E2FX2Y1

Resin-case Proximity Sensor E2F D29I-E-01 Proximity Sensor with Resin Case with Superb Water Resistance • Rugged, watertight plastic housing offers good chemical resistance and withstands washdown; IP68 protection • Wide operating voltages: 10 to 30 VDC and 20 to 264 VAC • Operation indicator on all models • Short-circuit protection available on all DC and some AC models • Mutual interference prevention with models with different frequencies is also available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 5. Ordering Information Sensors [Refer to Dimensions on page 6.] Model Sensing distance Model Operation mode Output configuration NO M8 Shielded M12 M18 M30 1.5 mm 2 mm 5 mm 10 mm NC DC 3-wire, NPN E2F-X1R5E1 2M E2F-X1R5E2 2M AC 2-wire E2F-X1R5Y1 2M E2F-X1R5Y2 2M DC 3-wire, NPN E2F-X2E1 2M *1 E2F-X2E2 2M *1 AC 2-wire E2F-X2Y1 2M *1 E2F-X2Y2 2M *1 DC 3-wire, NPN E2F-X5E1 2M *1 E2F-X5E2 2M *1 AC 2-wire DC 3-wire, NPN *1 E2F-X5Y1 2M *2 E2F-X10E1 2M *1 E2F-X10E2 2M *1 AC 2-wire *1 E2F-X10Y1 2M *2 E2F-X10Y2 2M *2 *1 E2F-X5Y2 2M *2 *1 *1. Models with different frequencies are also available. The model numbers are E2F-X@@@5 (e.g., E2F-X5E15). *2. Models are also available with short-circuit protection. The model numbers are E2F-X@Y@-53 (e.g., E2FX5Y1-53). The power supply voltage, however, is 100 to 120 VAC. 1 E2F Ordering Information Accessories (Order Separately) Protective Covers Refer to Y92@ for details. Mounting Brackets Special resin mounting sleeves: Four different models available. Simply select the size that fits the outside diameter of the Sensor. Mounting Bracket Dimensions A Item B Model E G F D C Y92E-B8 Y92E-B12 Y92E-B18 Y92E-B30 Dimension (mm) A B C D E 18±0.2 24±0.2 32±0.2 45±0.2 10 max. 12.5 max. 17 max. 17 max. 18 20 30 50 8 dia. 12 dia. 18 dia. 30 dia. 28 max. 37 max. 47 max. 60 max. F 6 6 7 10 Applied Applicable hexagonal Sensor G bolts diameter 7.4 dia. M4 × 20 M8 8 dia. M4 × 25 M12 9.8 dia. M5 × 32 M18 9.8 dia. M5 × 50 M30 Note: Consider the influence of surrounding metal when mounting non-shielded Sensors. (Refer to information on individual Sensors for dimensions.) Material: Mounting Bracket: Polyacetal Hexagonal bolt and spring washer: Nickel-plated iron Nut Sets These nut sets are for mounting the Sensors. Order them if you lose the mounting nuts supplied with the sensor. Order the correct set for the outer diameter of your Sensor. Model Item Applicable Sensor Y92E-NWM12-E2F Applicable Sensor diameter Set contents M8 Y92E-NWM08-E2F E2F M12 Y92E-NWM18-E2F M18 Y92E-NWM30-E2F M30 Clamping nuts (polyacetal): 2 2 E2F Ratings and Specifications Model Item E2F-X1R5E@ E2F-X1R5Y@ E2F-X2E@ E2F-X2Y@ E2F-X5E@ E2F-X5Y@ E2F-X10E@ E2F-X10Y@ Sensing distance 1.5 mm ±10% 2 mm ±10% 5 mm ±10% 10 mm ±10% Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 4 mm 0 to 8 mm Differential travel 10% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 3.) Standard sensing object Iron, 8 × 8 × 1 mm Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1 mm Response frequency *1 E Models: 2 kHz, Y Models: 25 Hz E Models: 1.5 kHz, Y Models: 25 Hz E Models: 600 Hz, Y Models: 25 Hz E Models: 400 Hz, Y Models: 25 Hz Power supply voltage (operating voltage range) E Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Y Models: 24 to 240 VAC (20 to 264 VAC) Current consumption E Models: 17 mA max. Leakage current Y Models: 1.7 mA max. at 200 VAC (Refer to Engineering Data on page 3.) Control output Load current E Models: 200 mA max. Y Models: 5 to 100 mA E Models: 200 mA max. Y Models: 5 to 300 mA Residual voltage E Models: 2 V max. (Load current: 200 mA, Cable length: 2 m) Y Models: Refer to Engineering Data on page 4. Indicators E1 Models: Detection indicator (red), E2 Models: Operation indicator (red) Y Models: Operation indicator (red) Operation mode (with sensing object