74ALVC125
Quad buffer/line driver; 3-state
Rev. 5 — 7 July 2023
Product data sheet
1. General description
The 74ALVC125 is a quad non-inverting buffer/line driver with 3-state outputs. The 3-state outputs
(nY) are controlled by the output enable input (nOE). A HIGH on the nOE pin causes the outputs to
assume a high-impedance OFF-state.
Schmitt trigger action on all inputs makes the device tolerant of slow rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry
disables the output, preventing the potentially damaging backflow current through the device when
it is powered down.
2. Features and benefits
•
•
•
•
•
•
•
•
•
•
Wide supply voltage range from 1.65 V to 3.6 V
CMOS low power dissipation
Overvoltage tolerant inputs to 3.6 V
Direct interface with TTL levels
IOFF circuitry provides partial Power-down mode operation
Latch-up performance exceeds 250 mA per JESD78 Class II.A
Complies with JEDEC standards:
• JESD8-7 (1.65 V to 1.95 V)
• JESD8-5 (2.3 V to 2.7 V)
• JESD8C/JESD36 (2.7 V to 3.6 V)
ESD protection:
• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
• CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
Multiple package options
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
Name
Description
Version
-40 °C to +125 °C
SO14
plastic small outline package; 14 leads;
body width 3.9 mm
SOT108-1
74ALVC125PW -40 °C to +125 °C
TSSOP14
plastic thin shrink small outline package; 14 leads;
body width 4.4 mm
SOT402-1
74ALVC125BQ
DHVQFN14 plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 14 terminals;
body 2.5 × 3 × 0.85 mm
74ALVC125D
-40 °C to +125 °C
SOT762-1
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
4. Functional diagram
2
1A
1Y
1
1OE
5
2A
4
2OE
9
3A
3
2
2Y
6
3OE
12
4A
13
4OE
8
6
9
8
10
4Y
11
3
EN1
4
11
13
nOE
mna229
Logic symbol
Fig. 2.
nY
nA
12
mna228
Fig. 1.
1
5
3Y
10
1
IEC logic symbol
mna227
Fig. 3.
Logic diagram (one buffer)
5. Pinning information
5.1. Pinning
1Y
3
12 4A
2OE
4
11 4Y
2A
5
10 3OE
2Y
6
9
3A
GND
7
8
3Y
1OE
1
14 VCC
1A
2
13 4OE
14 VCC
13 4OE
1A
2
1Y
3
12 4A
2OE
4
11
1Y
3
12 4A
2A
5
2OE
4
11 4Y
2Y
6
2A
5
10 3OE
8
2
PW package
SOT402-1 (TSSOP14)
2Y
6
9
3A
3Y
1A
terminal 1
index area
1
14 VCC
7
1
GND
7
8
3Y
GND
1OE
1OE
BQ package
SOT762-1 (DHVQFN14)
D package
SOT108-1 (SO14)
4Y
10 3OE
9
3A
aaa-035261
Transparent top view
aaa-035260
aaa-035259
GND(1)
13 4OE
(1) This is not a ground pin. There is no electrical or mechanical requirement to solder
the pad. In case soldered, the solder land should remain floating or connected to GND.
5.2. Pin description
Table 2. Pin description
Symbol
Pin
Description
1A, 2A, 3A, 4A
2, 5, 9, 12
data input
1Y, 2Y, 3Y, 4Y
3, 6, 8, 11
bus output
1OE, 2OE, 3OE, 4OE
1, 4, 10, 13
output enable (active LOW)
VCC
14
supply voltage
GND
7
ground (0 V)
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
2 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
6. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X= don’t care; Z = high-impedance OFF-state.
Output
Input
nOE
nA
nY
L
L
L
L
H
H
H
X
Z
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
VCC
supply voltage
VI
input voltage
VO
output voltage
Conditions
output HIGH or LOW state
Min
Max
Unit
-0.5
+4.6
V
[1]
-0.5
+4.6
V
[1]
-0.5
VCC + 0.5 V
output 3-state
-0.5
+4.6
V
Power-down mode; VCC = 0 V
-0.5
+4.6
V
IIK
input clamping current
VI < 0 V
-50
-
mA
IOK
output clamping current
VO > VCC or VO < 0 V
-
±50
mA
IO
output current
VO = 0 V to VCC
-
±50
mA
ICC
supply current
-
100
mA
IGND
ground current
-100
-
mA
Tstg
storage temperature
-65
+150
°C
Ptot
total power dissipation
-
500
mW
[1]
[2]
Tamb = -40 °C to +125 °C
[2]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
For SOT108-1 (SO14) package: Ptot derates linearly with 10.1 mW/K above 100 °C.
For SOT402-1 (TSSOP14) package: Ptot derates linearly with 7.3 mW/K above 81 °C.
