Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
NC7SVL08
TinyLogic® Low-ICCT Two-Input AND Gate
Features
Description
The NC7SVL08 is a single two-input AND gate with a
low-ICCT input design from Fairchild’s Ultra-Low Power
®
(ULP-A) series of TinyLogic . The NC7SVL08 features
very low quiescent current, even when the input voltage
is lower than the VCC supply. This feature services
mobile handset applications very well, allowing for direct
interface with baseband processor general-purpose
I/Os. Since mobile devices rely on a battery supply, the
NC7SVL08 facilitates lower power consumption in
mixed-voltage rail environments.
0.9V to 3.6V VCC Supply Operation
3.6V Over-Voltage Tolerant I/Os at VCC from
0.9V to 3.6V
Power-Off High-Impedance Inputs and Outputs
Ultra-Small MicroPak™ Packages
Proprietary Quiet Series™ Noise / EMI Reduction
Circuitry
Ultra-Low Dynamic Power
This product is designed on an advanced CMOS
technology for a wide low-voltage operating range (0.9V
to 3.6V VCC), high drive needs (up to 24mA), and speed
(maximum propagation delay of 3.5ns, VCC=3.3V). It
achieves this performance while maintaining low CMOS
power dissipation.
Ordering Information
Part Number
Top Mark
NC7SVL08P5X
L08
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
NC7SVL08L6X
CE
6-Lead MicroPak™, 1.00mm Wide
5000 Units on
Tape & Reel
NC7SVL08FHX
CE
6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
5000 Units on
Tape & Reel
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
Package
Packing Method
www.fairchildsemi.com
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
December 2010
IEEE/IEC
A
B
&
Y
Figure 1. Logic Symbol
Pin Configurations
A
1
B
2
GND
3
5
4
VCC
Y
Figure 2. SC70 (Top View)
A
1
6
VCC
B
2
5
NC
GND
3
4
Y
Figure 3. MicroPak™ (Top Through View)
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
Connection Diagrams
Pin Definitions
Pin # SC70
Pin # MicroPak™
Name
Description
1
1
A
2
2
B
3
3
GND
Ground
4
4
Y
Output
5
NC
No Connect
5
6
VCC
Supply Voltage
Input
Input
Function Table
Y = AB
Inputs
A
Output
B
Y
L
L
L
L
H
L
H
L
L
H
H
H
L = Low Logic Level
H = High Logic Level
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
4.6
V
VIN
DC Input Voltage
-0.5
4.6
V
-0.5
VCC to +0.5
V
-0.5
4.6
V
VIN < 0V
-50
mA
VOUT < 0V
-50
VOUT > VCC
+50
VOUT
DC Output Voltage
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IOH / IOL
VCC=0V
DC Output Source/Sink Current
ICC or IGND
TSTG
HIGH or LOW State
(1)
DC VCC or Ground Current per Supply Pin
Storage Temperature Range
-65
mA
±50
mA
±50
mA
+150
°C
TJ
Junction Temperature Under Bias
+150
°C
TL
Junction Lead Temperature (Soldering, 10 Seconds)
+260
°C
PD
Power Dissipation at +85°C
SC70-5
ESD
150
MicroPak™-6
130
MicroPak2™-6
120
mW
Human Body Model
JEDEC: JESD22-A114
4000
Charged Device Model
JEDEC: JESD22-C101
2000
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
Absolute Maximum Ratings
V
Note:
1. The IO maximum rating must be observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
(2)
VOUT
IOH / IOL
Input Voltage
Output Voltage
Output Current in IOH / IOL
Conditions
Min.
Max.
