MPS8598G

(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* *Preferred Devices Amplifier Transistors Voltage and Current are Negative for PNP Transistors http://onsemi.com Features • Pb−Free Packages are Available* MAXIMUM RATINGS Rating Collector −Emitter Voltage MPS8098, MPS8598 MPS8099, MPS8599 Collector −Base Voltage MPS8098, MPS8598 MPS8099, MPS8599 Emitter −Base Voltage Collector Current − Continuous Total Device Dissipation @ TA = 25°C Derate above 25°C Total Device Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCEO 60 80 VCBO 60 80 VEBO IC PD PD TJ, Tstg 4.0 500 625 5.0 1.5 12 −55 to +150 Vdc mAdc mW mW/°C W mW/°C °C Vdc Value Unit Vdc NPN COLLECTOR 3 2 BASE 1 EMITTER STYLE 1 MPS8098, MPS8099 2 BASE PNP COLLECTOR 3 1 EMITTER STYLE 1 MPS8598, MPS8599 1 2 3 TO−92 CASE 29−11 STYLE 1 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient (Note 1) Thermal Resistance, Junction−to−Case Symbol RqJA RqJC Max 200 83.3 Unit °C/W °C/W MPS 8x9y AYWW G G MARKING DIAGRAM Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. RqJA is measured with the device soldered into a typical printed circuit board. MPS8x9y = Device Code x = 0 or 5 y = 8 or 9 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 Preferred devices are recommended choices for future use and best overall value. 1 January, 2006 − Rev. 5 Publication Order Number: MPS8098/D (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 2) (IC = 10 mAdc, IB = 0) Collector −Base Breakdown Voltage (IC = 100 mAdc, IE = 0) Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Collector Cutoff Current (VCE = 60 Vdc, IB = 0) Collector Cutoff Current (VCB = 60 Vdc, IE = 0) (VCB = 80 Vdc, IE = 0) Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) (VEB = 4.0 Vdc, IC = 0) ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 1.0 mAdc, VCE = 5.0 Vdc) (IC = 10 mAdc, VCE = 5.0 Vdc) (IC = 100 mAdc, VCE = 5.0 Vdc) Collector −Emitter Saturation Voltage (IC = 100 mAdc, IB = 5.0 mAdc) (IC = 100 mAdc, IB = 10 mAdc) Base−Emitter On Voltage (IC = 1.0 mAdc, VCE = 5.0 Vdc) (IC = 10 mAdc, VCE = 5.0 Vdc) SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) 2. Pulse Test: Pulse Width v 300 ms, Duty Cycle = 2.0%. 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 1.0 2.0 5.0 10 20 50 100 200 t, TIME (ms) 500 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k 100 k MPS8098, MPS8099 MPS8598, MPS8599 Cibo MPS8098, MPS8099 MPS8598, MPS8599 − − 25 30 fT Cobo − − 6.0 8.0 pF 150 − MHz pF MPS8098, MPS8598 MPS8099, MPS8599 hFE 100 100 75 VCE(sat) − − VBE(on) 0.5 0.6 0.7 0.8 0.4 0.3 Vdc 300 − − Vdc − MPS8098, MPS8598 MPS8099, MPS8599 IEBO MPS8098, MPS8099 MPS8598, MPS8599 − − 0.1 0.1 V(BR)CEO MPS8098, MPS8598 MPS8099, MPS8599 V(BR)CBO MPS8098, MPS8598 MPS8099, MPS8599 V(BR)EBO MPS8098, MPS8099 MPS8598, MPS8599 ICES ICBO − − 0.1 0.1 mAdc 6.0 5.0 − − − 0.1 mAdc mAdc 60 80 − − Vdc 60 80 − − Vdc Vdc Symbol Min Max Unit D = 0.5 0.2 0.1 0.05 SINGLE PULSE 0.02 0.01 P(pk) t1 SINGLE PULSE t2 DUTY CYCLE, D = t1/t2 ZqJC(t) = r(t) • RqJC TJ(pk) − TC = P(pk) ZqJC(t) ZqJA(t) = r(t) • RqJA TJ(pk) − TA = P(pk) ZqJA(t) D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN469) r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE Figure 1. MPS8098, MPS8099, MPS8598 and MPS8599 Thermal Response http://onsemi.com 2 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* TURN−ON TIME −1.0 V VCC +40 V RL OUTPUT Vin 0 tr = 3.0 ns 5.0 mF 100 5.0 ms tr = 3.0 ns *Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities RB * CS t 6.0 pF Vin 5.0 mF 100 RB * CS t 6.0 pF TURN−OFF TIME +VBB VCC +40 V 100 RL OUTPUT 5.0 ms +10 V 100 Figure 2. Switching Time Test Circuits NPN f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) 300 TJ = 25°C 200 5.0 V VCE = 1.0 V 100 70 50 30 f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) 300 TJ = 25°C 200 PNP −5.0 V VCE = −1.0 V 100 70 50 30 −1.0 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 −2.0 −3.0 −5.0 −7.0 −10 −20 −30 −50 −70 −100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 3. MPS8098/99 Current−Gain − Bandwidth Product Figure 4. MPS8598/99 Current−Gain − Bandwidth Product 40 TJ = 25°C 20 Cibo 10 8.0 6.0 4.0 2.0 40 TTJ==225°C 5°C J