NXP LPCXpresso Motor
Control Kit
Fast time-to-market for motor control
This universal platform, designed for the evaluation, development, and debugging of low-voltage
motor-control applications, supports control of BLDC, BLAC, stepper, and dual-brushed DC motors.
Key features
} Flexible microcontroller sockets
- Socket for LPCXpresso LPC1114, LPC11C24, LPC1343,
and LPC1769
- Socket for LPC1100 Cortex-M0TM in PLCC44 package
- Expansion connector LPC1800, LPC4000, LPC2900 and
other NXP ARMTM microcontrollers
} Motor control
- 300 W max output to motors
- 4-phases (based on NXP PMSN2R6-40YS NMOSFET),
accessed via screw terminals
- 100% duty cycle supported
- Voltage measurement (on three phases and virtual ground)
- Current measurement (in-phase on three phases and
common low-side)
- Input current measurement including over-current trip
- Break functionality
- Hall & QEI sensor inputs connected via screw terminals
- Temperature sensor
} Communication interfaces
- USB, Ethernet, and CAN (if supported by MCU)
- RS422/485 and UART-to-USB
} User interface
- 5-key joystick switch
- 96x64 pixel OLED
} Other
- Reset push-button
- Onboard 15 W power supply (+11, +5 or +3.3 V)
- I2C EEPROM for user data
- SWD/JTAG debugging connector
} Power supply input
- 2.1 mm input jack, or via screw terminals
- 12-30 V, 17 A max
} Board measures 200 x 150 mm
To support fast time-to-market for motor-control applications,
NXP offers the low-cost LPCXpresso Motor Control Kit, a
universal development platform created in partnership with
Embedded Artists. It is an ideal way to prototype a motorcontrol project or simply explore motor-control functionality. It
supports control of brushless DC (BLDC), brushless AC (BLAC),
stepper, and dual-brushed DC motors.
The main board has two full H-bridges, so up to four phases
can be controlled with up to 100% duty cycle. Phase voltage,
as well as in-phase current can be measured on three phases,
and virtual ground voltage and common low-side current can be
measured, too. For safety and protection, there is an input
over-current trip protection. When the motor is generating
power the actively controlled breaking circuitry becomes
enabled, and above a certain bus voltage level the circuit
breaks automatically. For design flexibility, there are several
communications interfaces, including USB, Ethernet, CAN,
RS-422/485, and a UART-to-USB bridge. The board also has a
small graphic user interface (96x64 pixel OLED) with a joystick,
to allow for simple, intuitive human interaction.
The kit is available through NXP’s distribution partners.
The LPCXpresso Motor Control Kit
Ordering information
Item no.
Name
Contents
} LPCXpresso Motor Control Board
} L PCXpresso LPC1114 board with LPC-Link
OM13009
LPCXpresso
Motor Control Kit
} LPCXpresso Eclipse-based IDE and GNU compiler
} BLDC motor with hall sensors
} 24 V power supply (60 W)
www.nxp.com
© 2011 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
Date of release: September 2011
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable
Document order number : 9397 750 17179
and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication
Printed in the Netherlands
thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
很抱歉,暂时无法提供与“OM13009,598”相匹配的价格&库存,您可以联系我们找货
免费人工找货