Unit
0.9
3.6
V
V
0
3.6
HIGH or LOW State
0
VCC
VCC=0V
0
3.6
VCC=3.0V to 3.6V
±24.0
VCC=2.3V to 2.7V
±18.0
VCC=1.65V to 1.95V
±6.0
VCC=1.40V to 1.60V
±4.0
VCC=1.10V to 1.30V
±2.0
VCC=0.9V
TA
Δt / ΔV
θJA
Free Air Operating Temperature
Minimum Input Edge Rate
Thermal Resistance
V
±0.1
-40
mA
µA
+85
°C
VIN=0.8V to 2.0V, VCC=3.0V
10
ns/V
SC70-5
425
MicroPak™-6
500
MicroPak2™-6
560
°C/W
Note:
2. Unused inputs must be held HIGH or LOW. They may not float.
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
www.fairchildsemi.com
3
Symbol
VIH
VIL
Parameter
HIGH Level Input
Voltage
LOW Level Input
Voltage
VCC
Conditions
0.65 x VCC
0.65 x VCC
0.65 x VCC
0.65 x VCC
1.40 ≤ VCC ≤ 1.60
0.65 x VCC
0.65 x VCC
1.65 ≤ VCC ≤ 1.95
0.9
0.9
2.30 ≤ VCC ≤ 2.70
1.5
1.5
2.70 ≤ VCC ≤ 3.60
1.5
0.25 x VCC
0.25 x VCC
0.25 x VCC
1.40 ≤ VCC ≤ 1.60
0.25 x VCC
0.25 x VCC
1.65 ≤ VCC ≤ 1.95
0.25 x VCC
0.25 x VCC
2.30 ≤ VCC ≤ 2.70
0.7
0.7
2.70 ≤ VCC ≤ 3.60
0.8
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.2
VCC - 0.2
VCC - 0.2
VCC - 0.2
2.30 ≤ VCC ≤ 2.70
VCC - 0.2
VCC - 0.2
2.70 ≤ VCC ≤ 3.60
VCC - 0.2
VCC - 0.2
1.10 ≤ VCC ≤ 1.30
IOH=-2mA
0.75 x VCC
0.75 x VCC
1.40 ≤ VCC ≤ 1.60
IOH=-4mA
0.75 x VCC
0.75 x VCC
1.25
1.25
2.30 ≤ VCC ≤ 2.70
2.70 ≤ VCC ≤ 3.60
2.70 ≤ VCC ≤ 3.60
Increase in ICC per
Input
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
2.4
2.4
2.2
2.2
0.10
1.40 ≤ VCC ≤ 1.60
0.20
0.20
0.20
0.20
2.30 ≤ VCC ≤ 2.70
0.20
0.20
2.70 ≤ VCC ≤ 3.60
0.20
0.20
IOL=100µA
1.10 ≤ VCC ≤ 1.30
IOL=2mA
0.25 x VCC
0.25 x VCC
1.40 ≤ VCC ≤ 1.60
IOL=4mA
0.25 x VCC
0.25 x VCC
1.65 ≤ VCC ≤ 1.95
IOL=6mA
0.30
0.30
0.40
0.40
IOL=12mA
IOL=18mA
0.40
0.40
0.60
0.60
V
0.40
0.40
IOL=24mA
0.55
0.55
0.90 to 3.60
0 ≤ VIN ≤ 3.6V
±0.1
±0.5
µA
0
0 ≤ (VIN, VO) ≤
3.6V
0.5
0.5
µA
VIN=VCC or GND
0.9
2.70 ≤ VCC ≤ 3.60
ICCT
2.2
1.7
0.10
2.70 ≤ VCC ≤ 3.60
Quiescent Supply
Current
IOH=-24mA
2.2
1.7
0.10
2.30 ≤ VCC ≤ 2.70
ICC
IOH=-18mA
2.0
1.8
0.10
2.70 ≤ VCC ≤ 3.60
Power Off Leakage
Current
IOH=-12mA
2.0
1.8
0.90
2.30 ≤ VCC ≤ 2.70
IOFF
IOH=-6mA
V
1.10 ≤ VCC ≤ 1.30
1.65 ≤ VCC ≤ 1.95
Input Leakage
Current
0.8
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
V
VCC - 0.1
1.10 ≤ VCC ≤ 1.30
2.70 ≤ VCC ≤ 3.60
IIN
1.5
1.10 ≤ VCC ≤ 1.30
IOH=-100µA
Units
V
0.25 x VCC
2.30 ≤ VCC ≤ 2.70
VOL
Max.
