MPSW92
One Watt High Voltage
Transistor
PNP Silicon
http://onsemi.com
Features
• Pb−Free Packages are Available*
COLLECTOR
3
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector −Emitter Voltage
VCEO
−300
Vdc
Collector −Base Voltage
VCBO
−300
Vdc
Emitter −Base Voltage
VEBO
−5.0
Vdc
Collector Current − Continuous
IC
−500
mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
1.0
8.0
W
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
2.5
20
W
mW/°C
TJ, Tstg
−55 to +150
°C
Operating and Storage Junction
Temperature Range
1
EMITTER
12
THERMAL CHARACTERISTICS
Characteristic
2
BASE
Symbol
Max
Unit
Thermal Resistance,
Junction−to−Ambient
RqJA
125
°C/W
Thermal Resistance, Junction to Case
RqJC
50
°C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1
3
STRAIGHT LEAD
BULK PACK
2
3
BENT LEAD
TAPE & REEL
AMMO PACK
TO−92 1 WATT
(TO−226)
CASE 29−10
STYLE 1
MARKING DIAGRAM
MPS
W92
YWW G
G
MPSW45x = Device Code
x = 45A Devices
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2010
August, 2010 − Rev. 5
1
Publication Order Number:
MPSW92/D
MPSW92
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
Collector −Emitter Breakdown Voltage (Note 1)
(IC = −1.0 mAdc, IB = 0)
V(BR)CEO
−300
−
Vdc
Collector−Base Breakdown Voltage
(IC = −100 mAdc, IE = 0)
V(BR)CBO
−300
−
Vdc
Emitter−Base Breakdown Voltage
(IE = −100 mAdc, IC = 0)
V(BR)EBO
−5.0
−
Vdc
Collector Cutoff Current
(VCB = −200 Vdc, IE = 0)
ICBO
−
−0.25
mAdc
Emitter Cutoff Current
(VEB = −3.0 Vdc, IC = 0)
IEBO
−
−0.1
mAdc
25
40
25
−
−
−
OFF CHARACTERISTICS
ON CHARACTERISTICS (Note 1)
DC Current Gain
(IC = −1.0 mAdc, VCE = −10 Vdc)
(IC = −10 mAdc, VCE = −10 Vdc)
(IC = −30 mAdc, VCE = −10 Vdc)
hFE
Collector−Emitter Saturation Voltage
(IC = −20 mAdc, IB = −2.0 mAdc)
VCE(sat)
−
−0.5
Vdc
Base−Emitter Saturation Voltage
(IC = −20 mAdc, IB = −2.0 mAdc)
VBE(sat)
−
−0.9
Vdc
fT
50
−
MHz
Ccb
−
6.0
pF
−
SMALL−SIGNAL CHARACTERISTICS
Current−Gain − Bandwidth Product
(IC = −10 mAdc, VCE = −20 Vdc, f = 20 MHz)
Collector−Base Capacitance
(VCB = −20 Vdc, IE = 0, f = 1.0 MHz)
1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
ORDERING INFORMATION
Package
Shipping†
TO−92
5000 Units / Box
MPSW92G
TO−92
(Pb−Free)
5000 Units / Box
MPSW92RLREG
TO−92
(Pb−Free)
2000 / Tape & Reel
Device
MPSW92
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
MPSW92
300
hFE , DC CURRENT GAIN
VCE = 10 Vdc
TJ = +125°C
250
200
25°C
150
-55°C
100
50
0
0.1
1.0
10
100
IC, COLLECTOR CURRENT (mA)
Figure 1. DC Current Gain
f,
T CURRENT-GAIN — BANDWIDTH (MHz)
100
C, CAPACITANCE (pF)
Cib @ 1MHz
10
Ccb @ 1MHz
1.0
0.1
0.1
1.0
10
100
VR, REVERSE VOLTAGE (VOLTS)
150
130
110
90
70
50
TJ = 25°C
VCE = 20 Vdc
F = 20 MHz
30
10
1000
1
Figure 2. Capacitance
3
5
11
13
15
7
9
IC, COLLECTOR CURRENT (mA)
17
19
21
Figure 3. Current−Gain − Bandwidth
1.4
V, VOLTAGE (VOLTS)
1.2
VCE(sat) @ 25°C, IC/IB = 10
VCE(sat) @ 125°C, IC/IB = 10
