LM4562HA

LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier August 2006 LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier General Description The LM4562 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge process technology with state-of-the-art circuit design, the LM4562 audio operational amplifiers deliver superior audio signal amplification for outstanding audio performance. The LM4562 combines extremely low voltage noise density (2.7nV/√Hz) with vanishingly low THD+N (0.00003%) to easily satisfy the most demanding audio applications. To ensure that the most challenging loads are driven without compromise, the LM4562 has a high slew rate of ± 20V/µs and an output current capability of ± 26mA. Further, dynamic range is maximized by an output stage that drives 2kΩ loads to within 1V of either power supply voltage and to within 1.4V when driving 600Ω loads. The LM4562’s outstanding CMRR (120dB), PSRR (120dB), and VOS (0.1mV) give the amplifier excellent operational amplifier DC performance. The LM4562 has a wide supply range of ± 2.5V to ± 17V. Over this supply range the LM4562’s input circuitry maintains excellent common-mode and power supply rejection, as well as maintaining its low input bias current. The LM4562 is unity gain stable. This Audio Operational Amplifier achieves outstanding AC performance while driving complex loads with values as high as 100pF. The LM4562 is available in 8–lead narrow body SOIC, 8–lead Plastic DIP and 8–lead Metal Can TO-99. Demonstration boards are available for each package. j THD+N (AV = 1, VOUT = 3VRMS, fIN = 1kHz) RL = 2kΩ RL = 600Ω j Input Noise Density j Slew Rate j Gain Bandwidth Product j Open Loop Gain (RL = 600Ω) j Input Bias Current j Input Offset Voltage j DC Gain Linearity Error 0.00003% (typ) 0.00003% (typ) 2.7nV/√Hz (typ) ± 20V/µs (typ) 55MHz (typ) 140dB (typ) 10nA (typ) 0.1mV (typ) 0.000009% Features n n n n n Easily drives 600Ω loads Optimized for superior audio signal fidelity Output short circuit protection PSRR and CMRR exceed 120dB (typ) SOIC, DIP, TO-99 metal can packages Applications n n n n n n n n n Ultra high quality audio amplification High fidelity preamplifiers High fidelity multimedia State of the art phono pre amps High performance professional audio High fidelity equalization and crossover networks High performance line drivers High performance line receivers High fidelity active filters Key Specifications j Power Supply Voltage Range ± 2.5V to ± 17V Typical Application 201572K5 Passively Equalized RIAA Phono Preamplifier © 2006 National Semiconductor Corporation DS201572 www.national.com LM4562 Connection Diagrams 20157255 Order Number LM4562MA See NS Package Number — M08A Order Number LM4562NA See NS Package Number — N08E Metal Can 201572F3 Order Number LM4562HA See NS Package Number — H08C www.national.com 2 LM4562 Absolute Maximum Ratings (Notes 1, 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Power Supply Voltage (VS = V+ - V-) Storage Temperature Input Voltage Output Short Circuit (Note 3) Power Dissipation 36V −65˚C to 150˚C (V-) - 0.7V to (V+) + 0.7V Continuous Internally Limited ESD Susceptibility (Note 4) ESD Susceptibility (Note 5) Pins 1, 4, 7 and 8 Pins 2, 3, 5 and 6 Junction Temperature Thermal Resistance θJA (SO) θJA (NA) θJA (HA) θJC (HA) Temperature Range TMIN ≤ TA ≤ TMAX Supply Voltage Range 2000V 200V 100V 150˚C 145˚C/W 102˚C/W 150˚C/W 35˚C/W –40˚C ≤ TA ≤ 85˚C ± 2.5V ≤ VS ≤ ± 17V Electrical Characteristics for the LM4562 (Note 1) The following specifications apply for the circuit shown in Figure X. VS = ± 15V, RL = 2kΩ, RSOURCE = 