For SOT762-1 (DHVQFN14) package: Ptot derates linearly with 9.6 mW/K above 98 °C.
8. Recommended operating conditions
Table 5. Recommended operating conditions
Symbol
Parameter
Conditions
Min
Max
Unit
VCC
supply voltage
1.65
3.6
V
VI
input voltage
0
3.6
V
VO
output voltage
output HIGH or LOW state
0
VCC
V
output 3-state
0
3.6
V
Power-down mode; VCC = 0 V
0
3.6
V
-40
+125
°C
Tamb
ambient temperature
in free air
Δt/ΔV
input transition rise and fall rate
VCC = 1.65 V to 2.7 V
0
20
ns/V
VCC = 2.7 V to 3.6 V
0
10
ns/V
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
3 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
VIH
HIGH-level input
voltage
VIL
LOW-level input
voltage
VOH
VOL
Conditions
-40 °C to +85 °C
Unit
Min
Typ[1]
Max
Min
Max
0.65 × VCC
-
-
0.65 × VCC
-
V
VCC = 2.3 V to 2.7 V
1.7
-
-
1.7
-
V
VCC = 2.7 V to 3.6 V
2.0
-
-
2.0
-
V
VCC = 1.65 V to 1.95 V
-
-
0.35 × VCC
-
VCC = 2.3 V to 2.7 V
-
-
0.7
-
0.7
V
VCC = 2.7 V to 3.6 V
-
-
0.8
-
0.8
V
VCC - 0.2
-
-
VCC - 0.2
-
V
IO = -6 mA; VCC = 1.65 V
1.25
1.51
-
1.25
-
V
IO = -12 mA; VCC = 2.3 V
1.8
2.10
-
1.8
-
V
IO = -18 mA; VCC = 2.3 V
1.7
2.01
-
1.7
-
V
IO = -12 mA; VCC = 2.7 V
2.2
2.53
-
2.2
-
V
IO = -18 mA; VCC = 3.0 V
2.4
2.76
-
2.4
-
V
IO = -24 mA; VCC = 3.0 V
2.2
2.68
-
2.2
-
V
IO = 100 μA;
VCC = 1.65 V to 3.6 V
-
-
0.2
-
0.2
V
IO = 6 mA; VCC = 1.65 V
-
0.11
0.3
-
0.3
V
IO = 12 mA; VCC = 2.3 V
-
0.17
0.4
-
0.4
V
IO = 18 mA; VCC = 2.3 V
-
0.25
0.6
-
0.6
V
IO = 12 mA; VCC = 2.7 V
-
0.16
0.4
-
0.4
V
IO = 18 mA; VCC = 3.0 V
-
0.23
0.4
-
0.45
V
IO = 24 mA; VCC = 3.0 V
-
0.30
0.55
-
0.55
V
VCC = 1.65 V to 1.95 V
HIGH-level output VI = VIH or VIL
voltage
IO = -100 μA;
VCC = 1.65 V to 3.6 V
LOW-level output
voltage
-40 °C to +125 °C
0.35 × VCC V
VI = VIH or VIL
II
input leakage
current
VCC = 3.6 V;
VI = 3.6 V or GND
-
±0.1
±5
-
±20
μA
IOZ
OFF-state output
current
VI = VIH or VIL;
VCC = 1.65 V to 3.6 V;
VO = 3.6 V or GND
-
±0.1
±10
-
±80
μA
IOFF
power-off leakage VCC = 0 V;
current
VI or VO = 0 V to 3.6 V
-
±0.1
±10
-
±80
μA
ICC
supply current
VCC = 3.6 V;
VI = VCC or GND; IO = 0 A
-
0.2
10
-
80
μA
ΔICC
additional supply
current
per input pin;
VCC = 3.0 V to 3.6 V;
VI = VCC - 0.6 V; IO = 0 A
-
5
750
-
750
μA
CI
input capacitance
-
3.5
-
-
-
pF
[1]
All typical values are measured at VCC = 3.3 V (unless stated otherwise) and Tamb = 25 °C.
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
4 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
10. Dynamic characteristics
Table 7. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 6.
