Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSQ500L
Compact, Green Mode, Fairchild Power Switch (FPS™)
Features
Description
The FSQ500L is specially designed for a replacement of
linear power supplies with low cost. This device
combines current-mode Pulse Width Modulator (PWM)
with a senseFET. The integrated PWM controller
features include: a fixed oscillator, Under Voltage
Lockout (UVLO) protection, Overload Protection (OLP),
Leading-Edge Blanking (LEB), an optimized gate turnon/turn-off driver, Thermal Shutdown (TSD) protection
with
hysteresis,
and
temperature-compensated
precision-current sources for loop compensation. When
compared to a linear power supply, the FSQ500L device
reduces total size and weight, while increasing
efficiency, productivity, and system reliability. This
device provides a basic platform for cost-effective
flyback converters.
Single Chip 700V SenseFET Power Switch
Precision Fixed Operating Frequency: 130kHz
No-load consumption 250mW at 265VAC with
Burst Mode and Down to 60mW with External Bias
Internal Startup Switch
Auto-Restart Mode
Soft-Start Time Tuned by External Capacitor
Under-Voltage Lockout (UVLO) with Hysteresis
Pulse-by-Pulse Current Limit
Overload Protection (OLP) and Internal Thermal
Shutdown Function (TSD) with Hysteresis
No Need for Auxiliary Bias Winding
Applications
Cost-Effective Linear Power Supplies Replacement
Charger and Adapter for Mobile Phone, PDA, MP3,
and Cordless Phone
Maximum Output Power(1)
230VAC ± 15%(2)
Related Resources
AN4137 — Design Guidelines for Off-line Flyback
Converters Using Fairchild Power Switch (FPS™)
AN4141 — Troubleshooting and Design Tips for
Fairchild Power Switch (FPS™) Flyback
Applications
AN-4147 — Design Guidelines for RCD Snubber of
Flyback Converters
AN-6075 — Compact Green Mode Adapter Using
FSQ500L for Low Cost
AN-4138 — Design Considerations for Battery
Charger Using Green Mode Fairchild Power Switch
(FPS™)
Evaluation Board: FEBFSQ500L
85-265VAC
Adapter(3)
Open
Frame(4)
Adapter(3)
Open
Frame(4)
2.5W
3.0W
2.0W
2.5W
Notes:
1. The junction temperature can limit the maximum
output power.
2. 230VAC or 100/115VAC with doubler.
3. Typical continuous power in a non-ventilated
enclosed adapter measured at 50°C ambient.
4. Maximum practical continuous power in an open
frame design at 50°C ambient.
Ordering Information
Part Number
Operating
Temperature Range
Package
Packing Method
FSQ500L
-40°C to +85°C
4-Lead, Small Outline Package (SOT223-4L)
Tape & Reel
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
April 2012
AC
IN
DC
OUT
D
PWM
VFB
V CC
GND
Figure 1. Typical Application Circuit
Internal Block Diagram
VCC
D
2
1
6.5V
Soft-Soft
VCC
VCC
I FB
IIDELAY
7.7VZ
OSC
(BURST MODE:IFB/2)
VFB 3
S
8R
250ns
LEB
R sense
V BURL/V BURH
(0.3V)
S
A/R
OLP
V
VOLP
SD
UVLO
Q
R
R
VREF
HV/REG
HV/REG OFF
Q
R
TSD
4
GND
Figure 2. Internal Block Diagram
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
2
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Application Circuit Diagram
GND
FSQ500L
D
VCC
VFB
Figure 3. Package / Pin Diagram
Pin Definitions
Pin #
Name
Description
D
High-voltage power senseFET drain connection. In addition, at startup, the internal high-voltage
current source supplies internal bias and charges the external capacitor connected to the VCC pin.
Once VCC reaches 6.0V, all internal blocks are activated. The internal high-voltage current source
is alive until VCC reaches 6.5V. After that, the internal high voltage current source turns on and off
irregularly to maintain VCC at 6.5V.
VCC
This pin is connected to a storage capacitor. A high-voltage regulator connected between pin 1 (D)
and this pin provides the supply voltage to the FSQ500L at startup and when switching during
normal operation. The FSQ500L eliminates the need for auxiliary bias winding and associated
external components.
3
VFB
This pin is internally connected to the non-inverting input of the PWM comparator. The collector of
an opto-coupler is typically tied to this pin. For stable operation, a capacitor should be placed
between this pin and GND. If the voltage of this pin reaches 4.5V, the overload protection triggers,
which shuts down the FPS.