10Ω, fIN = 1kHz, and TA = 25˚C, unless otherwise specified. LM4562 Symbol Parameter Conditions AV = 1, VOUT = 3Vrms RL = 2kΩ RL = 600Ω AV = 1, VOUT = 3VRMS Two-tone, 60kHz & 7kHz 4:1 Typical (Note 6) THD+N Total Harmonic Distortion + Noise 0.00003 0.00003 0.00005 55 45 Limit (Note 7) Units (Limits) % (max) 0.00009 dB MHz (min) V/µs (min) MHz IMD GBWP SR FPBW Intermodulation Distortion Gain Bandwidth Product Slew Rate Full Power Bandwidth ± 20 VOUT = 1VP-P, –3dB referenced to output magnitude at f = 1kHz AV = –1, 10V step, CL = 100pF 0.1% error range fBW = 20Hz to 20kHz f = 1kHz f = 10Hz f = 1kHz f = 10Hz 10 ± 15 ts Settling time Equivalent Input Noise Voltage 1.2 0.34 2.7 6.4 1.6 3.1 0.65 4.7 µs µVRMS (max) nV/√Hz (max) pA/√Hz en Equivalent Input Noise Density in VOS ∆VOS/∆Temp PSRR ISOCH-CH IB ∆IOS/∆Temp IOS VIN-CM CMRR Current Noise Density Offset Voltage Average Input Offset Voltage Drift vs Temperature Average Input Offset Voltage Shift vs Power Supply Voltage Channel-to-Channel Isolation Input Bias Current Input Bias Current Drift vs Temperature Input Offset Current Common-Mode Input Voltage Range Common-Mode Rejection ± 0.1 –40˚C ≤ TA ≤ 85˚C ∆VS = 20V (Note 8) fIN = 1kHz fIN = 20kHz VCM = 0V –40˚C ≤ TA ≤ 85˚C VCM = 0V 0.2 120 118 112 10 0.1 11 +14.1 –13.9 –10V < Vcm < 10V 120 ± 0.7 mV (max) µV/˚C 110 dB (min) dB 72 nA (max) nA/˚C 65 (V+) – 2.0 (V-) + 2.0 110 nA (max) V (min) dB (min) 3 www.national.com LM4562 Electrical Characteristics for the LM4562 (Note 1) The following specifications apply for the circuit shown in Figure X. VS = ± 15V, RL = 2kΩ, RSOURCE = 10Ω, fIN = 1kHz, and TA = 25˚C, unless otherwise specified. (Continued) LM4562 Symbol Parameter Differential Input Impedance Common Mode Input Impedance Open Loop Voltage Gain –10V < Vcm < 10V –10V < Vout < 10V, RL = 600Ω AVOL –10V < Vout < 10V, RL = 2kΩ –10V < Vout < 10V, RL = 10kΩ RL = 600Ω VOUTMAX IOUT IOUT-CC Maximum Output Voltage Swing Output Current Instantaneous Short Circuit Current fIN = 10kHz Closed-Loop Open-Loop 100pF IOUT = 0mA RL = 2kΩ RL = 10kΩ RL = 600Ω, VS = ± 17V Conditions Typical (Note 6) ZIN 30 1000 140 140 140 125 dB (min) Limit (Note 7) Units (Limits) kΩ MΩ ± 13.6 ± 14.0 ± 14.1 ± 26 +53 –42 0.01 13 16 10 ± 12.5 V (min) ± 23 mA (min) mA ROUT CLOAD IS Output Impedance Capacitive Load Drive Overshoot Total Quiescent Current Ω % 12 mA (max) Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Note 2: Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 3: Amplifier output connected to GND, any number of amplifiers within a package. Note 4: Human body model, 100pF discharged through a 1.5kΩ resistor. Note 5: Machine Model ESD test is covered by specification EIAJ IC-121-1981. A 200pF cap is charged to the specified voltage and then discharged directly into the IC with no external series resistor (resistance of discharge path must be under 50Ω). Note 6: Typical specifications are specified at +25oC and represent the most likely parametric norm. Note 7: Tested limits are guaranteed to National’s AOQL (Average Outgoing Quality Level). Note 8: PSRR is measured as follows: VOS is measured at two supply voltages, ± 5V and ± 15V. PSRR = | 20log(∆VOS/∆VS) |. www.national.com 4 LM4562 Typical Performance Characteristics THD+N vs Output Voltage VCC = 15V, VEE = –15V RL = 2kΩ THD+N vs Output Voltage VCC = 12V, VEE = –12V RL = 2kΩ 20157275 20157274 THD+N vs Output Voltage VCC = 17V, VEE = –17V RL = 2kΩ THD+N vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 2kΩ 20157276 201572I4 THD+N vs Output Voltage VCC = 15V, VEE = –15V RL = 600Ω THD+N vs Output Voltage VCC = 12V, VEE = –12V