0.90
2.30 ≤ VCC ≤ 2.70
LOW Level Output
Voltage
Min.
0.90
1.65 ≤ VCC ≤ 1.95
HIGH Level Output
Voltage
TA=-40 to 85°C
Max.
1.10 ≤ VCC ≤ 1.30
0.90
VOH
TA=25°C
Min.
0.90 to 3.60
VCC ≤ VIN ≤ 3.6V
0.9
±0.9
1.95
VIN=0.9V
6
8
3.6
VIN=1.5V
6
8
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
DC Electrical Characteristics
µA
µA
www.fairchildsemi.com
4
Symbol
Parameter
VCC
Conditions
0.90
CL=15pF,
RL=1MΩ
Min.
1.10 ≤ VCC ≤ 1.30
tPHL, tPLH Propagation Delay
TA=25°C
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
2.70 ≤ VCC ≤ 3.60
CIN
Input Capacitance
0
CPD
Power Dissipation
Capacitance
0.90 to 3.60
Typ.
TA=-40 to 85°C
Max.
Min.
Max.
Units Figure
45.0
CL=15pF,
RL=2kΩ
CL=30pF,
RL=500Ω
3.5
8.2
17.5
3.0
30.5
1.5
4.0
7.0
1.5
7.5
1.1
3.0
5.5
1.0
6.0
0.6
2.2
4.0
0.6
4.5
0.5
1.6
3.5
0.5
4.0
VIN=0V or
VCC, f=10MHz
Figure 4. AC Test Circuit
ns
3
pF
5
pF
Figure 4,
Figure 5
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
AC Electrical Characteristics
Figure 5. AC Waveforms
Symbol
VCC
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ± 0.15V
1.5V ± 0.1V
1.2V ± 0.1V
0.9V
Vmi
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
Vmo
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
www.fairchildsemi.com
5
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
Physical Dimensions
Figure 6. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.
Package Designator
P5X
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
6
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.254)
(0.49)
5X
1.00
(0.75)
PIN 1 IDENTIFIER
5
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
0.25
0.15 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
Notes:
(0.13)
4X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 7. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
Physical Dimensions
0.89
0.35
0.05 C
1.00
2X
B
A
5X 0.40
PIN 1
MIN 250uM
0.66
1.00
1X 0.45
6X 0.19
0.05 C
TOP VIEW
RECOMMENDED LAND PATTERN
FOR SPACE CONSTRAINED PCB
2X
0.90
0.05 C
0.35
0.55MAX
C
5X 0.52
SIDE VIEW
0.73
(0.08) 4X
1
DETAIL A
2
1X 0.57
0.09
0.19 6X
3
0.20 6X
ALTERNATIVE LAND PATTERN
FOR UNIVERSAL APPLICATION
(0.05) 6X
5X 0.35
0.25
0.35
6
5
4
BOTTOM VIEW
0.60
(0.08)
4X
0.10
.05 C
C B A
0.40
0.30
NOTES:
A. COMPLIES TO JEDEC MO-252 STANDARD
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
D. LANDPATTERN RECOMMENDATION IS BASED ON FSC
DESIGN.
E. DRAWING FILENAME AND REVISION: MGF06AREV3
0.075X45°
CHAMFER
DETAIL A
PIN 1 LEAD SCALE: 2X
Figure 8. 6-Lead, MicroPak™2, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
8
NC7SVL08 — TinyLogic® Low-ICCT Two-Input AND Gate
© 2008 Fairchild Semiconductor Corporation
NC7SVL08 • Rev. 1.0.5
www.fairchildsemi.com
9
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
工商网监
湘ICP备2023018690号
