ECQU3A684MG

Plastic Film Capacitors Metallized Polyester Film Capacitor Type : ECQUG [Class X1] In accordance with UL/CSA and European safety regulation class X1 Features ● Equipped with a safety mechanism plastic case and non combustible resin ● RoHS directive compliant ● Flame-retardant Recommended applications ● Interference suppressors Explanation of part number 1 2 3 4 5 6 E C Q U 3 A Product code Dielectric & construction 7 Rated voltage 8 9 Capacitance 10 11 M G Cap. Tol. Suffix M ±20 % 12 Suffix Code Lead Form Blank Straight A Cut lead Applicable standard ✽ It is certified as type ECQUG in the following approval. UL CSA Europe International Approval UL60384-14 CAN/CSA E60384-14 EN60384-14 IEC60384-14 Class Class X1 Class X1 Class X1 Class X1 Certification organization UL CSA VDE ✽ When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 μF. ✽ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No.. ✽ European standards marking are ENEC (VDE). But, there are no problem using this capacitor in a device which will get approvals from certification bodies in Europe, NEMKO, FIMKO, SEMKO, DEMKO, and SEV etc. Specifications Category temperature range Rated voltage Rated capacitance Capacitance tolerance Dissipation factor (tan d) Withstand voltage Insulation resistance (IR) −40 °C to +100 °C 300 V.AC 0.010 μF to 1.0 μF (E6) ±20 % (M) tan d < 1.0 % (20 °C, 1 kHz ) Between terminals : 575 V.AC, 1768 V.DC, 60 s Between terminals to enclosure : 2100 V.AC, 60 s C < 0.33 μF : IR > 15000 MΩ (20 °C, 100 V.DC, 60 s) C > 0.33 μF : IR > 5000 MΩ ∙ μF (20 °C, 100 V.DC, 60 s) IR > 2000 MΩ (20 °C, 500 V.DC, 60 s) ✽ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Sep. 2017 Plastic Film Capacitors Dimensions Marking example L±0.5 Cut lead (Suffix A) (A) side (B) side ECQUG 300V~X1 .01 μF 10 4.0±0.5 F±0.4 20 min. H±0.5 T±0.5 0d±0.05 Note : Date code. Copper-clad steel wire Q +1.4 –0.6 (A) (B) P (Lead location limits from center) Unit : mm Rating · Dimensions · Quantity ● Capacitance tolerance : ±20 %(M) Capacitance (μF) Part No. ECQU3A103MG( ECQU3A153MG( ECQU3A223MG( ECQU3A333MG( ECQU3A473MG( ECQU3A683MG( ECQU3A104MG( ECQU3A154MG( ECQU3A224MG( ECQU3A334MG( ECQU3A474MG( ECQU3A684MG( ECQU3A105MG( ) ) ) ) ) ) ) ) ) ) ) ) ) 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 L 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 26.0 26.0 26.0 27.0 T 5.0 5.0 5.0 6.0 6.0 8.0 8.0 8.0 9.0 9.0 10.5 12.5 16.5 Dimensions (mm) H F fd 11.5 12.5 0.6 11.5 12.5 0.6 11.5 12.5 0.6 13.0 12.5 0.6 13.0 12.5 0.6 15.0 12.5 0.6 15.0 12.5 0.6 16.5 15.0 0.8 17.5 15.0 0.8 18.5 22.5 0.8 20.0 22.5 0.8 22.0 22.5 0.8 25.5 22.5 0.8 P 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.50 0±0.75 0±0.75 0±0.75 Q 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.5 1.5 1.5 2.2 Min. order Q'ty Straight Cut lead 500 500 300 400 300 ✽ ( ) : Suffix for lead form Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Sep. 2017