EYGS0909ZLX2

“GraphiteTIM (Compressible Type)” PGS with low thermal resistance EYGS, EYGR type GraphiteTIM (Compressible Type) is a graphite sheet that is dedicated for use as a thermal interface material. The GraphiteTIM (Compressible Type) has very high compressibility compared to standard PGS, which enables reducing the thermal resistance by following gap, warpage, and distortion of targets/substrates. Excellent heat resistance and reliability of the GraphiteTIM help obtaining longer service life and higher performance of various components, such as power modules. The GraphiteTIM (Compressible Type) is cost-saving, because it may allow you to reduce your existing processes. Unlike grease, there is no necessity for printing process , since it is a sheet-type product. There are no problems that are found in grease and phase change materials in the GraphiteTIM, which makes it excellent TIM. Features ●Thermal resistance : 0.2 K∙cm2/W (600 kPa) To draw a good thermal resistance from sheet, pressure the GraphiteTIM. A close adherence would make the product fit into the uneven part and enhance the performance. ●Thermal conductivity : X-Y direction 200 to 400 W/m∙K, Z direction (28 W/m∙K) : 40% or more (600 kPa) ●Compressibility ●High and long term reliability : operating temperature range –55 to 400 °C ●RoHS compliant After pressure to GraphiteTIM. Recommended applications For cooling/heat transfer of electronic devices that generates heat, such as power modules. ● Inverters and converters ● Car-mounted camera, motor control unit, automotive LED, luminous source of laser HUD, medical equipment ● Base station, Server Install in IGBT module IGBT module GraphiteTIM Heatsink Explanation of part numbers ● GraphiteTIM (EYG✽✽✽✽✽Z✽✽✽) 1 2 3 4 5 6 7 8 9 10 11 12 E Y G S 0 9 1 8 Z L X 2 Suffix Product Code PGS Graphite Sheet Style S Standard type R High compressible type Dimension 0909 90 mm × 90 mm 0918 90 mm × 180 mm 1818 180 mm × 180 mm Thickness of GraphiteTIM ZL ZR 200 μm 250 μm 350 μm ✽ Please contact us for custom-made products. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Jan-22 “GraphiteTIM (Compressible Type)” PGS with low thermal resistance Typical characteristics Test method Items Thickness (µm) Thermal resistance (K·cm2/W) Compressibility (%) TIM Tester TIM Tester Thermal conductivity (W/m·K) Laser PIT Flame resistance UL-94V Condition Data 200 250 350 200 kPa 0.6 0.4 0.5 600 kPa 40 55 55 X-Y 400 250 200 Z 28 28 28 V-0 equivalent −55 to 400 Operating temperature range (℃) Typical values, not guaranteed. Thermal resistance and compressibility 1.8 70 EYGS_200µm EYGR_250µm EYGR_350µm 1.4 1.2 1.0 0.8 0.6 50 40 30 20 0.4 10 0.2 0 EYGS_200µm EYGR_250µm EYGR_350µm 60 Compressibility (%) Thermal resistance (K∙cm2/W) 1.6 0 100 200 300 400 500 0 600 0 100 200 Pressure (kPa) 300 400 500 600 Pressure (kPa) Type / Composition example ● GraphiteTIM(Compressible Type) standard form Sheet only Type S type R type - Process for IGBT mounting b Front a Structure Side c Operating temperature range 200 µm 250 µm 350 µm 90 x 90 mm EYGS0909ZLX2 EYGR0909ZLX2 EYGR0909ZRX2 90 x 180 mm EYGS0918ZLX2 EYGR0918ZLX2 EYGR0918ZRX2 180 x 180 mm EYGS1818ZLX2 EYGR1818ZLX2 EYGR1818ZRX2 Thickness：ｃ Standard Part No. −55 ℃ to 400 ℃ ✽ Part numbers listed above are all standard samples for your consideration. ✽✽ Contact us for custom-made samples. We can make samples in various forms and/or dimensions other than standard samples. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Jan-22 “GraphiteTIM (Compressible Type)” PGS with low thermal resistance Type / Composition example ● PGS in IGBT forms Sheet only Type S type R type Process for IGBT mounting b e a Front d Structure ✽ This shape is an example, please contact us for detailed shape of each part Side no. c Operating temperature range −55 ℃ to 400 ℃ 200 µm Thickness：ｃ 250 µm 350 µm Standard Part No. Standard Part No. Standard Part No. a： Lateral size 200 µm 250 µm 350 µm (mm) (mm) 1 EYGS1431ZLAA EYGR1431ZLAA EYGR1431ZRAA 140 308 12 2 EYGS0925ZLWA EYGR0925ZLWA EYGR0925ZRWA 85 246 14 6 73 234 3 EYGS1419ZLWB EYGR1419ZLWB EYGR1419ZRWB 136 186 8 7.5 124 171 4 EYGS0917ZLWC EYGR0917ZLWC EYGR0917ZRWC 85 168 10 6 73 156 No. b：Longitudinal size Hole number Hole diameter d：Lateral hole pitch e：Longitudinal hole pitch (ømm) (mm) (mm) 6 126 290 5 EYGS1316ZLAC EYGR1316ZLAC EYGR1316ZRAC 125 163 8 6.1 110 150 6 EYGS1216ZLWD EYGR1216ZLWD EYGR1216ZRWD 120 160 8 6 110 150 7 EYGS1116ZLMA EYGR1116ZLMA EYGR1116ZRMA 108.8 158 8 6 92.75 144 8 EYGS1315ZLGA EYGR1315ZLGA EYGR1315ZRGA 129.5 150 8 7 118.5 137.5 9 EYGS1314ZLWE EYGR1314ZLWE EYGR1314ZRWE 126 136 6 7.5 114 124 10 EYGS1014ZLAD EYGR1014ZLAD EYGR1014ZRAD 97.8 138 4 6.8 86 127 11 EYGS0714ZLAE EYGR0714ZLAE EYGR0714ZRAE 70 138 4 5.7 57 128 12 EYGS0714ZLAF EYGR0714ZLAF EYGR0714ZRAF 69 136 4 7.2 57 124 13 EYGS1113ZLMB EYGR1113ZLMB EYGR1113ZRMB 106 132 4 5.7 95 121 14 EYGS1313ZLGB EYGR1313ZLGB EYGR1313ZRGB 128 128 4 6.7 110 110 15 EYGS0713ZLAG EYGR0713ZLAG EYGR0713ZRAG 66 126 4 5.7 50 116 16 EYGS0813ZLMD EYGR0813ZLMD EYGR0813ZRMD 71 123 2 4.7 Center 116 17 EYGS1212ZLGC EYGR1212ZLGC EYGR1212ZRGC 120 120 4 5.7 110 110 18 EYGS0912ZLGD EYGR0912ZLGD EYGR0912ZRGD 88 120 4 5.7 78 110 19 EYGS0612ZLWF EYGR0612ZLWF EYGR0612ZRWF 60 120 4 5.7 50 110 20 EYGS0512ZLGE EYGR0512ZLGE EYGR0512ZRGE 53 118 2 5.7 Center 106 21 EYGS0811ZLGH EYGR0811ZLGH EYGR0811ZRGH 80 113 4 5.7 70 103 22 EYGS0811ZLWG EYGR0811ZLWG EYGR0811ZRWG 78 108 4 6.7 62 93 23 EYGS0611ZLWH EYGR0611ZLWH EYGR0611ZRWH 60 106 4 6.7 48 93 24 EYGS0411ZLWJ EYGR0411ZLWJ EYGR0411ZRWJ 43 106 2 5.7 Center 93 25 EYGS0610ZLAH EYGR0610ZLAH EYGR0610ZRAH 59.4 104 4 6.7 48 93 26 EYGS0410ZLAJ EYGR0410ZLAJ EYGR0410ZRAJ 43 103 2 5.7 Center 93 27 EYGS1010ZLME EYGR1010ZLME EYGR1010ZRME 98 98 4 6.7 87 87 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Jan-22 “GraphiteTIM (Compressible Type)” PGS with low thermal resistance Type / Composition example Standard Part No. Standard Part No. Standard Part No. a： Lateral size 200 µm 250 µm 350 µm (mm) (mm) 28 EYGS0409ZLGJ EYGR0409ZLGJ EYGR0409ZRGJ 44 93 29 EYGS0509ZLGK EYGR0509ZLGK EYGR0509ZRGK 46 30 EYGS0309ZLMF EYGR0309ZLMF EYGR0309ZRMF 31 EYGS0409ZLMG EYGR0409ZLMG 32 EYGS0309ZLAK 33 Hole diameter d：Lateral hole pitch e：Longitudinal hole pitch (ømm) (mm) (mm) 2 6.7 Center 80 92 2 6.7 Center 80 32 92 2 6.7 Center 80 EYGR0409ZRMG 41 88 2 5.7 Center 80 EYGR0309ZLAK EYGR0309ZRAK 29.5 90 2 6.6 Center 80 EYGS0509ZLMH EYGR0509ZLMH EYGR0509ZRMH 51 86 2 4.7 – 80 34 EYGS0508ZLMJ EYGR0508ZLMJ EYGR0508ZRMJ 46.2 83 2 4.7 – 77 35 EYGS0608ZLMK EYGR0608ZLMK EYGR0608ZRMK 55 78 2 4.5 Center 40 36 EYGS0607ZLGL EYGR0607ZLGL EYGR0607ZRGL 58 70 4 5.7 50 62 37 EYGS0507ZLML EYGR0507ZLML EYGR0507ZRML 45.3 66 2 4.7 – 60 38 EYGS0407ZLAL EYGR0407ZLAL EYGR0407ZRAL 40 66 1 7.7 Center Center 39 