RL = 600Ω 20157271 201572K2 5 www.national.com LM4562 Typical Performance Characteristics THD+N vs Output Voltage VCC = 17V, VEE = –17V RL = 600Ω (Continued) THD+N vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 600Ω 20157272 201572I6 THD+N vs Output Voltage VCC = 15V, VEE = –15V RL = 10kΩ THD+N vs Output Voltage VCC = 12V, VEE = –12V RL = 10kΩ 20157279 20157278 THD+N vs Output Voltage VCC = 17V, VEE = –17V RL = 10kΩ THD+N vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 10kΩ 20157280 201572I5 www.national.com 6 LM4562 Typical Performance Characteristics THD+N vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS RL = 2kΩ (Continued) THD+N vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS RL = 2kΩ 20157263 20157262 THD+N vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS RL = 2kΩ THD+N vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS RL = 600Ω 20157264 20157259 THD+N vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS RL = 600Ω THD+N vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS RL = 600Ω 201572K3 20157260 7 www.national.com LM4562 Typical Performance Characteristics THD+N vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS RL = 10kΩ (Continued) THD+N vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS RL = 10kΩ 20157267 20157266 THD+N vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS RL = 10kΩ IMD vs Output Voltage VCC = 15V, VEE = –15V RL = 2kΩ 20157268 201572E6 IMD vs Output Voltage VCC = 12V, VEE = –12V RL = 2kΩ IMD vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 2kΩ 201572E5 201572E4 www.national.com 8 LM4562 Typical Performance Characteristics IMD vs Output Voltage VCC = 17V, VEE = –17V RL = 2kΩ (Continued) IMD vs Output Voltage VCC = 15V, VEE = –15V RL = 600Ω 201572E7 201572E2 IMD vs Output Voltage VCC = 12V, VEE = –12V RL = 600Ω IMD vs Output Voltage VCC = 17V, VEE = –17V RL = 600Ω 201572E0 201572E3 IMD vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 600Ω IMD vs Output Voltage VCC = 15V, VEE = –15V RL = 10kΩ 201572F1 201572E1 9 www.national.com LM4562 Typical Performance Characteristics IMD vs Output Voltage VCC = 12V, VEE = –12V RL = 10kΩ (Continued) IMD vs Output Voltage VCC = 17V, VEE = –17V RL = 10kΩ 201572F0 201572F2 IMD vs Output Voltage VCC = 2.5V, VEE = –2.5V RL = 10kΩ Voltage Noise Density vs Frequency 201572E9 201572H6 Current Noise Density vs Frequency Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS AV = 0dB, RL = 2kΩ 201572H7 201572C8 www.national.com 10 LM4562 Typical Performance Characteristics Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 10VRMS AV = 0dB, RL = 2kΩ (Continued) Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS AV = 0dB, RL = 2kΩ 201572C9 201572C6 Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 10VRMS AV = 0dB, RL = 2kΩ Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS AV = 0dB, RL = 2kΩ 201572C7 201572D0 Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 10VRMS AV = 0dB, RL = 2kΩ Crosstalk vs Frequency VCC = 2.5V, VEE = –2.5V, VOUT = 1VRMS AV = 0dB, RL = 2kΩ 201572D1 201572C4 11 www.national.com LM4562 Typical Performance Characteristics Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS AV = 0dB, RL = 600Ω (Continued) Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 10VRMS AV = 0dB, RL = 600Ω 201572D6 201572D7 Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS AV = 0dB, RL = 600Ω Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 10VRMS AV = 0dB, RL = 600Ω 201572D4 201572D5 Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS AV = 0dB, RL = 600Ω Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 