ECPU1C154MA5

Plastic Film Capacitors Stacked Metallized Plastic Film Chip Capacitor Type : ECPU(A) Stacked dielectric and inner electrode with simple mold - less construction Features ● Low ESR ● Max. capacitance values 1.0 μF ● Smallest package size in film capacitors ● For reflow soldering ● RoHS directive compliant 3225/1.0 μF Recommended applications ● Noise ● Audio suppressor circuit Explanation of part number 1 2 3 4 5 6 E C P U 1 C Product code Dielectric & construction Rated voltage 7 8 9 Capacitance 10 11 12 M A 5 Cap. Tol. Suffix Suffix 1C 16 V.DC Code Tape width 5 8 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage – 40 °C to +85 °C 16 V.DC Capacitance range 0.10 μF to 1.0 μF (E6) Capacitance tolerance ±20 %(M) Dissipation factor (tan d) tan d < 1.5 % ( 20 °C, 1 kHz ) Withstand voltage Between terminals : Rated volt (V.DC)×150 %, 60 s C < 0.33 μF : IR > 1000 MΩ (20 °C, 10 V.DC, 60 s) C > 0.33 μF : IR > 300 MΩ ∙ μF (20 °C, 10 V.DC, 60 s) Reflow soldering : 240 °C max. and 30 sec max. at more than 220 °C (Temp. at capacitor surface) Insulation resistance (IR) Soldering conditions ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Construction Dimensions W±0.20 Unit : mm H±0.2 L±0.2 Element (Stacked) Outer electrode g e±0.30 e±0.30 (±0.25) ✽ (±0.25) ✽ ✽ To be applied only for size code J1 Size code J1 H1 H2 H3 G2 L W H e g 2.0 1.25 1.0 0.45 > 0.6 3.2 1.6 0.8 0.65 > 1.0 3.2 1.6 1.0 0.65 > 1.0 3.2 1.6 1.4 0.65 > 1.0 3.2 2.5 1.4 0.65 > 1.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017 Plastic Film Capacitors Taping specification for automatic mounting Refer to the page of taping specifications Rating · Dimensions · Quantity Rated voltage 16 V.DC Capacitance (μF) Dimensions (mm) Part No. L W H Size code 0.10 ECPU1C104MA5 2.0 1.25 1.0 J1 0.15 ECPU1C154MA5 3.2 1.6 0.8 H1 0.22 ECPU1C224MA5 3.2 1.6 0.8 H1 0.33 ECPU1C334MA5 3.2 1.6 1.0 H2 0.47 ECPU1C474MA5 3.2 1.6 1.4 H3 0.68 ECPU1C684MA5 3.2 1.6 1.4 H3 1.0 ECPU1C105MA5 3.2 2.5 1.4 G2 Q'ty 3000 2000 Recommended for land dimensions Unit : mm Electrode Size code C Land A B J1 H1 H2 H3 G2 Land dimensions Reflow soldering A B C 0.8 2.4 1.1 1.8 3.6 1.4 1.8 3.6 1.4 1.8 3.6 1.4 1.8 3.6 2.3 ✽ lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017