AQW224N

DIP8-pin type featuring low on-resistance 200V/400V load voltage RF 2 Form A Low on-resistance (AQW22❍N) FEATURES 6.4 .252 3.9 .154 9.78 .385 9.78 .385 (Height includes standoff) mm inch 1 8 2 7 3 6 4 5 6. Controls low-level analog signals: PhotoMOS features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 1. 2-channels (Form A) type with high response speed, low leakage current and low on-resistance. 2. Applicable for 2 Form A use as well as two independent 1 Form A use 3. Low capacitance between output terminals ensures high response speed: The capacitance between output terminals is small; Typ. 10 pF. This enables for a fast operation speed of Typ. 0.2 ms. 4. High sensitivity and low onresistance: Max. 0.07 A of load current can be controlled with input current of 5 mA. The on-resistance is less than our conventional models. 5. Low-level off state leakage current 6.4 .252 3.6 .142 RoHS compliant TYPICAL APPLICATIONS • Measuring instruments Scanner, IC checker, Board tester, etc. • Telephones • Computer input machines • Industrial robots TYPES Part No. Output rating* Package AC/DC dual use Load voltage Load current 200 V 50 mA Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQW227N AQW227NA AQW227NAX AQW227NAZ AQW224N AQW224NA AQW224NAX AQW224NAZ DIP8-pin 400 V 40 mA Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: The surface mount terminal indicator “A” and the packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL Continuous load current IL Output Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso Ambient temperature Operating Storage Topr Tstg AQW227N(A) AQW224N(A) 50 mA 5V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 200 V 0.05 A (0.07 A) 400 V 0.04 A (0.05 A) 0.15 A 0.12 A 800 mW 850 mW 1,500 Vrms –40 to +85°C –40 to +185°F –40 to +100°C –40 to +212°F –1– Remarks Peak AC, DC ( ): in case of using only 1 channel 100 ms (1 shot), VL = DC (Non-icing at low temperatures) ASCTB57E 201703-T RF 2 Form A Low on-resistance (AQW22❍N) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage AQW227N(A) AQW224N(A) 0.9 mA 3.0 mA 0.4 mA 0.8 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V IFon IFoff VF 30 Ω Typical On resistance Ron Output capacitance IF = 50 mA IF = 5 mA IL = Max. Within 1 s IF = 0 VB = 0 f = 1 MHz IF = 0 VL = Max. 100 Ω Cout Maximum Off state leakage current 15 pF Maximum Turn off time** I/O capacitance Initial I/O isolation resistance *10 nA ILeak Typical Maximum Typical Maximum Typical Maximum Minimum Turn on time** Transfer characteristics IL = Max. 10 pF Typical Output IL = Max. 70 Ω 50 Ω Maximum Condition 0.2 ms Ton IF = 5 mA IL = Max. 0.5 ms 0.08 ms Toff IF = 5 mA IL = Max. 0.2 ms 0.8 pF Ciso f = 1 MHz VB = 0 1.5 pF 1,000 MΩ Riso 500 V DC *Available as custom orders (1 nA or less) **Turn on/Turn off time Input 90% 3. Recommended operating conditions (Ambient temperature: 25°C 77°F) Please use under recommended operating conditions to obtain expected characteristics. Item Symbol LED current Load voltage (Peak AC) IF VL Continuous load current IL Load voltage (Peak AC) VL Continuous load current IL AQW227N(A) AQW224N(A) Number of used channels 1ch 2ch Min. Max. Unit 5 — 30 160 mA V 0.07 0.05 320 — — 1ch 2ch 0.05 0.04 — Output 10% Toff Ton A V A ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40 to +85°C –40 to +185°F When using 2 channels Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 120 100 100 80 60 40 AQW227N AQW224N 0.8 AQW224N 80 60 40 0 20 40 60 80 85 100 Ambient temperature, °C 0 0.6 0.4 AQW227N AQW227N 0.2 20 20 0 –40 –20 1.0 Turn on time, ms 140 On resistance, Ω Load current, mA 1. Load current vs. ambient temperature characteristics –40 –20 0 20 40 60 80 85 Ambient temperature, °C –2– 0 AQW224N –40 –20 0 20 40 60 80 85 Ambient temperature, °C ASCTB57E 201703-T RF 2 Form A Low on-resistance (AQW22❍N) 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 Turn off time, ms 0.4 0.3 0.2 0.1 0 5 4 3 2 AQW227N 1 0 –20 20 40 60 0 80 85 –40 0 –20 Ambient temperature, °C 20 40 60 4 3 2 1 AQW224N AQW224N AQW227N –40 LED turn off current, mA LED operate current, mA 5 AQW224N 0 80 85 –40 0 –20 Ambient temperature, °C 20 AQW227N 40 60 80 85 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 1.4 100 –4 –3 –2 –1 1 50mA 30mA 20mA 10mA 5mA 1.1 –40 –20 0 20 40 60 2 3 4 Voltage, V –50 –100 1.0 0 AQW227N AQW224N 50 1.3 1.2 10–6 150 Off state leakage current, A Current, mA LED dropout voltage, V 1.5 10–9 AQW224N AQW227N 10–12 –150 80 85 0 100 Ambient temperature, °C 200 300 Load voltage, V 400 10. Turn on time vs. LED forward current characteristics 11. Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz, 30mVrms; Ambient temperature: 25°C 77°F 1.4 0.22 Output capacitance, pF 12 Turn off time, ms Turn on time ms 1.2 1.0 0.8 0.6 0.18 0.14 AQW224N 0.10 AQW227N 0.4 0 0 10 20 30 40 50 0 60 8 6 4 AQW227N 0.06 AQW224N·AQW227N 0.2 10 2 0 10 20 30 40 50 60 LED forward current, mA LED forward current, mA 13. Isolation vs. frequency characteristics (50 Ω impedance) 14. Insertion loss vs. frequency characteristics (50 Ω impedance) Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 0 AQW224N 0 20 40 60 80 100 Applied voltage, V 6 5 Insertion loss, dB Isolation, dB 100 80 60 AQW224N 40 3 AQW227N 2 AQW227N 20 0 AQW224N 4 1 4 10 5 10 6 10 Frequency, HZ 7 10 0 104 105 –3– 106 Frequency, HZ 7 10 ASCTB57E 201703-T