4
GND
1
2
This pin is the control ground and the senseFET source.
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
3
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Pin Assignments
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
(5)
VDS
Drain Pin Voltage
VCC
Supply Voltage
VFB
Feedback Voltage Range
Max.
700
-0.3
Unit
V
10
V
VCC
V
PD
Total Power Dissipation
0.78
W
IDM
Drain Current Pulsed(6)
0.41
A
TJ
Operating Junction Temperature
-40
Internally Limited
°C
Storage Temperature
-55
+150
°C
Value
Unit
+160
°C/W
TSTG
Notes:
5. LDMOS available drain voltage is -0.3V ~ 700V.
6. Repetitive rating: pulse width is limited by maximum junction temperature.
Thermal Impedance
Symbol
Parameter
(7)
θJA
Junction-to-Ambient Thermal Resistance
Note:
7. Free-standing with no heat sink; minimum land pattern.
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
4
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Absolute Maximum Ratings
TJ = 25°C unless otherwise specified.
Symbol
Parameter
Condition
Min.
Typ. Max. Unit
SenseFET Section
BVDSS
Drain-Source Breakdown Voltage
VCC = 6.5V, VFB = 0V, ID = 150μA
IDSS
Zero-Gate-Voltage Drain Current
VCC = 6.5V, VFB = 0V, VDS = 560V
RDS(ON)
CISS
COSS
tr
tf
Drain-Source On-State Resistance
(8)
Input Capacitance
(8)
700
V
150
μA
TJ = 25°C, ID = 25mA
25
29
Ω
TJ = 100°C, ID = 25mA
35
41
Ω
VGS = 6.5V
42
pF
Output Capacitance
VDS = 40V, fS = 1MHz
25
pF
Rise Time(8)
VDS = 350V, ID = 25mA
100
ns
VDS = 350V, lD = 25mA
50
ns
(8)
Fall Time
Control Section
fS
ΔfS
IFB(Burst)
IFB(Normal)
Switching Frequency
VCC = 6.5V, VFB = 1.0V
(8)
Switching Frequency Variation
Feedback Source Current
-25°C < TJ < 125°C
±7
%
μA
VCC = 6.5V
200
225
250
μA
54
60
66
%
0
%
VCC = 6.5V, VFB = 4.0V
VCC = 6.5V, VFB = 0V
Shutdown Delay Current Enable
Voltage
±5
122
Minimum Duty Ratio
VDLY_EN
kHz
110
Maximum Duty Ratio
VSTOP
140
98
DMIN
UVLO Threshold Voltage
130
VCC = 6.5V, VFB = 0V
DMAX
VSTART
120
VFB = 0V, VCC Sweep
5.5
6.0
6.5
V
After Turn-on, VFB = 0V, VCC Sweep
4.5
5.0
5.5
V
VFB = VSD, VCC Sweep from 6V
6.0
6.5
7.0
V
0.75
0.80
0.85
V
0.70
0.75
0.80
V
30
50
80
mV
Burst-Mode Section
VBURH
VBURL
VCC = 6.5V, VFB Sweep
Burst Mode Voltage
HYS
Protection Section
ILIM
Peak Current Limit
di/dt = 150mA/µs
245
280
315
mA
VSD
Shutdown Feedback Voltage
VCC = 6.5V, VFB Sweep
4.1
4.5
4.9
V
VCC = 6.5V, VFB = 4.0V
4
5
6
μA
IDELAY
tLEB
tCLD
TDS
HYS
Shutdown Delay Current
(8)
Leading Edge Blanking Time
250
(8)
Current Limit Delay Time
ns
100
130
Thermal Shutdown Temperature(8)
140
ns
150
°C
°C
80
Total Device Section
IOP-BURST Operating Supply Current (Control
Part Only)
IOP-FB
VCC = 6.5V, VFB = 0V
360
430
500
760
880
μA
μA
VCC = 6.5V, VFB = 4V
640
Startup Charging Current
VCC = VFB = 0V, VDS = 40V
3.3
VCCREG
Supply Shunt Regulator
VDS = 40V, VFB = 0V
6.0
6.5
7.0
V
VCCREG_
Supply Shunt Regulator During
TSD(8)
5.2
5.7
6.2
V
ICH
TSD
mA
Note:
8. These parameters, although guaranteed, are not 100% tested in production.
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
5
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Electrical Characteristics
These characteristic graphs are measured at TA = 25°C.
