G3VM402C

MOS FET Relays G3VM-402C/F New Expanded Range of Analogswitching MOS FET Relays with 400-V Load Voltage with 2 Output Channels. • A 2-channel Relay now included in the 400-V load voltage series. • Continuous load current of 120 mA. • Dielectric strength of 2,500 Vrms between I/O. ■ Application Examples Approval pending Note: • Measurement devices The actual product is marked differently from the image shown here. • Security systems • Amusement machines ■ List of Models Contact form DPST-NO Terminals PCB terminals Load voltage (peak value) 400 VAC Surface-mounting terminals Model G3VM-402C Number per stick Number per tape 50 --- --- 1,500 G3VM-402F G3VM-402F(TR) ■ Dimensions Note: All units are in millimeters unless otherwise indicated. ■ Terminal Arrangement/Internal Connections (Top View) ■ PCB Dimensions (Bottom View) 46 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-402C/F G3VM-402C/F ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 ms pulses, 100 pps LED forward current reduction rate D IF/°C -0.5 mA/°C Ta ³ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 400 V Continuous load current IO 120 mA ON current reduction rate D ION/°C -1.2 mA/°C Connection temperature Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 2,500 Vrms AC for 1 min Operating temperature Ta -40 to +85 °C With no icing or condensation Storage temperature Tstg -55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 °C 10 s Output 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ³ 25°C ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 mA VR = 5 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 1 3 mA IO = 120 mA Maximum resistance with output ON RON --- 18 35 W IF = 5 mA, IO = 120 mA Current leakage when the relay is open ILEAK --- --- 1.0 mA VOFF = 400 V Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MW VI-O = 500 VDC, RoH £ 60% Output Turn-ON time tON --- --- 1.0 ms Turn-OFF time tOFF --- --- 1.0 ms 2. Turn-ON and Turn-OFF Times IF 1 8 2 7 RL VDD VOUT IF IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Output dielectric strength VDD --- --- Operating LED forward current IF 5 Continuous load current IO --- Operating temperature Ta - 20 --- Maximum Unit 320 V 7.5 25 mA --- 100 mA 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to page 6 for precautions common to all G3VM models. Load current (mA) G3VM-402C(F) 140 120 100 80 60 40 20 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 47