AQW414

GU 2 Form B (AQW414) Normally closed DIP8-pin type of 400V load voltage 9.78 .385 6.4 .252 3.9 .154 GU 2 Form B (AQW414) FEATURES TYPICAL APPLICATIONS 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units • High-speed inspection machines • Telephone equipment • Computers 6.4 .252 9.78 .385 3.6 .142 Two 1 Form B units 2 Form B type mm inch 1 8 2 7 3 6 4 5 2. Applicable for 2 Form B use as well as two independent 1 Form B use 3. Controls load currents up to 0.13 A with an input current of 5 mA 4. High speed switching: operate time typ. 0.46 ms 5. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion RoHS compliant TYPES Output rating* AC/DC dual use Part No. Load voltage Load current Package 400 V 100 mA DIP8-pin Through hole terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQW414 Packing quantity Surface-mount terminal AQW414A AQW414AX AQW414AZ Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW414(A) 50 mA 5V 1A 75 mW 400 V Continuous load current IL 0.1 A (0.13 A) 0.3 A 800 mW 850 mW 1,500 V AC Operating Ipeak Pout PT Viso Topr Storage Tstag Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Panasonic Corporation –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Automation Controls Business Unit Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperatures industrial.panasonic.com/ac/e ASCTB51E 201201-T GU 2 Form B (AQW414) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum AQW414(A) 0.7 mA 3 mA 0.4 mA 0.64 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V IFoff IFon VF Ron Off state leakage current Maximum Operate (OFF) time* Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance IF = 50 mA IF = 0 mA IL= Max. Within 1 s on time IF = 5 mA VL = Max. 1 µA ILeak Typical Maximum Typical Maximum Typical Maximum Minimum IL = Max. 50 Ω Maximum Output IL = Max. 26 Ω Typical On resistance Condition IF = 0 mA ➝ 5 mA IL = Max. 0.46 ms Toff 1 ms 0.40 ms Ton IF = 5 mA ➝ 0 mA IL = Max. 1 ms 0.8 pF Ciso f = 1 MHz VB = 0 V 1.5 pF 1,000 MΩ Riso 500 V DC *Operate/Reverse time Input Output 10% 90% Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper device operation and resetting. Item Input LED current Symbol IF Recommended value Unit 5 mA ■ For Dimensions. ■ For Schematic and Wiring Diagrams. ■ For Cautions for Use. ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. For more information. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA; Continuous load current: 100 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 50 Using 2 channels On resistance, Ω Load current, mA 120 100 1.2 60 Using only 1 channel Operate (OFF) time, ms 140 80 60 30 20 40 –20 0 20 40 60 8085 100 Ambient temperature, °C ASCTB51E 201201-T 0 Panasonic Corporation 0.8 0.6 0.4 0.2 10 20 0 –40 40 1.0 –40 –20 0 20 40 60 8085 Ambient temperature, °C Automation Controls Business Unit 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C industrial.panasonic.com/ac/e GU 2 Form B (AQW414) 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.0 0.8 0.6 0.4 5 4 3 2 1 0.2 0 5 LED reverse (ON) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 1.2 –40 –20 0 0 20 40 60 8085 Ambient temperature, °C 4 3 2 1 –40 –20 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 1.4 50mA 30mA 1.3 20mA 10mA 1.2 5mA 100 80 60 40 20 –6 –5 –4 –3 –2 –1 1 2 3 4 5 6 –20 Voltage, V –40 1.1 Off state leakage current, A 120 Current, mA LED dropout voltage, V 1.5 10 –3 10 –6 10 –9 –60 1.0 –80 10 –12 –100 0 –40 –20 –120 0 20 40 60 8085 100 Ambient temperature, °C 0 20 60 40 80 Load voltage, V 100 10. Operate (OFF) time vs. LED forward current characteristics 11. Reverse (ON) time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 2.0 1.5 1.0 Output capacitance, pF Reverse (ON) time, ms Operate (OFF) time, ms 2.5 1.0 0.8 0.6 0.4 10 20 30 40 50 LED forward current, mA Panasonic Corporation 60 0 100 80 60 40 20 0.2 0.5 0 120 1.2 3.0 10 20 30 40 50 LED forward current, mA Automation Controls Business Unit 60 0 0 10 industrial.panasonic.com/ac/e 20 30 40 50 60 Applied voltage, V ASCTB51E 201201-T