10VRMS AV = 0dB, RL = 600Ω 201572D8 201572D9 www.national.com 12 LM4562 Typical Performance Characteristics Crosstalk vs Frequency VCC = 2.5V, VEE = –2.5V, VOUT = 1VRMS AV = 0dB, RL = 600Ω (Continued) Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 3VRMS AV = 0dB, RL = 10kΩ 201572D2 201572C0 Crosstalk vs Frequency VCC = 15V, VEE = –15V, VOUT = 10VRMS AV = 0dB, RL = 10kΩ Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 3VRMS AV = 0dB, RL = 10kΩ 201572C1 201572B8 Crosstalk vs Frequency VCC = 12V, VEE = –12V, VOUT = 10VRMS AV = 0dB, RL = 10kΩ Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 3VRMS AV = 0dB, RL = 10kΩ 201572B9 201572C2 13 www.national.com LM4562 Typical Performance Characteristics Crosstalk vs Frequency VCC = 17V, VEE = –17V, VOUT = 10VRMS AV = 0dB, RL = 10kΩ (Continued) Crosstalk vs Frequency VCC = 2.5V, VEE = –2.5V, VOUT = 1VRMS AV = 0dB, RL = 10kΩ 201572C3 201572B6 PSRR+ vs Frequency VCC = 15V, VEE = –15V RL = 2kΩ, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 15V, VEE = –15V RL = 2kΩ, VRIPPLE = 200mVpp 201572B0 201572B4 PSRR+ vs Frequency VCC = 12V, VEE = –12V RL = 2kΩ, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 12V, VEE = –12V RL = 2kΩ, VRIPPLE = 200mVpp 201572A9 201572B3 www.national.com 14 LM4562 Typical Performance Characteristics PSRR+ vs Frequency VCC = 17V, VEE = –17V RL = 2kΩ, VRIPPLE = 200mVpp (Continued) PSRR- vs Frequency VCC = 17V, VEE = –17V RL = 2kΩ, VRIPPLE = 200mVpp 201572J3 201572J2 PSRR+ vs Frequency VCC = 2.5V, VEE = –2.5V RL = 2kΩ, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 2.5V, VEE = –2.5V RL = 2kΩ, VRIPPLE = 200mVpp 201572A8 201572B2 PSRR+ vs Frequency VCC = 15V, VCC = –15V RL = 600Ω, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 15V, VEE = –15V RL = 600Ω, VRIPPLE = 200mVpp 201572A1 201572A6 15 www.national.com LM4562 Typical Performance Characteristics PSRR+ vs Frequency VCC = 12V, VCC = –12V RL = 600Ω, VRIPPLE = 200mVpp (Continued) PSRR- vs Frequency VCC = 12V, VEE = –12V RL = 600Ω, VRIPPLE = 200mVpp 201572A0 201572A5 PSRR+ vs Frequency VCC = 17V, VCC = –17V RL = 600Ω, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 17V, VCC = –17V RL = 600Ω, VRIPPLE = 200mVpp 201572J4 201572A3 PSRR+ vs Frequency VCC = 2.5V, VCC = –2.5V RL = 600Ω, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 2.5V, VEE = –2.5V RL = 600Ω, VRIPPLE = 200mVpp 20157299 201572A4 www.national.com 16 LM4562 Typical Performance Characteristics PSRR+ vs Frequency VCC = 15V, VEE = –15V RL = 10kΩ, VRIPPLE = 200mVpp (Continued) PSRR- vs Frequency VCC = 15V, VEE = –15V RL = 10kΩ, VRIPPLE = 200mVpp 20157293 20157297 PSRR+ vs Frequency VCC = 12V, VEE = –12V RL = 10kΩ, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 12V, VEE = –12V RL = 10kΩ, VRIPPLE = 200mVpp 20157292 20157296 PSRR+ vs Frequency VCC = 17V, VEE = –17V RL = 10kΩ, VRIPPLE = 200mVpp PSRR- vs Frequency VCC = 17V, VEE = –17V RL = 10kΩ, VRIPPLE = 200mVpp 20157294 20157298 17 www.national.com LM4562 Typical Performance Characteristics PSRR+ vs Frequency VCC = 2.5V, VEE = –2.5V RL = 10kΩ, VRIPPLE = 200mVpp (Continued) PSRR- vs Frequency VCC = 2.5V, VEE = –2.5V RL = 10kΩ, VRIPPLE = 200mVpp 20157291 20157295 CMRR vs Frequency VCC = 15V, VEE = –15V RL = 2kΩ CMRR vs Frequency VCC = 12V, VEE = –12V RL = 2kΩ 201572G0 201572F7 CMRR vs Frequency VCC = 17V, VEE = –17V RL = 2kΩ CMRR vs Frequency VCC = 2.5V, VEE = –2.5V RL = 2kΩ 201572G3 201572F4 www.national.com 18 LM4562 Typical Performance Characteristics CMRR vs Frequency VCC = 15V, VEE = –15V RL = 600Ω (Continued) CMRR vs Frequency VCC = 12V, VEE = –12V RL = 600Ω 201572G2 201572F9 