MRF5S9150HR5

Freescale Semiconductor Technical Data Document Number: MRF5S9150H Rev. 1, 5/2006 RF Power Field Effect Transistors MRF5S9150HR3 MRF5S9150HSR3 Designed for N - CDMA base station applications with frequencies from 869 to 960 MHz. Suitable for multicarrier amplifier applications. • Typical Single - Carrier N - CDMA Performance @ 880 MHz: VDD = 28 Volts, IDQ = 1500 mA, Pout = 33 Watts Avg., IS - 95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13). Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain — 19.7 dB Drain Efficiency — 28.4% ACPR @ 750 kHz Offset — - 46.8 dBc in 30 kHz Bandwidth • Capable of Handling 10:1 VSWR, @ 28 Vdc, 880 MHz, 150 Watts CW Output Power Features • Characterized with Series Equivalent Large - Signal Impedance Parameters • Internally Matched for Ease of Use • Qualified Up to a Maximum of 32 VDD Operation • Integrated ESD Protection • Lower Thermal Resistance Package • Low Gold Plating Thickness on Leads, 40μ″ Nominal. • RoHS Compliant • In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel. 880 MHz, 33 W AVG., 28 V SINGLE N - CDMA LATERAL N - CHANNEL RF POWER MOSFETs CASE 465 - 06, STYLE 1 NI - 780 MRF5S9150HR3 CASE 465A - 06, STYLE 1 NI - 780S MRF5S9150HSR3 Table 1. Maximum Ratings Rating Symbol Value Unit Drain - Source Voltage VDSS - 0.5, +68 Vdc Gate - Source Voltage VGS - 0.5, +15 Vdc Storage Temperature Range Tstg - 65 to +150 °C Case Operating Temperature TC 150 °C Operating Junction Temperature TJ 200 °C Symbol Value (1) Unit Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 80°C, 150 W CW Case Temperature 76°C, 33 W CW RθJC 0.34 0.34 ARCHIVE INFORMATION ARCHIVE INFORMATION N - Channel Enhancement - Mode Lateral MOSFETs °C/W Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22 - A114) Class 1C (Minimum) Machine Model (per EIA/JESD22 - A115) A (Minimum) Charge Device Model (per JESD22 - C101) III (Minimum) 1. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2006. All rights reserved. RF Device Data Freescale Semiconductor MRF5S9150HR3 MRF5S9150HSR3 1 Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Zero Gate Voltage Drain Leakage Current (VDS = 68 Vdc, VGS = 0 Vdc) IDSS — — 10 μAdc Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) IDSS — — 1 μAdc Gate - Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) IGSS — — 500 nAdc Gate Threshold Voltage (VDS = 10 Vdc, ID = 600 μAdc) VGS(th) 2 3 4 Vdc Gate Quiescent Voltage (VDS = 28 Vdc, ID = 1500 mAdc, Measured in Functional Test) VGS(Q) 3 4 5 Vdc Drain - Source On - Voltage (VGS = 10 Vdc, ID = 3.15 Adc) VDS(on) 0.1 0.2 0.3 Vdc Reverse Transfer Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss — 3.1 — pF Output Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Coss — 91.5 — pF Off Characteristics Dynamic Characteristics (1) Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 1500 mA, Pout = 33 