ESE-16J001

Detector Switches/ESE16 ESE16 Detector Switches Type: ESE16 Features Recommended Applications External Dimensions: 2.2 mm×3.35 mm (Height:1.5 mm) Light operating force: 250 mN or less Auto mounting supported: Can be mounted by standard nozzles Detection of media in portable electronic equipment (Mobile phones / Digital still cameras / Camcorders) Explanation of Part Numbers 1 2 3 4 5 Product Code 6 7 Type 8 9 Design No 50 μA 3 V DC to 10 mA 5 V DC (Resistive load) Rating 50 0 mΩ max. (Initial) Contact Resistance Insulation Resistance 100 MΩ min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 2 5 0 m N m a x. Mounting Height 1.5 mm Poles and Throws 1-pole 1-throw Full Travel (Pushing distance) 1.5 mm (1.0 mm) Operating Life Temperature Range 50 ,00 0 cycles min. –10 °C to +60 °C (Standard), –40 °C to +85 °C (Automotive) Heat Resistance +70 °C for 9 6 hours Low Temperature Resistance –25 °C for 9 6 hours Humidity Resistance +40 °C 9 0 % to 95 % RH for 9 6 hours Minimum Quantity/Packing Unit 4,0 0 0 pcs. Embossed Taping (Reel Pack) Quantity/Carton 24,0 0 0 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.12 industrial.panasonic.com/ac/e/ –1–   Panasonic Corporation 2017 ANCTB47E 201712-Fd Detector Switches/ESE16 Dimensions in mm (not to scale) ESE16J001 1-pole 1-throw 2.3 3.35 1.6 2.2 2.65 max. 0.5 PWB land pattern reference (Pitch tolerance: ±0.05) 1.4 3.35 0.45 1.5 1.5 2.2 2.5 Vertical direction ON starting position Full stroke position Circuit Diagram 1-pole 1-throw (N.O) Separate terminal Dummy terminal Separate terminal Dummy terminal Standard Reel Dimensions in mm (not to scale) Taping Reel 16.4 END P=8.0±0.1 4.0±0.1 2.0±0.1 Drawing direction Leading portion 400 mm min TOP Pilot holes 16.0 .1 +0 0 Carrier tape .5 – φ1 7.5±0.1 1.75±0.1 φ380.0±2.0 Embossed Carrier Taping Non-packed portion Packed portion (160 mm min.) Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2–   Panasonic Corporation 2017 ANCTB47E 201712-Fd