approaching) E1/Y1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 4 for details. E2/Y2 Models: NC Protection circuits E Models: Reverse polarity protection, Load short-circuit protection, Surge suppressor; Y Models: None Ambient temperature range Operating/Storage: −25 to 70°C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C Voltage influence E Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength E Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: (M8 Models): 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case (Other M8 Models): 4,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP68, in-house standards: oil-resistant *2 Connection method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 40 g Approx. 50 g Approx. 130 g Approx. 170 g Case Sensing Materials surface Clamping nuts Accessories Polyarylate resin Polyacetal Instruction manual *1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *2. When using the Sensor in environments subject to splashing cutting oil, deterioration may result due to the additives in the oil. The E2E is recommended in such environments. OMRON Test Method Usage conditions: 10 m or less under water in natural conditions 1. No water ingress after 1 hour under water at 2 atmospheres of pressure. 2. Sensing distance and insulation resistance specifications must be met after 20 repetitions of 1 hour in 0°C water and 1 hour in 70°C water. 3 E2F Engineering Data (Reference Value) Sensing Area Leakage Current E2F-X@Y@ 10 E2F-X2 E2F-X10 Y X E2F-X1R5 E2F-X5 Leakage current (mA) 2 E2F-X5@@/-X10@@ Distance X (mm) Distance X (mm) E2F-X1R5@@/-X2@@ 2.0 Protective resistance mA V 1.5 AC power 50/60 Hz Proximity Sensor (OFF) 5 1 1.0 Y X 0 −6 0 −15 −2 0 2 4 6 E2F-X1R5 Sensing Head E2F-X2 Sensing Head Distance Y (mm) −4 −5 0 5 10 15 E2F-X5 Sensing Head E2F-X10 Sensing Head Distance Y (mm) −10 0 50 100 150 200 250 Power supply voltage (V) Influence of Sensing Object Size and Material 2.5 d× d X E2F-X2@@ Distance X (mm) Distance X (mm) E2F-X1R5@@ t = 1 mm 2.0 Iron 1.5 2.4 2.2 d× d X 2 t = 1 mm 1.8 Iron Stainless steel (SUS304) 1.6 1.4 Stainless steel (SUS304) 1.2 1 1.0 Brass 0.5 Brass 0.8 0.6 Aluminum Aluminum 0.4 0.2 5 10 15 20 25 Side length of sensing object: d (mm) Distance X (mm) E2F-X5@@ 7 d× d X 6 0 5 10 15 20 25 Side length of sensing object: d (mm) E2F-X10@@ t = 1 mm Iron 5 4 Stainless steel (SUS304) 3 Distance X (mm) 0 12 11 10 d× d X 2 Aluminum 1 Iron 9 8 Stainless steel (SUS304) 7 6 5 Brass t = 1 mm Brass 4 3 Aluminum 2 1 0 5 10 15 20 25 30 35 40 45 50 Side length of sensing object: d (mm) 0 10 20 30 40 50 60 Side length of sensing object: d (mm) 4 E2F Residual Output Voltage 30 25 20 Residual Output Voltage 15 10 0 Residual Load Voltage 1 3 5 10 30 Residual output voltage 100 ON 80 V 60 240 Residual output voltage 200 ON 160 V 120 VL VL 100 VAC A 40 VL 200 VAC A 80 24 VAC A 5 120 ON V E2F-X@Y@ at 200 VAC Load voltage VL (V) E2F-X@Y@ at 100 VAC Load voltage VL (V) Load voltage VL (V) E2F-X@Y@ at 24 VAC 20 OFF 50 100 300 500 Load current (mA) 0 40 Residual load voltage 1 3 5 10 30 OFF 50 100 300 500 Load current (mA) 0 Residual load voltage 1 3 5 10 30 50 OFF 100 300 500 Load current (mA) I/O Circuit Diagrams Output configuration Operation mode Model Timing chart NO E2F-X1R5@ Present Sensing object E2F-X1R5E1 E2F-X2E1 E2F-X5E1 E2F-X10E1 Output circuit Not present Load (between brown and black leads) Brown Operate Reset Output voltage (between black and blue leads) High Low ON Detection indicator (red) OFF +V 330 Ω Load Proximity Sensor main circuit 4.7 kΩ Black *1 Output *2 Tr Blue 0V *1. Load current: 200 mA max. *2. When a transistor is connected. DC 3-wire Sensing object NC E2F-X1R5E2 E2F-X2E2 E2F-X5E2 E2F-X10E2 Present Except the E2F-X1R5@. Not present Load (between brown and black leads) Output voltage (between black and blue