Operating Supply Current (IOP) vs Temperature
Switching Frequency (fS) vs Temperature
490
140
470
135
fS (KHZ)
IOP (μA)
450
430
410
130
125
390
370
120
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
Temperature (℃)
50
65
80
95
110
125
110
125
Figure 5. Switching Frequency (fS)
vs. Temperature
UVLO Threshold Voltage (VSTOP) vs Temperature
UVLO Threshold Voltage (VSTART) vs Temperature
6.5
5.5
6.3
5.3
6.1
5.1
VSTOP (V)
VSTART (V)
35
Temperature (℃)
Figure 4. Operating Supply Current (IOP_Burst)
vs. Temperature
5.9
5.7
4.9
4.7
5.5
4.5
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
Temperature (℃)
20
35
50
65
80
95
Temperature (℃)
Figure 6. UVLO Threshold Voltage (VSTART)
vs. Temperature
Figure 7. UVLO Threshold Voltage (VSTOP)
vs. Temperature
Burst Mode Voltage (VBURL) vs Temperature
Burst Mode Voltage (VBURH) vs Temperature
850
800
830
780
VBURL (mV)
VBURH (mV)
20
810
790
760
740
720
770
700
750
-40
-25
-10
5
20
35
50
65
80
95
110
-40
125
Figure 8. Burst-Mode Voltage (VBURH)
vs. Temperature
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
-25
-10
5
20
35
50
65
80
95
110
125
Temperature (℃)
Temperature (℃)
Figure 9. Burst-Mode Voltage (VBURL)
vs. Temperature
www.fairchildsemi.com
6
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Typical Performance Characteristics
These characteristic graphs are measured at TA = 25°C.
Maximum Duty Ratio (DMAX) vs Temperature
Shutdown Feedback Voltage (VSD) vs Temperature
5.0
64.0
63.0
4.8
61.0
VSD (V)
DMAx (%)
62.0
60.0
59.0
58.0
4.6
4.4
4.2
57.0
4.0
56.0
-40
-25
-10
5
20
35
50
65
80
95
110
-40
125
-25
-10
5
Temperature (℃)
20
35
50
65
80
95
110
125
Temperature (℃)
Figure 11. Shutdown Feedback Voltage (VSD)
vs. Temperature
Figure 10. Maximum Duty Ratio (DMAX) vs. Temperature
Peak Current Limit (ILIM) vs Temperature
Shutdown Delay Current (IDELAY) vs Temperature
5.5
310.0
300.0
5.3
IDELAY (μA)
ILIM (mA)
290.0
280.0
270.0
5.1
4.9
260.0
4.7
250.0
240.0
4.5
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
20
35
50
65
80
95
110
125
Temperature (℃)
Temperature (℃)
Figure 13. Shutdown Delay Current (IDELAY)
vs. Temperature
Figure 12. Peak Current Limit (ILIM) vs. Temperature
Supply Shunt Regulator (VCCREG) vs Temperature
7.0
VCCRGE (V)
6.8
6.6
6.4
6.2
6.0
-40
-25
-10
5
20
35
50
65
80
95
110
125
Temperature (℃)
Figure 14. Supply Shunt Regulator (VCCREG)
vs. Temperature
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
7
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Typical Performance Characteristics (Continued)
1. Startup and VCC Regulation: At startup, an internal
high-voltage current source supplies the internal bias
and charges the external capacitor (CA) connected to
the VCC pin, as illustrated in Figure 15. An internal highvoltage regulator (HV/REG) located between the D and
VCC pins regulates the VCC to be 6.5V and supplies
operating current. Therefore, FSQ500L needs no
auxiliary bias winding.
VCC
VCC
IDELAY
VFB
VO
2
FOD817A
IFB
SenseFET
OSC
D1
CB
D2
+
VFB*
KA431
8R
Gate
driver
R
-
Transformer
OLP
VSD
Rsense
D
VCC
3
6.5V
Figure 16. Pulse Width Modulation (PWM) Circuit
2
ICH
HV/REG
3. Protection Circuits: The FSQ500L has two selfprotective functions: overload protection (OLP) and
thermal shutdown (TSD). While OLP is implemented as
auto-restart mode, there is no switching when TSD
triggers. Once the overload condition is detected,
switching is terminated, the senseFET remains off, and
HV/REG turns off. This causes VCC to fall. When VCC
falls below the under voltage lockout (UVLO) stop
voltage of 5.0V, the protection is reset and the startup
circuit charges the VCC capacitor. When VCC reaches the
start voltage of 6.0V, the FSQ500L resumes its normal
operation. If the fault condition is still not removed, the
senseFET and HV/REG remain off and VCC drops to
VSTOP again. In this manner, the auto-restart can
alternately enable and disable the switching of the
power senseFET until the fault condition is eliminated,
as shown in Figure 17.