Symbol Parameter
ten
Typ[1]
Max
Min
Max
VCC = 1.65 V to 1.95 V
1.3
2.4
5.3
1.3
6.1
ns
VCC = 2.3 V to 2.7 V
1.0
1.7
3.2
1.0
3.7
ns
VCC = 2.7 V
1.0
2.0
3.1
1.0
3.6
ns
VCC = 3.0 V to 3.6 V
1.1
1.8
2.8
1.1
3.2
ns
VCC = 1.65 V to 1.95 V
1.4
3.9
6.4
1.4
7.4
ns
VCC = 2.3 V to 2.7 V
1.0
2.2
4.1
1.0
4.7
ns
VCC = 2.7 V
1.0
2.7
4.3
1.0
4.9
ns
VCC = 3.0 V to 3.6 V
1.0
1.9
3.5
1.0
4.0
ns
VCC = 1.65 V to 1.95 V
1.8
3.9
5.9
1.8
6.8
ns
VCC = 2.3 V to 2.7 V
1.0
2.1
3.4
1.0
3.9
ns
VCC = 2.7 V
1.0
2.9
4.0
1.0
4.6
ns
VCC = 3.0 V to 3.6 V
1.4
2.7
4.0
1.4
4.6
ns
CPD
outputs HIGH or LOW state
-
27
-
-
-
pF
outputs 3-state
-
5
-
-
-
pF
[2]
[2]
nOE to nY; see Fig. 5
disable time
power dissipation
capacitance
-40 °C to +125 °C Unit
Min
nOE to nY; see Fig. 5
enable time
tdis
[3]
-40 °C to +85 °C
propagation delay nA to nY; see Fig. 4
tpd
[1]
[2]
Conditions
[2]
per buffer; VI = GND to VCC;
VCC = 3.3 V
[3]
Typical values are measured at Tamb = 25 °C
tpd is the same as tPHL and tPLH.
ten is the same as tPZH and tPZL.
tdis is the same as tPHZ and tPLZ.
CPD is used to determine the dynamic power dissipation (PD in μW).
2
2
PD = CPD × VCC × fi × N + Σ(CL × VCC × fo) where:
fi = input frequency in MHz; fo = output frequency in MHz;
CL = output load capacitance in pF; VCC = supply voltage in V;
2
N = number of inputs switching; Σ(CL × VCC × fo) = sum of the outputs.
10.1. Waveforms and test circuit
VI
VM
nA input
GND
tPHL
tPLH
VOH
VM
nY output
VOL
mna230
Measurement points are given in Table 8.
VOL and VOH are the typical output voltage levels that occur with the output load.
Fig. 4.
Input nA to output nY propagation delay times
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
5 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
VI
nOE input
VM
GND
tPLZ
tPZL
VCC
output
LOW-to-OFF
OFF-to-LOW
VM
VX
VOL
tPHZ
tPZH
VOH
VY
output
HIGH-to-OFF
OFF-to-HIGH
GND
VM
outputs
enabled
outputs
enabled
outputs
disabled
mna362
Measurement points are given in Table 8.
VOL and VOH are the typical output voltage levels that occur with the output load.
Fig. 5.
Enable and disable times
Table 8. Measurement points
Supply voltage
Input
Output
VCC
VM
VM
VX
VY
1.65 V to 1.95 V
0.5 × VCC
0.5 × VCC
VOL + 0.15 V
VOH - 0.15 V
2.3 V to 2.7 V
0.5 × VCC
0.5 × VCC
VOL + 0.15 V
VOH - 0.15 V
2.7 V
1.5 V
1.5 V
VOL + 0.3 V
VOH - 0.3 V
3.0 V to 3.6 V
1.5 V
1.5 V
VOL + 0.3 V
VOH - 0.3 V
VEXT
VCC
G
VI
RL
VO
DUT
RT
CL
RL
mna616
Test data is given in Table 9.
Definitions for test circuit:
RL = Load resistance;
CL = Load capacitance including jig and probe capacitance;
RT = Termination resistance should be equal to output impedance ZO of the pulse generator;
VEXT = External voltage for measuring switching times.
Fig. 6.
Test circuit for measuring switching times
Table 9. Test data
Supply voltage
Input
Load
VEXT
VI
tr, tf
CL
RL
tPLH, tPHL
tPLZ, tPZL
tPHZ, tPZH
1.65 V to 1.95 V
VCC
≤ 2.0 ns
30 pF
1 kΩ
open
2 × VCC
GND
2.3 V to 2.7 V
VCC
≤ 2.0 ns
30 pF
500 Ω
open
2 × VCC
GND
2.7 V
2.7 V
≤ 2.5 ns
50 pF
500 Ω
open
6V
GND
3.0 V to 3.6 V
2.7 V
≤ 2.5 ns
50 pF
500 Ω
open
6V
GND
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
6 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
11. Package outline
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
D
E
A
X
c
y
HE
v M A
Z
8
14
A2
Q
A
(A 3)
A1
pin 1 index
θ
Lp
1
L
7
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
mm
1.75
0.25
0.10
1.45
1.25
0.25
0.49
0.36
0.25
0.19
8.75
8.55
4.0
3.8
1.27
6.2
5.8
1.05
1.0
0.4
0.7
0.6
0.25
0.25
0.1
0.7
0.3
inches
0.069
0.010 0.057
0.004 0.049
0.01
0.019 0.0100 0.35
0.014 0.0075 0.34
0.16
0.15
0.05
0.01
0.01
0.004
0.028
0.012
0.244
0.039 0.028
0.041
0.228
0.016 0.024
θ
o
8
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
Fig. 7.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT108-1
076E06
MS-012
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Package outline SOT108-1 (SO14)
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
7 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
D
SOT402-1
E
A
X
c
y
HE
v M A
Z
8
14
Q
A2
pin 1 index
(A 3 )
A1
A
θ
Lp
1
L
7
detail X
w M
bp
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
1.1
0.15
0.05
0.95
0.80
0.25
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
0.65
6.6
6.2
1
0.75
0.50
0.4
0.3
0.2
0.13
0.1
0.72
0.38
8o
0o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT402-1
Fig. 8.