leads) Detection indicator (red) Brown Operate Reset High Low ON OFF +V 100 Ω Load Proximity Sensor main circuit 4.7 kΩ Black 2.2 Ω *1 Output *2 Tr Blue 0V *1. Load current: 200 mA max. *2. When a transistor is connected. NO E2F-X1R5Y1 E2F-X2Y1 E2F-X5Y1 E2F-X10Y1 Present Sensing object Not present Operate Load Reset Operation indicator (red) OFF AC 2-wire NC E2F-X1R5Y2 E2F-X2Y2 E2F-X5Y2 E2F-X10Y2 Sensing object Brown ON Present Load Proximity Sensor main circuit Blue Not present Load Operation indicator (red) Operate Reset ON OFF 5 E2F Safety Precautions Refer to Warranty and Limitations of Liability. WARNING ● Mounting This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not tighten the nut with excessive force. Model Precautions for Correct Use Do not use this product under ambient conditions that exceed the ratings. E2F-X1R5@@ E2F-X2@@ E2F-X5@@ E2F-X10@@ Torque 0.78 N·m 2 N·m ● Maintenance and Inspection ● Design Influence of Surrounding Metal When mounting the Sensor within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these distances may cause deterioration in the performance of the Sensor. Do not use AC 2-Wire Models in water or in locations subject to water if the sensing surface or any other part of the Sensor is damaged, e.g., from contact with the sensing object. Electric shock may result. ｌ n m φd D m ｌ (Unit: mm) Influence of Surrounding Metal Model Item l d D 8 E2F-X1R5@@ E2F-X2@@ 12 0 E2F-X5@@ 0 18 30 E2F-X10@@ m n 4.5 12 8 18 20 27 40 45 Mutual Interference When installing Sensors face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. B A (Unit: mm) Mutual Interference Model E2F-X1R5@@ E2F-X2@@ E2F-X5@@ E2F-X10@@ Item A B 20 30 (20) 50 (30) 100 (50) 15 20 (12) 35 (18) 70 (35) Note: Values in parentheses apply to Sensors operating at different frequencies. Models numbers for Sensors with different frequencies are E2F-X@@@5. 6 E2F (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. DC 3-Wire Models AC 2-Wire Models E2F-X1R5E@ E2F-X1R5Y@ 30 22 15 dia. 20 13 M8 × 1 29 13 * Detection indicator (red) Two clamping nuts Two washers 4 40 32 15 dia. M8 × 1 * 3.5-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.14 mm2, Insulator diameter: 1 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2F-X2E@ 4 Operation indicator (red) Two clamping nuts * Two washers * 3.5-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.14 mm2, Insulator diameter: 1 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2F-X2Y@ 43 38 27 32 24 17 29 17 * M12 × 1 Detection indicator (red) Two clamping nuts 4 M12 × 1 * 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). * 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2F-X5E@ 4 * Operation indicator (red) Two clamping nuts E2F-X5Y@ 47 40 32 24 47 40 32 24 29 29 * * Detection indicator (red) M18 × 1 4 Operation indicator (red) M18 × 1 Two clamping nuts * 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2F-X10E@ Two clamping nuts 4 * 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2F-X10Y@ 57 50 57 50 41 41 36 36 38 38 * M30 × 1.5 * Detection indicator (red) M30 × 1.5 Two clamping nuts 5 * 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Operation indicator (red) 5 Two clamping nuts * 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Mounting Hole Dimensions Model F (mm) E2F-X1R5@@ 8.5 +0.5 dia. 0 E2F-X2@@ 12.5 +0.5 dia. 0 E2F-X5@@ 18.5 +0.5 dia. 0 E2F-X10@@ +0.5 30.5 0 dia. F 7 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron objects to any terms or conditions proposed in Buyer’s purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron’s payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in “break down” situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches D29I-E-01 10/15 Note: Specifications are subject to change. Printed on recycled paper. © 2015 Omron Electronics LLC Printed in U.S.A.