201402-T LZ (ALZ) TYPES Contact arrangement Coil voltage 5 V DC 9 V DC 12 V DC 18 V DC 24 V DC 5 V DC 9 V DC 12 V DC 18 V DC 24 V DC 1 Form C 1 Form A Flux-resistant type Class B insulation Class F insulation Part No. Part No. ALZ11B05W ALZ11F05W ALZ11B09W ALZ11F09W ALZ11B12W ALZ11F12W ALZ11B18W ALZ11F18W ALZ11B24W ALZ11F24W ALZ51B05W ALZ51F05W ALZ51B09W ALZ51F09W ALZ51B12W ALZ51F12W ALZ51B18W ALZ51F18W ALZ51B24W ALZ51F24W Sealed type Class B insulation Class F insulation Part No. Part No. ALZ12B05W ALZ12F05W ALZ12B09W ALZ12F09W ALZ12B12W ALZ12F12W ALZ12B18W ALZ12F18W ALZ12B24W ALZ12F24W ALZ52B05W ALZ52F05W ALZ52B09W ALZ52F09W ALZ52B12W ALZ52F12W ALZ52B18W ALZ52F18W ALZ52B24W ALZ52F24W Standard packing: Carton: 100 pcs.; Case: 500 pcs. Notes: 1. Tube packing type is also available. Please consult us. 2. Carton packing symbol “W” is not marked on the relay. 3. EN60335-1 GWT compliant types available. When ordering, please add suffix “T”. Ex. ALZ51F12TW RATING 1. Coil data Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) Max. 70%V nominal voltage (Initial) Min. 10%V nominal voltage (Initial) Nominal operating current [±10%] (at 20°C 68°F) 5 V DC 9 V DC 12 V DC 18 V DC 24 V DC Coil resistance [±10%] (at 20°C 68°F) 80 mA 63Ω 44.4 mA 33.3 mA 22.2 mA 16.7 mA 203Ω 360Ω 810Ω 1,440Ω Nominal operating power (at 20°C 68°F) Max. applied voltage (at 20°C 68°F) 400 mW 130%V of nominal voltage 2. Specifications Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (reference value)*1 Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Mechanical characteristics Temperature rise (coil) Surge breakdown voltage*2 (Between contacts and coil) (Initial) Operate time (at nominal voltage) (at 20°C 68°F) Release time (at nominal voltage) (at 20°C 68°F) Functional Shock resistance Destructive Vibration resistance Expected life Conditions Between open contacts Between contacts and coil Functional Destructive Mechanical (at 180 times/min.) Electrical (at 20 times/min.)*3 Conditions for operation, transport and storage*4, *5 Max. operating speed Unit weight Specifications 1 Form C, 1 Form A Max. 100 mΩ (By voltage drop 6V DC 1A) AgSnO2 type 16A 250V AC 4,000V A 440V AC 16A 400mW 100mA 5V DC Min. 1,000 MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. 1,000 Vrms for 1 min. (Detection current: 10mA) 5,000 Vrms for 1 min. (Detection current: 10mA) Max. 55°C 131°F [with nominal coil voltage and at 16A contact carrying current (resistance method) at 20°C 68°F] 10,000 V Max. 15ms (excluding contact bounce time) Max. 5ms (excluding contact bounce time, without diode) 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs) 1,000 m/s2 (Half-wave pulse of sine wave: 6ms) 10 to 55Hz at double amplitude of 1.5mm (Detection time: 10µs) (Only the N.C. side of 1 Form C is 0.8mm) 10 to 55Hz at double amplitude of 1.5mm Min. 107 N.O.: Min. 105, N.C.: Min. 5 × 104 Ambient temperature: –40°C to +85°C –40°F to +185°F (Class B), Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. (at nominal switching capacity) Approx. 12 g .42 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981. *3. In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. More detail, please look at caution for NOTES. *4. Class F type is ambient temperature 105°C 221°F. *5. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *Please note that some of the specifications listed above may not comply with overseas standards. Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ –2– © Panasonic Corporation 2014 ASCTB203E 201402-T LZ (ALZ) REFERENCE DATA 1. Max. switching power (AC resistive load) 2. Max. switching power (DC resistive load) 3. Coil temperature rise Sample: ALZ11F12, 5pcs. Measured portion: coil inside Contact current: 0 A, 16 A 55 16 10 Temperature rise, °C 100 Contact current, A Contact current, A 100 10 1 0A 16A Normal temperature 50 Normal temperature 45 85°C 85°C 105°C 105°C 40 35 30 25 1 1 10 30 100 0 440 1000 10 20 0 100 100 105 110 115 120 125 130 135 Contact voltage, V Contact voltage, V DIMENSIONS (mm inch) The CAD data of the products with a CAD Data Coil applied voltage, %V mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. 1 Form A type External dimensions CAD Data PC board pattern 5 .197 6-1.3 dia. 6-.051 dia. 15.7 0.5 .618 .020 7.5 .295 2.5 .098 0.5 .020 20 .787 28.8 1.134 5 .197 0.5 .020 3.5 .138 7.5 .295 12.5 .492 0.8 .031 20 .787 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 2. 1 Form C type External dimensions CAD Data PC board pattern 5 5 .197 .197 8-1.3 dia. 8-.051 dia. 15.7 0.5 .618 .020 0.5 .020 2.5 .098 20 .787 28.8 1.134 5 5 .197 .197 0.5 .020 3.5 .138 7.5 .295 7.5 .295 12.5 .492 0.8 .031 20 .787 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ –3– Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 © Panasonic Corporation 2014 ASCTB203E 201402-T LZ (ALZ) SAFETY STANDARDS File No. E43149 UL/C-UL (Recognized) Contact rating 16A 277V AC, 34.8LRA/7.2FLA/120V AC, 15LRA/3FLA/120V AC 10LRA/3FLA 240V AC, 20A 240V AC (N.O. only) 16A 30V DC, 25A 240V AC, 15A 240V AC Resistive load 105°C 221°F (N.O. only) File No. 40000380 VDE (Certified) Contact rating 16A 250V AC (cosφ =1.0) TV rating (UL/CSA) File No. Rating C-UL TV-5 E43149 * CSA standard: Certified by C-UL NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES” on page B-1. 2. Electrical life (Sealed type) In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib after the soldering/ washing process. Vent nib Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ –4– © Panasonic Corporation 2014 ASCTB203E 201402-T