ISTART
CA
VREF
UVLO
Figure 15. Startup Block
2. Feedback Control: FSQ500L employs current mode
control, as shown in Figure 16. An opto-coupler (such as
the FOD817A) and shunt regulator (such as the KA431)
are typically used to implement the feedback network.
Comparing the feedback voltage with the voltage across
the Rsense resistor makes it possible to control the
switching duty cycle. When the reference pin voltage of
the regulator exceeds the internal reference voltage of
2.5V, the opto-coupler LED current increases, pulling
down the feedback voltage and reducing the duty cycle.
This typically happens when the line input voltage
increases or the output load current decreases.
Because these protection circuits are fully integrated
into the IC without external components, reliability is
improved without increasing cost.
VDS
2.1 Pulse-by-Pulse Current Limit: Because current
mode control is employed, the peak current through the
senseFET is limited by the non-inverting input of PWM
comparator (VFB*), as shown in Figure 16. Assuming
that 225µA current source flows only through the
internal resistor (8R + R = 12kΩ), the cathode voltage of
diode D2 is about 2.7V. Since D1 is blocked when the
feedback voltage (VFB) exceeds 2.7V, the maximum
voltage of the cathode of D2 is clamped at this voltage,
clamping VFB*. Therefore, the peak value of the current
through the senseFET is limited.
OLP
removed
VCC
6.5V
6.0V
5.0V
2.2 Leading-Edge Blanking (LEB): At the instant the
internal senseFET is turned on, a high-current spike
occurs through the senseFET, caused by primary-side
capacitance and secondary-side rectifier reverse
recovery. Excessive voltage across the Rsense resistor
would lead to incorrect feedback operation in the current
mode PWM control. To counter this effect, the FPS
employs a leading-edge blanking (LEB) circuit. This
circuit inhibits the PWM comparator for a short time (tLEB
= 250ns) after the senseFET turns on.
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
OLP
occurs
Power
on
t
Normal
operation
Fault
situation
Normal
operation
Figure 17. Auto Restart Protection Waveforms
www.fairchildsemi.com
8
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Functional Description
VFB
Power
on
VDS
TSD
occurs
TSD
removed
VCC
6.5V
6.0V
5.7V
t
Normal
operation
Normal
operation
Fault
situation
Figure 19. Over-Temperature Protection (OTP)
4. Soft-Start: The soft-start time is tuned by an external
VCC capacitor (CA), which increases PWM comparator
non-inverting input voltage together with the senseFET
current slowly after it starts up. Before VCC reaches
VSTART, CA is charged by the current ICH-ISTART, where ICH
and ISTART are described in Figure 15. After VCC reaches
VSTART, all internal blocks are activated, so that the
current consuming inside IC becomes IOP. Therefore, CA
is charged by the current ICH-IOP, which makes the
increasing slope of VCC become sluggish. VCC is shifted
by 6.0V negatively (it is performed in soft-start block in
Figure 2), and then VCC -6.0V is an input of one of the
input terminals of the PWM comparator. The drain
current follows VCC -6.0V instead of the VFB* because of
the low-dominant feature of the PWM comparator. The
soft-start time can be made long or short by selecting
CA, as described in Figure 20. During tS/S, IDELAY is
disabled to avoid unwanted OLP. Typically, tS/S is
around 4.6ms with 27µF of CA.
Overload protection
4.5V
2.7V
VCC
tS/S
T12= CB*(4.5-2.7)/IDELAY
T1
Figure 18. Overload Protection
T2
t
3.2 Thermal Shutdown (TSD): The senseFET and the
control IC in one package makes it easy for the control
IC to detect an abnormal over temperature of the
senseFET.
When
the
temperature
exceeds
approximately 140°C, the thermal shutdown triggers.