C, CAPACITANCE (pF) C, CAPACITANCE (pF) 20 Cibo 10 8.0 6.0 Cobo 4.0 2.0 −0.1 −0.2 Cobo 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 5. MPS8098/99 Capacitance http://onsemi.com 3 Figure 6. MPS8598/99 Capacitance (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* NPN 1.0 k 700 500 300 t, TIME (ns) 200 100 70 50 30 20 td @ VBE(off) = 0.5 V 10 10 20 30 50 70 100 tr 200 VCC = 40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 1.0 k 700 500 300 t, TIME (ns) 200 100 70 50 30 20 10 td @ VBE(off) = −0.5 V −10 −20 −30 −50 −70 −100 −200 tf PNP VCC = −40 V IC/IB = 10 IB1 = IB2 TJ = 25°C ts ts tf tr IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. MPS8098/99 Switching Times Figure 8. MPS8598/99 Switching Times I C , COLLECTOR CURRENT (mA) 300 200 100 70 50 30 20 10 1.0 2.0 I C , COLLECTOR CURRENT (mA) 1.0 k 700 500 −1.0 k −700 −500 −300 −200 −100 −70 −50 −30 −20 −10 −1.0 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT DUTY CYCLE ≤ 10% 3.0 5.0 7.0 10 MPS8098 MPS8099 20 30 50 70 100 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT MPS8598 DUTY CYCLE ≤ 10% MPS8599 −2.0 −3.0 −5.0 −7.0 −10 −20 −30 −50 −70 −100 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 9. MPS8098/99 Active−Region Safe Operating Area Figure 10. MPS8598/99 Active−Region Safe Operating Area 400 TJ = 125°C h FE , DC CURRENT GAIN 200 300 TJ = 125°C h FE , DC CURRENT GAIN 25°C −55°C 200 25°C 100 70 50 −55°C VCE = −5.0 V 100 80 60 40 VCE = 5.0 V 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 20 30 50 100 200 30 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 11. MPS8098/99 DC Current Gain Figure 12. MPS8598/99 DC Current Gain http://onsemi.com 4 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* NPN 1.0 TJ = 25°C VBE(sat) @ IC/IB = 10 VBE @ VCE = 5.0 V 1.0 TJ = 25°C VBE(sat) @ IC/IB = 10 VBE @ VCE = 5.0 V PNP 0.8 V, VOLTAGE (VOLTS) 0.8 V, VOLTAGE (VOLTS) 0.6 0.6 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 13. MPS8098/99 “ON” Voltages Figure 14. MPS8598/99 “ON” Voltages VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) 2.0 IC = 20 mA IC = 50 mA IC = 100 mA VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS TJ = 25°C IC = 200 mA 2.0 IC = 10 mA IC = 20 mA IC = 50 mA IC = 100 mA IC = 200 mA 1.6 1.6 1.2 1.2 0.8 0.4 0.8 0.4 TJ = 25°C 0 0.05 0.1 0.02 IC = 10 mA 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 0 0.02 0.2 0.5 1.0 2.0 5.0 10 20 IB, BASE CURRENT (mA) IB, BASE CURRENT (mA) Figure 15. MPS8098/99 Collector Saturation Region Figure 16. MPS8598/99 Collector Saturation Region R qVB , TEMPERATURE COEFFICIENT (mV/° C) −1.4 −1.8 RqVB FOR VBE −2.2 −55°C TO 125°C R qVB , TEMPERATURE COEFFICIENT (mV/° C) −1.0 −1.0 −1.4 −1.8 −2.2 RqVB FOR VBE −55°C TO 125°C −2.6 −3.0 −2.6 −3.0 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 17. MPS8098/99 Base−Emitter Temperature Coefficient Figure 18. MPS8598/99 Base−Emitter Temperature Coefficient http://onsemi.com 5 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* ORDERING INFORMATION Device MPS8098 MPS8098G MPS8098RLRA MPS8098RLRAG MPS8099 MPS8099G MPS8099RLRA MPS8099RLRAG MPS8099RLRM MPS8099RLRMG MPS8099RLRP MPS8099RLRPG MPS8598 MPS8598G MPS8598RLRA MPS8598RLRAG MPS8599 MPS8599G MPS8599RLRA MPS8599RLRAG MPS8599RLRM MPS8599RLRMG Package TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) TO−92 TO−92 (Pb−Free) Shipping † 5,000 Units / Box 5,000 Units / Box 2,000 / Tape & Reel 2,000 / Tape & Reel 5,000 Units / Box 5,000 Units / Box 2,000 / Tape & Reel 2,000 / Tape & Reel 2,000 / Ammo Pack 2,000 / Ammo Pack 2,000 / Ammo Pack 2,000 / Ammo Pack 5,000 Units / Box 5,000 Units / Box 2,000 / Tape & Reel 2,000 / Tape & Reel 5,000 Units / Box 5,000 Units / Box 2,000 / Tape & Reel 2,000 / Tape & Reel 2,000 / Ammo Pack 2,000 / Ammo Pack †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. http://onsemi.com 6 (NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599* PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A R P L SEATING PLANE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− K XX G H V 1 D J C SECTION X−X N N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan : ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 7 MPS8098/D