50A02SS-TL-E

Ordering number : EN7491A 50A02SS Bipolar Transistor http://onsemi.com –50V, –0.4A, Low VCE(sat) PNP Single SSFP Applications • Low-frequency Amplifier, high-speed switching small motor drive, muting circuit Features • • • • Large current capacity Low collector-to-emitter saturation voltage (resistance) : RCE(sat) typ=210mΩ[IC=0.5A, IB=50mA] Ultrasmall package facilitates miniaturization in end products Small ON-resistance (Ron) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage VEBO IC ICP Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg --50 V --50 V --5 --400 V mA --800 mA 200 mW Mounted on a glass epoxy board (20×30×1.6mm) 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7029A-002 • Package : SSFP • JEITA, JEDEC : SC-81 • Minimum Packing Quantity : 8,000 pcs./reel 50A02SS-TL-E 1.4 0.1 3 Packing Type: TL Marking 0.8 0 to 0.02 2 0.45 0.2 TL Electrical Connection 0.6 0.07 0.07 XN LOT No. 1 LOT No. 0.3 1.4 0.3 0.25 1 2 3 1 : Base 2 : Emitter 3 : Collector 3 1 SSFP 2 Semiconductor Components Industries, LLC, 2013 August, 2013 71812 TKIM/O3103 TSIM TA-100149 No.7491-1/7 50A02SS Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Conditions Ratings min typ max Unit ICBO IEBO hFE VCB= --40V, IE=0A VEB= --4V, IC=0A VCE= --2V, IC= --10mA fT Cob VCE= --10V, IC= --50mA VCB= --10V, f=1MHz 690 VCE(sat) VBE(sat) IC= --100mA, IB= --10mA IC= --100mA, IB= --10mA --60 --120 --0.9 --1.2 V(BR)CBO V(BR)CEO IC= --10μA, IE=0A IC= --1mA, RBE=∞ --50 --50 V V(BR)EBO ton IE= --10μA, IC=0A --5 V tstg tf See specified Test Circuit. 200 --100 nA --100 nA 500 MHz 3.8 pF mV V V 30 ns 170 ns 30 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% OUTPUT IB2 INPUT VR 50Ω RB RL + + 220μF 470μF VBE=5V VCC= --25V IC=20IB1= --20IB2= --200mA Ordering Information Device 50A02SS-TL-E Package Shipping memo SSFP 8,000pcs./reel Pb Free No.7491-2/7 50A02SS IC -- VCE VCE= --2V A A --10m --5mA --300 --250 --2mA --200 --1mA --150 --500μA --100 --500 --400 --300 Ta=75 °C 25°C --25°C --350 --15m A Collector Current, IC -- mA --400 IC -- VBE --600 --50m --450 --40 m A A A mA 0m -25m --20 --3 - Collector Current, IC -- mA --500 --200 --200μA --100 --50 0 0 IB=0 0 --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 Collector-to-Emitter Voltage, VCE -- mV 0 VCE= --2V DC Current Gain, hFE 3 100 7 5 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 7 5 75 = Ta C 25° 3 2 3 5 C 5° 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA IC / IB=20 5 7 IT05410 VCE(sat) -- IC IC / IB=50 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 °C --2 2 3 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --1.2 IT05119 2 --10 --1.0 5 7--1000 IT05120 VCE(sat) -- IC --1000 --1.0 --100 2 3 --1.0 --0.8 IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Ta=75°C 25°C --25°C --0.6 VCE(sat) -- IC 3 7 5 --0.4 Base-to-Emitter Voltage, VBE -- V hFE -- IC 1000 --0.2 IT05118 --1000 3 2 --100 7 C 75° Ta= 5 3 °C 25°C 2 --10 7 --1.0 5 --2 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 5 3 2 --100 75°C Ta= °C --25 7 5 3 25°C 2 --10 --1.0 5 7--1000 IT05123 2 3 5 7 --10 2 3 5 7 --100 2 3 Cob -- VCB 10 Ta= --25°C 7 75°C 25°C 5 3 2 --1.0 2 3 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA f=1MHz Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V IC / IB=20 --1.0 2 3 5 7--1000 IT05125 5 7--1000 IT05124 Collector Current, IC -- mA VBE(sat) -- IC 2 7 7 5 3 2 1.0 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 --100 IT05122 No.7491-3/7 50A02SS f T -- IC 7 Ron -- IB 1kΩ f=1MHz 5 3 2 OUT IN 1kΩ 3 2 IB 10 7 5 3 2 1.0 7 5 3 2 100 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 IT05121 Collector Current, IC -- mA PC -- Ta 250 Collector Dissipation, PC -- mW 100 7 5 VCE= --10V ON Resistance, Ron -- Ω Gain-Bandwidth Product, f T -- MHz 1000 0.1 --0.1 2 3 5 7 --1.0 2 Base Current, IB -- mA 3 5 7 --10 IT06093 M 200 ou nt 150 ed on ag las se po xy bo ar 100 d( 20 ✕3 0 ✕1 50 .6m m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05045 No.7491-4/7 50A02SS Embossed Taping Specification 50A02SS-TL-E No.7491-5/7 50A02SS Outline Drawing 50A02SS-TL-E Land Pattern Example Mass (g) Unit 0.0018 mm * For reference Unit: mm 1.2 0.5 0.5 0.45 0.45 0.45 0.45 No.7491-6/7 50A02SS ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7491-7/7