CMRR vs Frequency VCC = 17V, VEE = –17V RL = 600Ω CMRR vs Frequency VCC = 2.5V, VEE = –2.5V RL = 600Ω 201572G5 201572F6 CMRR vs Frequency VCC = 15V, VEE = –15V RL = 10kΩ CMRR vs Frequency VCC = 12V, VEE = –12V RL = 10kΩ 201572G1 201572F8 19 www.national.com LM4562 Typical Performance Characteristics CMRR vs Frequency VCC = 17V, VEE = –17V RL = 10kΩ (Continued) CMRR vs Frequency VCC = 2.5V, VEE = –2.5V RL = 10kΩ 201572G4 201572F5 Output Voltage vs Load Resistance VDD = 15V, VEE = –15V THD+N = 1% Output Voltage vs Load Resistance VDD = 12V, VEE = –12V THD+N = 1% 201572H1 201572H0 Output Voltage vs Load Resistance VDD = 17V, VEE = –17V THD+N = 1% Output Voltage vs Load Resistance VDD = 2.5V, VEE = –2.5V THD+N = 1% 201572H2 201572G9 www.national.com 20 LM4562 Typical Performance Characteristics Output Voltage vs Supply Voltage RL = 2kΩ, THD+N = 1% (Continued) Output Voltage vs Supply Voltage RL = 600Ω, THD+N = 1% 201572J9 201572J8 Output Voltage vs Supply Voltage RL = 10kΩ, THD+N = 1% Supply Current vs Supply Voltage RL = 2kΩ 201572K0 201572J6 Supply Current vs Supply Voltage RL = 600Ω Supply Current vs Supply Voltage RL = 10kΩ 201572J5 201572J7 21 www.national.com LM4562 Typical Performance Characteristics Full Power Bandwidth vs Frequency (Continued) Gain Phase vs Frequency 201572J0 201572J1 Small-Signal Transient Response AV = 1, CL = 10pF Small-Signal Transient Response AV = 1, CL = 100pF 201572I7 201572I8 www.national.com 22 LM4562 Application Information DISTORTION MEASUREMENTS The vanishingly low residual distortion produced by LM4562 is below the capabilities of all commercially available equipment. This makes distortion measurements just slightly more difficult than simply connecting a distortion meter to the amplifier’s inputs and outputs. The solution, however, is quite simple: an additional resistor. Adding this resistor extends the resolution of the distortion measurement equipment. The LM4562’s low residual distortion is an input referred internal error. As shown in Figure 1, adding the 10Ω resistor connected between the amplifier’s inverting and noninverting inputs changes the amplifier’s noise gain. The re- sult is that the error signal (distortion) is amplified by a factor of 101. Although the amplifier’s closed-loop gain is unaltered, the feedback available to correct distortion errors is reduced by 101, which means that measurement resolution increases by 101. To ensure minimum effects on distortion measurements, keep the value of R1 low as shown in Figure 1. This technique is verified by duplicating the measurements with high closed loop gain and/or making the measurements at high frequencies. Doing so produces distortion components that are within the measurement equipment’s capabilities. This datasheet’s THD+N and IMD values were generated using the above described circuit connected to an Audio Precision System Two Cascade. 201572K4 FIGURE 1. THD+N and IMD Distortion Test Circuit 23 www.national.com LM4562 Application Information NOISE MEASUREMENT CIRCUIT (Continued) The LM4562 is a high speed op amp with excellent phase margin and stability. Capacitive loads up to 100pF will cause little change in the phase characteristics of the amplifiers and are therefore allowable. Capacitive loads greater than 100pF must be isolated from the output. The most straightforward way to do this is to put a resistor in series with the output. This resistor will also prevent excess power dissipation if the output is accidentally shorted. 