G3VM-61LR-TR05

G3VM-61LR MOS FET Relays World’s Smallest * SSOP Package MOS FET Relays (COFF (typical): 20 pF, RON (typical): 1 Ω) with Low Output Capacitance and ON Resistance (C × R = 20 pF • Ω) in a 60-V Load Voltage Model. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. Note: The actual product is marked differently from the image shown here. * As of March 2011 Survey by OMRON RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment 416 • Test & Measurement equipment Model name OMRON mark • Communication equipment LOT.No. 612 • Data loggers Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals Model Minimum package quantity Number per tape and reel G3VM-61LR SSOP4 1a (SPST-NO) Surface-mounting Terminals 60 V G3VM-61LR (TR05) G3VM-61LR (TR) 500 1,500 Note: Ask your OMRON representative for orders under 1,500 pcs or 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 −0.5 5 125 60 400 −4.0 125 Unit mA mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 2 5 Maximum resistance with output ON RON 1.0 1.5 Current leakage when the relay is open ILEAK 1 Capacity between terminals COFF 20 30 Capacity between I/O terminals CI-O 0.3 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.3 1 Turn-OFF time tOFF 0.2 1 1 Unit V µA pF mA Ω µA pF pF MΩ ms ms Measurement conditions Note: 2. Turn-ON and Turn-OFF Times IF = 10 mA IF 1 VR = 5 V 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 100 mA, RON < 1.5 Ω IF = 5 mA, IO = 400 mA VOFF = 60 V, Ta = 25 °C V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) G3VM-61LR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 10 −20 - 48 20 400 70 V mA mA °C ■ Engineering Data IO - Ta 100 80 60 40 20 400 300 200 20 40 60 80 100 Continuous load current vs. On-state voltage 0 20 40 200 100 0 -100 1.8 1.6 1 0.6 120 0.8 1 1.2 IO = 400 mA IF = 5 mA 1.0 0.8 0.4 -400 0.2 0 -20 100 200 300 400 500 0 20 On-state voltage VON (mV) Turn ON, Turn OFF time vs. LED forward current 100 tON 10 60 80 3.5 30 50 100 1.8 2.5 2.0 1.5 1.0 0.5 0.0 -20 100 IO = 100 mA 3.0 0 20 Ambient temperature Ta (°C) Turn ON, Turn OFF time tON, tOFF (µs) tOFF 1.6 4.0 40 60 80 100 Ambient temperature Ta (°C) Current leakage vs. Load voltage tON, tOFF - Ta 1000 1 40 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - IF Ta = 25 °C VDD = 20 V, RL = 200 Ω 1.4 LED forward voltage VF (V) IFT - Ta 1.2 -300 5 100 1.4 0.6 3 80 2.0 -200 1 60 Trigger LED forward current IFT (mA) 300 10 3 On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature On-state resistance RON (Ω) Ta = 25 °C IF = 5 mA 0 5 RON - Ta 500 -500 -500 -400 -300 -200 -100 10 Ambient temperature Ta (°C) IO - VON 400 30 0.1 0 -20 120 Ta = 25 °C 50 0.3 ILEAK - VOFF 1000 Current leakage ILEAK (pA) 0 100 0.5 Ambient temperature Ta (°C) Continuous load current IO (mA) IF - VF 500 100 0 -20 Turn ON, Turn OFF time tON, tOFF (µs) LED forward current vs. LED forward voltage LED forward current IF (mA) Continuous load current IO (mA) Continuous load current vs. Ambient temperature IF - Ta LED forward current IF (mA) LED forward current vs. Ambient temperature VDD = 20 V RL = 200 Ω, IF = 5 mA 500 300 tON 200 100 Ta = 25 °C 80 60 40 tOFF 100 20 50 -20 0 LED forward current IF (mA) 20 40 60 80 100 Ambient temperature Ta (°C) 0 10 20 30 40 50 60 Load voltage (V) Output terminal capacitance vs. Load voltage Output terminal capacitance COFF/COFF (0 V) COFF - VOFF 1.2 Ta = 25 °C 1.0 0.8 0.6 0.4 0.2 0 0 10 20 30 40 Load voltage (V) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions SSOP4 type ■ Appearance SSOP (Shrink Small Outline Package) SSOP4 416 Model name OMRON mark 612 LOT.No. Note: The actual product is marked differently from the image shown here. ■ Dimensions 416 (Unit: mm) Surface-mounting Terminals 612 Weight: 0.03 g 4.2 Actual Mounting Pad Dimensions (Recommended Value, TOP VIEW) 1.9 1.4 dia. 3.65 0.15 (0.3) 1.27 2.04 1.8 0.95 3.73 0.2 3.8 0.8 1.27 (0.46) Unless otherwise specified, the dimensional tolerance is ± 0.1 mm. Note: The actual product is marked differently from the image shown here. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K210-E1-01 0412(0412)(O)