When TSD triggers, delay current is disabled, switching
operation stops, and VCC through the internal highvoltage current source is set to 5.7V from 6.5V, as
shown in Figure 19. Since TSD signal prohibits the
senseFET from switching, there is no switching until the
junction temperature decreases sufficiently. If the
junction temperature is lower than 60°C typically, TSD
signal is removed and VCC is set to 6.5V again. While
VCC increases from 5.7V to 6.5V, the soft-start function
makes the senseFET turn on and off with no voltage
and/or current stress.
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
6.5V
VCCREG
6V
VSTART
5V
VSTOP
t1
t1=CA×6V/(ICH-ISTART)
t2
t
tS/S=CA×0.5V/(ICH-IOP)
Figure 20. Soft-Start Function
The peak value of the drain current of the power
switching device is progressively increased to establish
the correct working conditions for transformers,
inductors, and capacitors. The voltage on the output
capacitors is progressively increased with the intention
of smoothly establishing the required output voltage. It
also helps to prevent transformer saturation and reduce
stress on the secondary diode during startup.
www.fairchildsemi.com
9
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
3.1 Overload Protection (OLP): Overload is defined as
the load current exceeding its normal level due to an
unexpected abnormal event. In this situation, the
protection circuit should trigger to protect the SMPS.
However, even when the SMPS is in the normal
operation, the overload protection circuit can be
triggered during the load transition. To avoid this
undesired operation, the overload protection circuit is
designed to trigger after a specified time to determine
whether the situation is transient or a true overload.
Because of the pulse-by-pulse current limit capability,
the maximum peak current through the senseFET is
limited and, therefore, the maximum input power is
restricted with a given input voltage. If the output
consumes more than this maximum power, the output
voltage (VO) decreases below the set voltage. This
reduces the current through the opto-coupler LED,
which also reduces the opto-coupler transistor current,
thus increasing the feedback voltage (VFB). If VFB
exceeds 2.7V, D1 is blocked and the 5µA current source
starts to charge CB slowly up to VCC. In this condition,
VFB continues increasing until it reaches 4.5V, when the
switching operation is terminated, as shown in Figure
18. The delay time for shutdown is the time required to
charge CB from 2.7V to 4.5V with 5µA. In general, a 10
~ 50ms delay time is typical for most applications. This
protection is implemented in auto restart mode.
Voset
VFB
0.80V
0.75V
IDS
VDS
time
t1
Switching
disabled
t2
t3
Switching
disabled
t4
Figure 21. Burst-Mode Operation
© 2008 Fairchild Semiconductor Corporation
FSQ500L • Rev. 1.0.3
www.fairchildsemi.com
10
FSQ500L — Compact, Green Mode, Fairchild Power Switch (FPS™)
Vo
5. Burst Operation: To minimize power dissipation in
standby mode, the FPS enters burst-mode operation.
During the burst mode operation, IFB(Burst) decreases half
of IFB(Normal). As the load decreases, the feedback
voltage decreases. As shown in Figure 21, the device
automatically enters burst mode when the feedback
voltage drops below VBURL (750mV). At this point,
switching stops and the output voltages start to drop at a
rate dependent on standby current load. This causes the
feedback voltage to rise. Once it passes VBURH (800mV),
switching resumes. The feedback voltage then falls and
the process repeats. Burst mode alternately enables
and disables switching of the power senseFET, reducing
switching loss in standby mode.
6.70
6.20
0.10
B
C B
3.10
2.90
3.25
4
1.90
A
3.70
3.30
1
6.10
1.90
3
0.84
0.60
2.30
2.30
0.95
4.60
0.10
C B
LAND PATTERN RECOMMENDATION
SEE DETAIL A
1.80 MAX
C
0.08
C
0.10
0.00
10°
5°
GAGE
PLANE
R0.15±0.05
R0.15±0.05
10° TYP
0°
0.25
SEATING
PLANE
10°
5°
0.60 MIN
1.70
DETAIL A
SCALE: 2:1
0.35
0.20
7.30
6.70
NOTES: UNLESS OTHERWISE SPECIFIED
A) DRAWING BASED ON JEDEC REGISTRATION
TO-261C, VARIATION AA.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH. MOLD FLASH OR BURRS
DOES NOT EXCEED 0.10MM.
D) DIMENSIONING AND TOLERANCING PER
ASME Y14.5M-2009.
E) LANDPATTERN NAME: SOT230P700X180-4BN
F) DRAWING FILENAME: MKT-MA04AREV3
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com