W Avg. N - CDMA, f = 880 MHz, Single - Carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carrier. ACPR measured in 30 kHz Channel Bandwidth @ ±750 kHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain Gps 18.5 19.7 21.5 dB Drain Efficiency ηD 26.5 28.4 — % ACPR — - 46.8 - 45 dBc IRL — - 20 -9 dB Adjacent Channel Power Ratio Input Return Loss 1. Part internally input matched. ARCHIVE INFORMATION ARCHIVE INFORMATION On Characteristics MRF5S9150HR3 MRF5S9150HSR3 2 RF Device Data Freescale Semiconductor VBIAS VSUPPLY B1 R2 + + C14 C18 C19 R1 C15 C16 C20 C21 C22 L2 C17 L1 C8 Z9 RF INPUT Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z13 Z14 Z15 Z16 C5 Z17 RF OUTPUT C2 C7 C4 Z12 C6 Z8 C1 C3 C10 Z10 Z11 C11 C9 C12 C13 L3 DUT VSUPPLY + Z1 Z2 Z3, Z17 Z4 Z5 Z6 Z7 Z8 Z9 0.416″ 0.851″ 0.410″ 0.055″ 0.434″ 0.200″ 0.077″ 0.221″ 0.193″ x 0.080″ x 0.080″ x 0.080″ x 0.220″ x 0.220″ x 0.220″ x 0.630″ x 0.630″ x 0.630″ Microstrip Microstrip Microstrip Microstrip Microstrip x 0.630″ Taper Microstrip Microstrip Microstrip Z10 Z11 Z12 Z13 Z14 Z15 Z16 PCB C25 C26 C27 0.105″ x 0.630″ Microstrip 0.200″ x 0.630″ x 0.220″ Taper 0.236″ x 0.220″ Microstrip 0.195″ x 0.220″ Microstrip 0.059″ x 0.220″ Microstrip 0.989″ x 0.080″ Microstrip 0.284″ x 0.080″ Microstrip Arlon GX - 0300 - 55 - 22, 0.030″, εr = 2.55 Figure 1. MRF5S9150HR3(HSR3) Test Circuit Schematic Table 5. MRF5S9150HR3(HSR3) Test Circuit Component Designations and Values Part Description Part Number Manufacturer B1 Small Ferrite Bead 2743019447 Fair Rite C1, C2, C17 47 pF Chip Capacitors 100B470JP500X ATC C3, C12 0.8 - 8.0 pF Variable Capacitors, Gigatrim 27291SL Johanson C4 13 pF Chip Capacitor 100B130JP500X ATC C5, C6 15 pF Chip Capacitors 100B150JP500X ATC C7, C8 12 pF Chip Capacitors 100B120JP500X ATC C9, C10 4.3 pF Chip Capacitors 100B4R3JP500X ATC C11 8.2 pF Chip Capacitor 100B8R2JP500X ATC C13 0.6 - 4.5 pF Variable Capacitor, Gigatrim 27271SL Johanson C14 22 pF Chip Capacitor 100B220JP500X ATC C15 1 μF, 50 V Tantalum Capacitor T491C105K0J0AS Kemit C16 20K pF Chip Capacitor CDR353P203AK0S Kemit C18, C23 180 pF Chip Capacitors 100B181JP500X ATC C19, C20, C21, C24, C25, C26 10 μF, 50 V Chip Capacitors (2220) GRM55DR61H106KA88B Murata C22, C27 470 μF, 63 V Electrolytic Capacitors KME63VB471M12x25LL United Chemi - Con L1, L2, L3 12.5 nH Inductors A04T Coilcraft R1 180 kΩ, 1/4 W Chip Resistor R2 10 Ω, 1/4 W Chip Resistor ARCHIVE INFORMATION ARCHIVE INFORMATION C23 C24 MRF5S9150HR3 MRF5S9150HSR3 RF Device Data Freescale Semiconductor 3 C22 C14 900 MHz Rev. 3 B1 C16 C19 C15 C20 C21 R2 R1 C18 C17 C5 C7 C9 L2 C3 C4 C6 L3 C11 C12 C8 C10 C13 C2 C23 C24 C25 C26 C27 Figure 2. MRF5S9150HR3(HSR3) Test Circuit Component Layout ARCHIVE INFORMATION ARCHIVE INFORMATION C1 CUT OUT AREA L1 MRF5S9150HR3 MRF5S9150HSR3 4 RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS 17.6 17.2 24 −40 −45 −50 IRL ACPR −55 −60 ALT1 16 840 850 860 870 880 890 900 910 −65 920 −3 −8 −13 −18 −23 −28 ARCHIVE INFORMATION 18 16.8 f, FREQUENCY (MHz) Figure 3. Single - Carrier N - CDMA Broadband Performance @ Pout = 33 Watts Avg. 39 37 VDD = 28 Vdc, Pout = 66 W (Avg.) IDQ = 1500 mA, N−CDMA IS−95 (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 17.5 17 35 −40 16.5 16 ACPR −45 IRL −50 15.5 15 −55 ALT1 14.5 840 850 860 870 880 890 −3 −35 900 910 −60 920 −8 −13 −18 −23 −28 IRL, INPUT RETURN LOSS (dB) 41 Gps 18 ηD, DRAIN EFFICIENCY (%) 19 18.5 Gps, POWER GAIN (dB) 43 ηD ACPR (dBc), ALT1 (dBc) 19.5 f, FREQUENCY (MHz) Figure 4. Single - Carrier N - CDMA Broadband Performance @ Pout = 66 Watts Avg. −10 IMD, THIRD ORDER INTERMODULATION DISTORTION (dBc) 22 IDQ = 2250 mA 21 Gps, POWER GAIN (dB) ARCHIVE INFORMATION 26 VDD = 28 Vdc, Pout = 33 W (Avg.) IDQ = 1500 mA, N−CDMA IS−95 (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 18.4 16.4 28 IRL, INPUT RETURN LOSS (dB) Gps, POWER GAIN (dB) 19.2 18.8 30 ηD ACPR (dBc), ALT1 (dBc) Gps 19.6 ηD, DRAIN EFFICIENCY (%) 32 20 1875 mA 20 1500 mA 19 1125 mA 18 VDD = 28 Vdc f1 = 880 MHz, f2 = 880.1 MHz Two−Tone Measurements 750 mA 17 16 VDD = 28 Vdc f1 = 880 MHz, f2 = 880.1 MHz Two−Tone Measurements −20 2250 mA −30 IDQ = 750 mA −40 −50 1875 mA 1500 mA −60 1125 mA −70 1 10 100 Pout, OUTPUT POWER (WATTS) PEP Figure 5. Two - Tone Power Gain versus Output Power 400 1 10 100 400 Pout, OUTPUT POWER (WATTS) PEP Figure 6. Third Order Intermodulation Distortion versus Output Power MRF5S9150HR3 MRF5S9150HSR3 RF Device Data Freescale Semiconductor 5 IMD, INTERMODULATION DISTORTION (dBc) −10 VDD = 28 Vdc, IDQ = 1500 mA f1 = 880 MHz, f2 = 880.1 MHz Two−Tone Measurements −20 −30 −40 3rd Order −50 −60 5th Order −70 −80 7th Order −90 1 10 100 0 VDD = 28 Vdc, Pout = 150 W (PEP) IDQ = 1500 mA, Two−Tone Measurements (f1 + f2)/2 = Center Frequency of 880 MHz −10 −20 −30 3rd Order −40 5th Order −50 7th Order −60 1 0.1 400 10 Pout, OUTPUT POWER (WATTS) PEP TWO−TONE SPACING (MHz) Figure 7. Intermodulation Distortion Products versus Output Power Figure 8. Intermodulation Distortion Products versus Tone Spacing 61 Ideal P6dB = 54.52 dBm (283.14 W) Pout, OUTPUT POWER (dBm) 59 P3dB = 53.84 dBm (242.1 W) 57 55 P1dB = 52.87 dBm (193.64 W) Actual 53 51 49 VDD = 28 Vdc, IDQ = 1500 mA Pulsed CW, 8 μsec(on), 1 msec(off) f = 880 MHz 47 45 25 27 29 31 33 35 37 39 41 Pin, INPUT POWER (dBm) −20 60 VDD = 28 Vdc, IDQ = 1500 mA f = 880 MHz, N−CDMA IS−95 (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 50 −30_C 85_C 25_C 40 85_C 30 ηD 20 Gps TC = −30_C 85_C 25_C 10 0 1 −40 25_C −50 ACPR ALT1 −30 −30_C 10 100 −60 −70 −80 300 ACPR, ADJACENT CHANNEL POWER RATIO (dBc) ALT1, CHANNEL POWER (dBc) ηD, DRAIN EFFICIENCY (%), Gps, POWER GAIN (dB) Figure 9. Pulse CW Output Power versus Input Power 100 ARCHIVE INFORMATION ARCHIVE