EVQP1905M

Light Touch Switches/EVQP0/P1/9P 6 mm Square Long Travel SMD Light Touch Switches Type: EVQP0/EVQP1/EVQ9P ■ Features ● External dimensions : 6.0 mm×6.1 mm, Height 5.0 mm (Including the push plate) ● Steady and low contact resistance (100 mΩ max.) ● Excellent solderability (J-bent-type terminals) ■ Recommended Applications ● Operating switches for car electronic equipment. ● Input on operating switches for telephones, electronic musical instruments, etc. ■ Explanation of Part Numbers 1 2 3 4 P Product Code 5 0 9 6 7 8 9 1 P Type Product Height Push Plate Color Operating Force・Travel ■ Specifications Type Snap action/Push-on type SPST Rating 10 μA 2 V DC to 50 mA 12 V DC (Resistive load) Contact Resistance Electrical 100 mΩ max. Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing Operating Force Mechanical Travel Endurance Operating Life 10 ms max. (ON, OFF) 1.6 N±0.5 N, 2.0 N±0.6 N 2.5 N±0.6 N 3.0 N±0.8 N 3.5 N±1.0 N 2.2 N±0.6 N 2.5 N±0.6 N 1.3 mm±0.2 mm 1.0 mm±0.2 mm 3.5 N type: 30,000 cycles min. 1.6 N, 2.0 N, 2.2 N, 2.5 N, 3.0 N types: 100,000 cycles min. Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 2,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 10,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB37E 201903-Fd Light Touch Switches/EVQP0/P1/9P ■ Dimensions in mm (not to scale) EVQP0 General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. EVQP1 EVQ9P (Embossed Taping) 1.0±0.3 4.5±0.1 B' φ4.6 6.1±0.1 0 7.4 -0.6 .2 R0 A' A 6.0 3.5 5.0 B 0.75 A' B' A B Circuit diagram 4.5±0.1 1.0 3.6 10.0 (4.0) 1.0 PWB land pattern for reference Part Numbers Operating Force Travel Height Push Plate Color Operating Life EVQP1K05M 2.2 N 1.0 mm 5.0 mm Natural 100,000 cycles EVQP1Y05M 2.5 N 1.0 mm 5.0 mm Natural 100,000 cycles EVQP1905M 1.6 N 1.3 mm 5.0 mm Natural 100,000 cycles EVQP1F05M 2.0 N 1.3 mm 5.0 mm Natural 100,000 cycles EVQP1D05M 2.5 N 1.3 mm 5.0 mm Natural 100,000 cycles EVQP0405M 3.0 N 1.3 mm 5.0 mm Natural 100,000 cycles EVQ9P105M 3.5 N 1.3 mm 5.0 mm Natural 30,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB37E 201903-Fd Light Touch Switches/EVQP0/P1/9P ■ Recommended Reflow Soldering Conditions Operation Top (°C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) ● Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P 2 P0 E φD0 B F W A t2 Chip component P1 Tape running direction Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia. EVQP0 EVQP1 EVQ9P 5.0 6.4±0.2 7.9±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5–0 +0.1 t1 t2 0.4±0.1 5.25±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB37E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB37E-1 201903-Fd Specifications are subject to change without notice.