ESE-23F001

Detector Switches/ESE23 ESE23 Detector Switches Type: ESE23 Bidirectional operation, midpoint auto-return Type Features Recommended Applications External dimensions : 4.1 mm×5.0 mm, Height 1.5 mm Long over-travel (through-operation available) Usable as an operation switch (an input device) Detection of media in portable electronic equipment (CD-ROM, DVD, Digital still cameras, etc.) Operating switches for other electronic equipment. Explanation of Part Numbers 1 2 3 Product Code 4 5 6 7 Type 6th F J 8 9 Design No. Terminal Type Straight Type J-bent Type Rating 7th 0 1 Positioning Boss Without Boss With Boss 50 μA 3 V DC to 10 mA 5 V DC (Resistive load) 50 0 mΩ max. (Initial) Contact Resistance Insulation Resistance 100 MΩ min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 3 0 0 m N m a x. Mounting Height 1.5 mm Poles and Throws 1-pole 2-throws (OFF at midpoint) Full Travel (Pushing distance) With Boss Without Boss Operating Life Temperature Range 1.0 mm (1.5 mm) 2.2 mm (1.5 mm) 50 ,00 0 cycles min. –10 °C to +60 °C (Standard), –40 °C to +85 °C (Automotive) Heat Resistance +70 °C for 9 6 hours Low Temperature Resistance –25 °C for 9 6 hours Humidity Resistance +40 °C 9 0 % to 95 % RH for 9 6 hours Minimum Quantity/Packing Unit 4,0 0 0 pcs. Embossed Taping (Reel Pack) Quantity/Carton 24,0 0 0 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.06 industrial.panasonic.com/ac/e/ –1–   Panasonic Corporation 2017 ANCTB53E 201706-Fd Detector Switches/ESE23 Dimensions in mm (not to scale) .1 +0 -0 0. 15 2.0 1.5 0.25 0.4 2.0 2.0 .7 φ0 2.0 2.0 2.0 2.0 0.18 φ0.6 5.0 4-0.9 1.5 C 1.0 2.2 2.5 0.25 Pivot center 0.25 0.4 0.8 .1 +0 .7 -0 φ0 C 0.6 0.8 φ0.6 C 0.5 Pivot center 4-0.9 4.15 2.0 1.2 0.5 C 1.4 C 0. 15 1.0 2.2 2.5 0.18 0.55 1.2 2.0 C .1 0.6 On position 2.6 1.8 0.9 R0 0.55 1.4 1.2 2.6 1.8 0.9 5.0 Full position On position 0.25 .1 Full position 1.2 0.35 max. 0.35 max. R0 ESE23F101 Straight terminal with boss (Without Boss ESE23F001) 1-pole 2-throws (0.5) 1-pole 2-throws 4.15 No. 2 ESE23J101 J-bent terminal with boss (Without Boss ESE23J001) 2.0 No. 1 4.2 6.4 4.2 6.4 PWB mounting hole for reference PWB mounting hole for reference (Pitch tolerance : ±0.05) (Pitch tolerance : ±0.05) Circuit Diagram 1-pole 2-throws (N . O) b F a Common terminal Terminal No. Common terminal C C 1 Lever position c 2 F a b 1 2 Standard Reel Dimensions in mm (not to scale) Taping Reel Embossed Carrier Taping END P=8.0±0.1 Drawing direction 4.0±0.1 TOP 2.0±0.1 Leading portion 400 mm min. Pilot holes 13.5 .1 +0 0 Carrier tape .5 φ1 7.5±0.1 1.75±0.1 16.4 16.0±0.3 φ380.0±2.0 Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) (13 blanks min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2–   Panasonic Corporation 2017 ANCTB53E 201706-Fd