INFORMATION IMD, INTERMODULATION DISTORTION (dBc) TYPICAL CHARACTERISTICS Pout, OUTPUT POWER (WATTS) AVG. Figure 10. Single - Carrier N - CDMA ACPR, ALT1, Power Gain and Drain Efficiency versus Output Power MRF5S9150HR3 MRF5S9150HSR3 6 RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS 23 70 −30_C 85_C 50 21 25_C 20 40 85_C 30 19 18 VDD = 28 Vdc IDQ = 1500 mA f = 880 MHz 17 ARCHIVE INFORMATION Gps 20 ηD 10 16 0 0.1 1 10 100 Pout, OUTPUT POWER (WATTS) CW Figure 11. Power Gain and Drain Efficiency versus CW Output Power 21 IDQ = 1500 mA f = 880 MHz Gps, POWER GAIN (dB) 20 19 18 17 16 V 20 V 24 V 28 V 32 V VDD = 12 V 16 0 50 100 150 200 250 300 Pout, OUTPUT POWER (WATTS) CW Figure 12. Power Gain versus Output Power MTTF FACTOR (HOURS X AMPS2) 1010 109 ARCHIVE INFORMATION Gps, POWER GAIN (dB) TC = −30_C ηD, DRAIN EFFICIENCY (%) 60 22 108 107 90 100 110 120 130 140 150 160 170 180 190 200 210 TJ, JUNCTION TEMPERATURE (°C) This above graph displays calculated MTTF in hours x ampere2 drain current. Life tests at elevated temperatures have correlated to better than ±10% of the theoretical prediction for metal failure. Divide MTTF factor by ID2 for MTTF in a particular application. Figure 13. MTTF Factor versus Junction Temperature MRF5S9150HR3 MRF5S9150HSR3 RF Device Data Freescale Semiconductor 7 N - CDMA TEST SIGNAL −10 −20 −30 1 −40 −50 0.1 (dB) PROBABILITY (%) 10 IS−95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 1.2288 MHz Channel Bandwidth Carriers. ACPR Measured in 30 kHz Bandwidth @ ±750 kHz Offset. ALT1 Measured in 30 kHz Bandwidth @ ±1.98 MHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. 0.01 0.001 −70 −80 −90 0.0001 ARCHIVE INFORMATION −60 0 2 4 6 8 10 1.2288 MHz Channel BW .. .................................................. . . . . ............ .. .. .. .. .. .. . .. ... . .. . −ALT1 in 30 kHz +ALT1 in 30 kHz . .. . Integrated BW Integrated BW .................. ......... .......... ..... .......... . . ................ ...... ... .. . . . . . . . .............. ................. ......... ........... ... ...... ...... ......... .......... . . . . . . . . . ......... ...... . . . ....... −ACPR in 30 kHz +ACPR in 30 kHz .................. . . . . .. .... . . ............ ....... ............... . ........ . ................ ... . . . . . Integrated BW Integrated BW ........ ...... ........... ...... ... .......... ........... −100 PEAK−TO−AVERAGE (dB) Figure 14. Single - Carrier CCDF N - CDMA −110 −3.6 −2.9 −2.2 −1.5 −0.7 0 0.7 1.5 2.2 2.9 f, FREQUENCY (MHz) Figure 15. Single - Carrier N - CDMA Spectrum 3.6 ARCHIVE INFORMATION 100 MRF5S9150HR3 MRF5S9150HSR3 8 RF Device Data Freescale Semiconductor f = 910 MHz Zload f = 850 MHz Zo = 5 Ω f = 850 MHz ARCHIVE INFORMATION ARCHIVE INFORMATION Zsource f = 910 MHz VDD = 28 Vdc, IDQ = 1500 mA, Pout = 33 W Avg. f MHz Zsource W Zload W 850 3.61 - j2.30 1.12 + j0.09 865 2.85 - j2.54 1.24 + j0.22 880 2.13 - j2.47 1.31 + j0.36 895 1.53 - j2.27 1.46 + j0.48 910 1.02 - j1.90 1.61 + j0.53 Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground. Output Matching Network Device Under Test Input Matching Network Z source Z load Figure 16. Series Equivalent Source and Load Impedance MRF5S9150HR3 MRF5S9150HSR3 RF Device Data Freescale Semiconductor 9 ARCHIVE INFORMATION ARCHIVE INFORMATION NOTES MRF5S9150HR3 MRF5S9150HSR3 10 RF Device Data Freescale Semiconductor PACKAGE DIMENSIONS G Q bbb 2X 1 M T A M B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. M 3 B K 2 (FLANGE) D bbb T A M B M M M bbb ARCHIVE INFORMATION N M T A M B M ccc M T A M M aaa M T A M M T A M B (LID) B S (LID) ccc H R (INSULATOR) M (INSULATOR) B M C F E A T A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. 4X Z (LID) B 1 K 2X 2 B D bbb M T A M B M N M R (LID) ccc M T A M B M ccc M T A M T A M S (INSULATOR) bbb M B M aaa M T A M (LID) B M (INSULATOR) B M H C 3 E A A (FLANGE) MILLIMETERS MIN MAX 33.91 34.16 9.65 9.91 3.18 4.32 12.57 12.83 0.89 1.14 0.08 0.15 27.94 BSC 1.45 1.70 4.32 5.33 19.66 19.96 19.60 20.00 3.00 3.51 9.27 9.53 9.27 9.52 0.127 REF 0.254 REF 0.381 REF CASE 465 - 06 ISSUE G NI - 780 MRF5S9150HR3 4X U (FLANGE) (FLANGE) INCHES MIN MAX 1.335 1.345 0.380 0.390 0.125 0.170 0.495 0.505 0.035 0.045 0.003 0.006 1.100 BSC 0.057 0.067 0.170 0.210 0.774 0.786 0.772 0.788 .118 .138 0.365 0.375 0.365 0.375 0.005 REF 0.010 REF 0.015 REF STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE SEATING PLANE (FLANGE) DIM A B C D E F G H K M N Q R S aaa bbb ccc F T DIM A B C D E F H K M N R S U Z aaa bbb ccc INCHES MIN MAX 0.805 0.815 0.380 0.390 0.125 0.170 0.495 0.505 0.035 0.045 0.003 0.006 0.057 0.067 0.170 0.210 0.774 0.786 0.772 0.788 0.365 0.375 0.365 0.375 −−− 0.040 −−− 0.030 0.005 REF 0.010 REF 0.015 REF MILLIMETERS MIN MAX 20.45 20.70 9.65 9.91 3.18 4.32 12.57 12.83 0.89 1.14 0.08 0.15 1.45 1.70 4.32 5.33 19.61 20.02 19.61 20.02 9.27 9.53 9.27 9.52 −−− 1.02 −−− 0.76 0.127 REF 0.254 REF 0.381 REF ARCHIVE INFORMATION B STYLE 1: PIN 1. DRAIN 2. GATE 5. SOURCE SEATING PLANE CASE 465A - 06 ISSUE H NI - 780S MRF5S9150HSR3 MRF5S9150HR3 MRF5S9150HSR3 RF Device Data Freescale Semiconductor 11 Home Page: www.freescale.com E - mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1 - 800 - 521 - 6274 or +1 - 480 - 768 - 2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1 - 8 - 1, Shimo - Meguro, Meguro - ku, Tokyo 153 - 0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1 - 800 - 441 - 2447 or 303 - 675 - 2140 Fax: 303 - 675 - 2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. ARCHIVE INFORMATION ARCHIVE INFORMATION How to Reach Us: Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. MRF5S9150HR3 MRF5S9150HSR3 Document Number: MRF5S9150H Rev. 1, 5/2006 12 RF Device Data Freescale Semiconductor