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-18
MO-153
Package outline SOT402-1 (TSSOP14)
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
8 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
14 terminals; body 2.5 x 3 x 0.85 mm
B
D
SOT762-1
A
A
A1
E
c
detail X
terminal 1
index area
terminal 1
index area
C
e1
e
v
w
b
2
6
C A B
C
y
y1 C
L
1
7
14
8
Eh
e
k
13
9
Dh
X
k
0
2
Dimensions (mm are the original dimensions)
Unit
mm
max
nom
min
A(1)
1
A1
b
0.05 0.30
0.02 0.25
0.00 0.18
4 mm
scale
c
D(1)
Dh
E(1)
Eh
e
e1
0.2
3.1
3.0
2.9
1.65
1.50
1.35
2.6
2.5
2.4
1.15
1.00
0.85
0.5
2
k
L
v
0.2
0.5
0.4
0.3
0.1
w
y
0.05 0.05
y1
0.1
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
Outline
version
SOT762-1
Fig. 9.
References
IEC
JEDEC
JEITA
sot762-1_po
European
projection
Issue date
15-04-10
15-05-05
MO-241
Package outline SOT762-1 (DHVQFN14)
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
9 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
12. Abbreviations
Table 10. Abbreviations
Acronym
Description
CDM
Charged Device Model
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
TTL
Transistor-Transistor Logic
13. Revision history
Table 11. Revision history
Document ID
Release date
Data sheet status
Change notice Supersedes
74ALVC125 v.5
20230707
Product data sheet
-
Modifications:
•
•
•
74ALVC125 v.4
20210430
Modifications:
•
•
74ALVC125 v.3
20200924
Modifications:
•
•
•
•
Specifications added for Tamb = -40 °C to +125 °C.
Section 1 updated.
Section 2: updated; ESD specification updated according to the latest JEDEC standard.
20080110
•
74ALVC125
Product data sheet
-
74ALVC125 v.3
Product data sheet
-
74ALVC125 v.2
The format of this data sheet has been redesigned to comply with the identity
guidelines of Nexperia.
Legal texts have been adapted to the new company name where appropriate.
Table 4: Derating values for Ptot total power dissipation have been updated.
Package outline drawing of SOT762-1 (Fig. 9) updated.
Modifications:
74ALVC125 v.1
Product data sheet
Section 2: Reference to JESD36 removed.
Table 4: Derating values for Ptot total power dissipation updated (errata).
74ALVC125 v.2
•
•
•
•
74ALVC125 v.4
Product data sheet
-
74ALVC125 v.1
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
Legal texts have been adapted to the new company name where appropriate.
Section 3: DHVQFN14 package added.
Section 7: derating values added for DHVQFN14 package.
Section 11: outline drawing added for DHVQFN14 package.
20021118
Product specification
-
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
-
©
Nexperia B.V. 2023. All rights reserved
10 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
14. Legal information
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status
[1][2]
Product
status [3]
Definition
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Preliminary [short]
data sheet
Qualification
This document contains data from
the preliminary specification.
Product [short]
data sheet
Production
This document contains the product
specification.
[1]
[2]
[3]
Please consult the most recently issued document before initiating or
completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
74ALVC125
Product data sheet
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
11 / 12
74ALVC125
Nexperia
Quad buffer/line driver; 3-state
Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................2
5.1. Pinning.........................................................................2
5.2. Pin description............................................................. 2
6. Functional description................................................. 3
7. Limiting values............................................................. 3
8. Recommended operating conditions..........................3
9. Static characteristics....................................................4
10. Dynamic characteristics............................................ 5
10.1. Waveforms and test circuit........................................ 5
11. Package outline.......................................................... 7
12. Abbreviations............................................................ 10
13. Revision history........................................................10
14. Legal information......................................................11
©
Nexperia B.V. 2023. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 7 July 2023
74ALVC125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 July 2023
©
Nexperia B.V. 2023. All rights reserved
12 / 12