VCE(sat) @ -55°C, IC/IB = 10
VBE(sat) @ 25°C, IC/IB = 10
1.0
0.8
VBE(sat) @ 125°C, IC/IB = 10
VBE(sat) @ -55°C, IC/IB = 10
VBE(on) @ 25°C, VCE = 10 V
VBE(on) @ 125°C, VCE = 10 V
VBE(on) @ -55°C, VCE = 10 V
0.6
0.4
0.2
0.0
0.1
1.0
10
IC, COLLECTOR CURRENT (mA)
100
Figure 4. ”ON” Voltages
http://onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−92 (TO−226) 1 WATT
CASE 29−10
ISSUE D
SCALE 1:1
12
3
STRAIGHT LEAD
1
DATE 05 MAR 2021
2
3
BENT LEAD
STYLES AND MARKING ON PAGE 3
DOCUMENT NUMBER:
DESCRIPTION:
98AON52857E
TO−92 (TO−226) 1 WATT
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 3
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−92 (TO−226) 1 WATT
CASE 29−10
ISSUE D
DATE 05 MAR 2021
STYLES AND MARKING ON PAGE 3
DOCUMENT NUMBER:
DESCRIPTION:
98AON52857E
TO−92 (TO−226) 1 WATT
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 2 OF 3
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
TO−92 (TO−226) 1 WATT
CASE 29−10
ISSUE D
DATE 05 MAR 2021
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
STYLE 2:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
STYLE 3:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 4:
PIN 1. CATHODE
2. CATHODE
3. ANODE
STYLE 5:
PIN 1. DRAIN
2. SOURCE
3. GATE
STYLE 6:
PIN 1. GATE
2. SOURCE & SUBSTRATE
3. DRAIN
STYLE 7:
PIN 1. SOURCE
2. DRAIN
3. GATE
STYLE 8:
PIN 1. DRAIN
2. GATE
3. SOURCE & SUBSTRATE
STYLE 9:
PIN 1. BASE 1
2. EMITTER
3. BASE 2
STYLE 10:
PIN 1. CATHODE
2. GATE
3. ANODE
STYLE 11:
PIN 1. ANODE
2. CATHODE & ANODE
3. CATHODE
STYLE 12:
PIN 1. MAIN TERMINAL 1
2. GATE
3. MAIN TERMINAL 2
STYLE 13:
PIN 1. ANODE 1
2. GATE
3. CATHODE 2
STYLE 14:
PIN 1. EMITTER
2. COLLECTOR
3. BASE
STYLE 15:
PIN 1. ANODE 1
2. CATHODE
3. ANODE 2
STYLE 16:
PIN 1. ANODE
2. GATE
3. CATHODE
STYLE 17:
PIN 1. COLLECTOR
2. BASE
3. EMITTER
STYLE 18:
PIN 1. ANODE
2. CATHODE
3. NOT CONNECTED
STYLE 19:
PIN 1. GATE
2. ANODE
3. CATHODE
STYLE 20:
PIN 1. NOT CONNECTED
2. CATHODE
3. ANODE
STYLE 21:
PIN 1. COLLECTOR
2. EMITTER
3. BASE
STYLE 22:
PIN 1. SOURCE
2. GATE
3. DRAIN
STYLE 23:
PIN 1. GATE
2. SOURCE
3. DRAIN
STYLE 24:
PIN 1. EMITTER
2. COLLECTOR/ANODE
3. CATHODE
STYLE 25:
PIN 1. MT 1
2. GATE
3. MT 2
STYLE 26:
PIN 1.
2.
3.
STYLE 27:
PIN 1. MT
2. SUBSTRATE
3. MT
STYLE 28:
PIN 1. CATHODE
2. ANODE
3. GATE
STYLE 29:
PIN 1. NOT CONNECTED
2. ANODE
3. CATHODE
STYLE 30:
PIN 1. DRAIN
2. GATE
3. SOURCE
STYLE 32:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
STYLE 33:
PIN 1. RETURN
2. INPUT
3. OUTPUT
STYLE 34:
PIN 1. INPUT
2. GROUND
3. LOGIC
STYLE 35:
PIN 1. GATE
2. COLLECTOR
3. EMITTER
VCC
GROUND 2
OUTPUT
STYLE 31:
PIN 1. GATE
2. DRAIN
3. SOURCE
GENERIC
MARKING DIAGRAM*
XXXXX
XXXXX
ALYWG
G
XXXX
A
L
Y
W
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON52857E
TO−92 (TO−226) 1 WATT
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 3 OF 3
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative