D2JW-011-MD

D2JW Sealed Subminiature Basic Switch Ultra-small and Highly Sealed O Degree of protection conforms to JIS Waterproof standard and IEC IP67. (Excluding the terminals on terminal models) O Wide range of operating temperatures from −40°C to +85°C. D 2 J W O Gold-alloy crossbar contact and coil spring offer long durability and high contact reliability. RoHS Compliant Model Number Legend 1 @ 2 @ 3 D2JW-01@ 1. Actuator None : Pin plunger 2. Contact form 1: SPDT K1A : Short hinge lever K1 : Hinge lever 2: SPST-NC (Molded lead wire models only) 3: SPST-NO (Molded lead wire models only) K2 : Hinge roller Lever K3 : Simulated roller hinge lever 3. Terminals None : Solder terminals -MD : Molded lead wires List of Models Actuator Pin plunger Terminals Contact form Solder terminals SPDT Molded lead wires Solder terminals Short hinge lever Molded lead wires Molded lead wires Molded lead wires Molded lead wires SPST-NO D2JW-013-MD SPDT D2JW-01K1A1 SPDT D2JW-01K1A1-MD SPST-NC D2JW-01K1A2-MD D2JW-01K1A3-MD SPDT D2JW-01K11 SPDT D2JW-01K11-MD SPST-NC D2JW-01K12-MD D2JW-01K13-MD SPDT D2JW-01K21 SPDT D2JW-01K21-MD SPST-NC D2JW-01K22-MD SPST-NO Solder terminals Simulated Roller Hinge Lever Models D2JW-011-MD D2JW-012-MD SPST-NO Solder terminals Hinge Roller Lever Models SPDT SPST-NC SPST-NO Solder terminals Hinge Lever Models Model D2JW-011 D2JW-01K23-MD SPDT D2JW-01K31 SPDT D2JW-01K31-MD SPST-NC D2JW-01K32-MD SPST-NO D2JW-01K33-MD Contact form OSPDT COM NO NC (Black) (Blue) (Red) OSPST-NC COM (Black) OSPST-NO NC (Red) COM NO (Black) (Blue) The color in parentheses indicates the color of the lead wire. 1 D2JW Sealed Subminiature Basic Switch Contact Specifications Contact Characteristics Specification Crossbar Permissible operating speed Material Gold alloy Permissible operating frequency Gap (standard value) Inrush current 0.5 mm D 2 J W Mechanical Electrical NC 0.1A max. Insulation resistance NO 0.1A max. Contact resistance (initial value) Minimum applicable load (see note) 5 VDC 1 mA Dielectric strength * 1 Ratings Rated voltage Resistive load 30 VDC 0.1A 1 mm to 250 mm/s (for pin plunger models) 240 operations/min 30 operations/min 100 MΩ min. (at 500 VDC with insulation tester) Solder terminal models Molded lead wire models Mechanical Durability * 3 Electrical Solder terminal models Degree of protection 140 mΩ max. Between terminals of the same polarity Between current-carrying metal parts and ground Between each terminal and non-current-carrying metal parts Vibration Malfunction resistance * 2 Durability Shock resistance Malfunction * 2 Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min 100 mΩ max. Molded lead wire models Ambient operating temperature Ambient operating humidity Weight 600 VAC 50/60 Hz 1min 1,000 VAC 50/60 Hz 1min 1,000 VAC 50/60 Hz 1min 10 to 55 Hz, 1.5 mm double amplitude 1,000 m/s2 {approx. 100G} max. 2 200 m/s {approx. 20G} max. 1,000,000 operations min. (60 operations/min) 100,000 operations min. (30 operations/min) IEC IP67 (excluding the terminals on terminal models) IEC IP67 −40°C to +85°C (at ambient humidity of 60% max.) (with no icing or condensation) 35% to 98% (for +5°C to +35°C) Approx. 0.6g (for pin plunger models with terminals) Note. The data given above are initial values. *1. The dielectric strength values shown apply for use with Separator (refer to page 4). *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. Mounting Holes (Unit: mm) M2.3 mounting screw hole 4.8±0.1 Dimensions (Unit: mm) /Operating Characteristics Dimensions and operating characteristics of other actuator models for lead wire models are omitted in the illustration below, as the dimensions other than the termial part and operatiing characteristics is common with Solder terminal models. OPin plunger models D2JW-011 1.6 dia. PT A Operating characteristics Operating Force Releasing Force OP 9.4 12.3 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 2.8 +0.05 2.35−0.025 1.3 1 2 2.5+0.05 −0.025 dia. OF Max. RF Min. 0.5 +0.05 2.35−0.025 dia. 0.4 Operating Position OP Operating Force Releasing Force OF Max. RF Min. 2.45 N {250 gf} 0.98 N {100 gf} 0.6 mm 0.3 mm 0.1 mm 8.1±0.3 mm 5.3±0.1 4.8±0.05 3.95 3.95 3.95 12.7 OShort hinge lever models D2JW-01K1A1 1.8 7.95 PT t0.3 Stainless-steel A lever R11.5 OP 3 6.15 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 9.4 12.3 2.8 +0.05 2.35−0.025 1.3 1 2 2.5+0.05 −0.025 dia. +0.05 2.35−0.025 dia. 4.8±0.05 3.95 3.95 3.95 12.7 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 2 0.5 0.4 5.3±0.1 Operating Position OP 1.15 N {117 gf} 0.23 N {23 gf} 5.4 mm 0.7 mm 0.5 mm 8.4±0.8 mm D2JW OHinge lever models D2JW-01K11 Sealed Subminiature Basic Switch 7.95 1.8 A PT t0.3 Stainless-steel lever R16.5 3 Operating Force Releasing Force OP 6.15 9.4 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 12.3 2.8 +0.05 2.35−0.025 1.3 1 2 2.5+0.05 −0.025 dia. +0.05 2.35−0.025 dia. OF Max. RF Min. 0.5 0.4 Operating Position OP 0.80 N {82 gf} 0.15 N {16 gf} 6.4 mm 1.4 mm 0.7 mm 8.4±0.8 mm D 2 J W 5.3±0.1 4.8±0.05 3.95 3.95 3.95 12.7 OSimulated roller lever hinge models D2JW-01K31 PT 1.8 7.95 5.35 R1.3 1.3 1.9 t0.3 Stainless-steel lever 3 A Operating Force Releasing Force OP 6.15 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 9.4 12.3 2.8 +0.05 2.35−0.025 1.3 1 2 2.5+0.05 −0.025 dia. +0.05 2.35−0.025 dia. OF Max. RF Min. 0.5 0.4 Operating Position OP Operating Force Releasing Force OF Max. RF Min. 0.95 N {97 gf} 0.19 N {20 gf} 5.5 mm 1.1 mm 0.6 mm 10.3±0.8mm 5.3±0.1 4.8±0.05 3.95 3.95 3.95 12.7 OHinge roller lever models D2JW-01K21 7.95 1.8 PT 4.8×2.2 dia. Polyacetal resin roller A R13.5 OP 6.15 9.4 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 12.3 2.8 +0.05 2.35−0.025 1.3 1 2 2.5+0.05 −0.025 dia. +0.05 2.35−0.025 dia. 0.5 0.4 Operating Position OP Operating Force Releasing Force OF Max. RF Min. 0.98 N {100 gf} 0.19 N {20 gf} 5.2 mm 1.1 mm 0.5 mm 14.6±0.8 mm 5.3±0.1 4.8±0.05 3.95 3.95 3.95 12.7 OMolded lead wire models D2JW-01@@@-MD 1.6 dia. PT A 0.05 2.35−+0.025 dia. 2.35+−0.05 0.025 OP 15.3 2.5+−0.05 0.025 dia. 4.8±0.05 3.95 Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 8.7 Operating Position OP 2.45 N {250 gf} 0.98 N {100 gf} 0.6 mm 0.3 mm 0.1 mm 8.1±0.3 mm AVS 0.3 300±10 Note. When ordering, replace @ with the code for the actuator and contact form that you need. 5±2 COM NO NC (Black) (Blue) (Red) 12.7 5.3±0.1 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 3 D2JW Sealed Subminiature Basic Switch Precautions +Please refer to "Basic Switches Common Precautions" for correct use. Cautions OTerminal Connection Correct Use OMounting Before soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole. Complete the soldering at the iron tip temperature till 250°C within 3 seconds, and do not apply any external force for 1 D minute after soldering. Soldering at an excessively high 2 temperature or soldering for more than 3 seconds may J W deteriorate the characteristics of the Switch. ODegree of Protection • The Switch was tested and found to meet the conditions necessary to meet the following standard given below. The test checks for water intrusion after immersion for a specified time period, not for switching operation underwater. JIS C0920: Degrees of protection provided by enclosures of electrical apparatus (IP Code) IEC 60529: Degrees of protection provided by enclosures (IP Code) Degree of protection: IP67 (check water intrusion after immersion for 30 min. submerged 1m underwater) Use M2.3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.20 to 0.29 N·m {2 to 3 kgf·cm}. OWiring Molded Lead Wire Models When wiring molded lead wire models, ensure that there is no weight applied on the wire and that the wire is not bent. Otherwise, damage to the Switch or deterioration in the sealing may result. OUsing Micro Loads Even when using micro load models within the operating range, if inrush/surge current occurs, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. OProtection Against Chemicals Prevent the Switch from coming into contact with oil or chemicals. Otherwise, damage to or deterioration of Switch materials may result. Separator (sold separately) SEPARATOR FOR D2JW 2-2.4±0.1 dia. 10.4 5.2 4.8±0.1 3.6 12 t=0.18 Note. The material of the separator is EAVTC (epoxy alkyd/varnish tetron cloth). Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2007-2020 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. 4 Cat. No. B040-E1-06 0220(0207)(O)