20157227 Complete shielding is required to prevent induced pick up from external sources. Always check with oscilloscope for power line noise. Total Gain: 115 dB @f = 1 kHz Input Referred Noise Voltage: en = V0/560,000 (V) RIAA Preamp Voltage Gain, RIAA Deviation vs Frequency Flat Amp Voltage Gain vs Frequency 20157228 20157229 www.national.com 24 LM4562 Application Information TYPICAL APPLICATIONS NAB Preamp (Continued) NAB Preamp Voltage Gain vs Frequency 20157231 20157230 AV = 34.5 F = 1 kHz En = 0.38 µV A Weighted Balanced to Single Ended Converter Adder/Subtracter 20157233 VO = V1 + V2 − V3 − V4 20157232 VO = V1–V2 Sine Wave Oscillator 20157234 25 www.national.com LM4562 Application Information (Continued) Second Order Low Pass Filter (Butterworth) Second Order High Pass Filter (Butterworth) 20157235 20157236 Illustration is f0 = 1 kHz Illustration is f0 = 1 kHz State Variable Filter 20157237 Illustration is f0 = 1 kHz, Q = 10, ABP = 1 www.national.com 26 LM4562 Application Information (Continued) AC/DC Converter 20157238 2 Channel Panning Circuit (Pan Pot) Line Driver 20157239 20157240 27 www.national.com LM4562 Application Information (Continued) Tone Control 20157241 Illustration is: fL = 32 Hz, fLB = 320 Hz fH =11 kHz, fHB = 1.1 kHz 20157242 RIAA Preamp 20157203 Av = 35 dB En = 0.33 µV S/N = 90 dB f = 1 kHz A Weighted A Weighted, VIN = 10 mV @ f = 1 kHz www.national.com 28 LM4562 Application Information (Continued) Balanced Input Mic Amp 20157243 Illustration is: V0 = 101(V2 − V1) 29 www.national.com LM4562 Application Information (Continued) 10 Band Graphic Equalizer 20157244 fo (Hz) 32 64 125 250 500 1k 2k 4k 8k 16k Note 9: At volume of change = ± 12 dB Q = 1.7 C1 0.12µF 0.056µF 0.033µF 0.015µF 8200pF 3900pF 2000pF 1100pF 510pF 330pF C2 4.7µF 3.3µF 1.5µF 0.82µF 0.39µF 0.22µF 0.1µF 0.056µF 0.022µF 0.012µF R1 75kΩ 68kΩ 62kΩ 68kΩ 62kΩ 68kΩ 68kΩ 62kΩ 68kΩ 51kΩ R2 500Ω 510Ω 510Ω 470Ω 470Ω 470Ω 470Ω 470Ω 510Ω 510Ω Reference: “AUDIO/RADIO HANDBOOK”, National Semiconductor, 1980, Page 2–61 www.national.com 30 LM4562 Revision History Rev 0.05 Date 5/24/05 Description Added edits and changes per TW Chan’s and M Koterasawa-san’s inputs and conference call (5/20/05). Changed part number to LM4562. Updates based on inputs from design after KPC review. Edited 201572 55 (pkg drwg) and added the M08A mktg outline. Mjor edits on the EC table (by Heather). Input major text (Typical limits) edits. Some text edits. Edited Typical values on Zin. Added the Typ. Perf. Curves and some text edits. Added the 2 curves (Voltage/Current Noise Density vs Freq.) Replaced some of the curves. Added more curves. Initial WEB. Changed the Typical values on Instantaneous Short Circuit Current from +30/-38 into +53/-42 (per Robin S.), then re-released the D/S to the WEB. 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 5/25/05 10/5/05 11/01/05 02/02/06 05/31/06 06/07/06 08/02/06 08/07/06 0.50 0.55 0.56 0.57 08/08/06 08/10/06 08/16/06 08/22/06 31 www.national.com LM4562 Physical Dimensions inches (millimeters) unless otherwise noted Narrow SOIC Package Order Number LM4562MA NS Package Number M08A Dual-In-Line Package Order Number LM4562NA NS Package Number N08E www.national.com 32 LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier Physical Dimensions inches (millimeters) unless otherwise noted (Continued) TO-99 Metal Can Package Order Number LM4562HA NS Package Number H08C National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. BANNED SUBSTANCE COMPLIANCE National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C2) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/quality/green. Lead free products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.