EYGS0506ZLMM EYGR0506ZLMM EYGR0506ZRMM 48 55 1 4.5 Center Center 40 EYGS0404ZLMP EYGR0404ZLMP EYGR0404ZRMP 36 38 1 4.5 Center Center 41 EYGS1018ZLSA EYGR1018ZLSA EYGR1018ZRSA 104.5 183 8 7 93 171 42 EYGS1516ZLSB EYGR1516ZLSB EYGR1516ZRSB 148 158 8 5 137 150 43 EYGS1116ZLSC EYGR1116ZLSC EYGR1116ZRSC 112 158 8 5 101 150 44 EYGS0715ZLSD EYGR0715ZLSD EYGR0715ZRSD 67 153 4 5.6 57 143 45 EYGS0613ZLSE EYGR0613ZLSE EYGR0613ZRSE 61 128 4 5.6 50 116 46 EYGS0612ZLSF EYGR0612ZLSF EYGR0612ZRSF 63.3 124 4 5.6 50 110 47 EYGS0612ZLSG EYGR0612ZLSG EYGR0612ZRSG 61.5 124 4 5.6 50 110 48 EYGS1012ZLSH EYGR1012ZLSH EYGR1012ZRSH 104.5 121 4 6.7 93 109.5 49 EYGS0410ZLSJ EYGR0410ZLSJ EYGR0410ZRSJ 43 103 2 5.7 Center 93 50 EYGS0609ZLSK EYGR0609ZLSK EYGR0609ZRSK 61.5 91 4 5.6 50 77 51 EYGS0606ZLSL EYGR0606ZLSL EYGR0606ZRSL 58 62 2 5.6 44 50 52 EYGS0305ZLSM EYGR0305ZLSM EYGR0305ZRSM 27 51 1 4.6 Center Center 53 EYGS0204ZLSN EYGR0204ZLSN EYGR0204ZRSN 24 37 1 4.6 Center Center 54 EYGS0303ZLSP EYGR0303ZLSP EYGR0303ZRSP 29 32 1 4.5 Center Center 55 EYGS0911ZLDA EYGR0911ZLDA EYGR0911ZRDA 92 109 4 6 78 93 56 EYGS1014ZLDB EYGR1014ZLDB EYGR1014ZRDB 98 138 4 6.7 86 127 No. b：Longitudinal size Hole number Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Jan-22 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21 Graphite Sheets, Graphite-PAD, Graphite-TIM 　　Application Guidelines Precautions on the whole ■Do not use the products beyond the descriptions in this catalog. ■This catalog guarantees the quality of the products as individual components. Before you use the products, please make sure to check and evaluate the products in the circumstance where they are installed in your product. ■This product was designed and manufactured for standard applications such as general electronics devices, office equipment, information and communications equipment, measuring instruments, household appliances and audio-video equipment. For applications in which special quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention and anti-theft devices, and safety equipment), please be sure to consult with our sales representative in advance and to exchange product catalog which conform to such applications. Safety and design considerations ■We are trying to improve the quality and the reliability, but the durability differs depending on the use environment and the use conditions. On use, be sure to confirm the actual product under the actual use conditions. ■Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other signification damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/ gas equipment, rotating equipment, and disaster/crime prevention equipment. ・The system is equipped with a protection circuit and protection device. ・The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. ・The system is equipped with an arresting the spread of fire or preventing glitch. ■When a dogma shall be occurred about safety for this product, be sure to inform us rapidly, operate your technical examination. ■The temperature of this product at the time of use changes depending on mounting conditions and usage conditions, therefore, please confirm that the temperature of this product is the specified temperature after mounting it. ■This product does not take the use under the following special environments into consideration. Accordingly, the use in the following special environments, and such environmental conditions may affect the performance of the product; prior to use, verify the performance, reliability, etc. thoroughly. 1) Use in liquids such as water, oil, chemical, and organic solvent. 2) Use under direct sunlight, in outdoor or in dusty atmospheres. 3) Use in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and NOX. 4) Use the product in a contaminated state. 5) Use in acid. 6) Use outside the range defined by the operating temperature range. 7) Use under reduced pressure or vacuum. 1-Oct-19 Graphite Sheets, Graphite-PAD, Graphite-TIM Precaution of installation ■Do not reuse this product after removal from the mounting board. ■Do not drop this product on the floor. If this product is dropped, it can be damaged mechanically. Avoid using the dropped product. ■This product is soft, do not rub or touch it with rough materials to avoid scratching it. ■Lines or folds in this product may affect thermal conductivity. ■Never touch a this product during use because it may be extremely hot. ■Use protective materials when handling and/or applying this product, do not use items with sharp edges as they might tear or puncture this product. ■Do not handle with bare hands as there is a concern about performance degradation. Precaution on storage conditions ■Storage period is less than one year after our shipping inspection is completed. Please use within the period. ■If the product is stored in the following environments and conditions, the performance may be badly affected, avoid the storage in the following environments. (1) Storage in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and NOX. (2) Storage in places exposed to ultraviolet light. *Recommended storage in the dark. (3) Store at a temperature outside the storage temperature range specified by this catalog. ■In the case of a product configuration that assumes bonding, please use after checking the adhesiveness of the product when the storage period is over. Precaution specific to this product ■This product has conductivity. If required, This product should be provided insulation. ■This product can not guarantee the insulation because there is a concern for powder falling off of conductive materials. ■Thermal conductivity is dependent on the way it is used. Test the adaptability of the product to your application before use. Applicable laws and regulations, others ■No ODCs or other ozone-depleting substances which are subject to regulation under the Montreal Protocol are used in our manufacturing processes, including in the manufacture of this product. ■This product complies with the RoHS Directive （Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU and （EU)2015/863）. ■All the materials used in this part are registered material under the Law Concerning the Examination and Regulation of Manufactures etc. of Chemical substances. ■If you need the notice by letter of "A preliminary judgment on the Laws of Japan foreign exchange and Foreign Trade control", be sure to let us know. ■These products are not dangerous goods on the transportation as identified by UN(United Nations) numbers or UN classification. ■As to the disposal of the module, check the method of disposal in each country or region where the modules are incorporated in your products to be used. ■The technical information in this catalog provides examples of our products typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. 1-Oct-19