NGTB20N120IHRWG
IGBT with Monolithic Free
Wheeling Diode
This Insulated Gate Bipolar Transistor (IGBT) features a robust and
cost effective Field Stop (FS) Trench construction, provides and
superior performance in demanding switching applications, and offers
low on−state voltage with minimal switching loss. The IGBT is well
suited for resonant or soft switching applications.
http://onsemi.com
20 A, 1200 V
VCEsat = 2.10 V
Eoff = 0.45 mJ
Features
•
•
•
•
•
Extremely Efficient Trench with Fieldstop Technology
Low Switching Loss Reduces System Power Dissipation
Optimized for Low Losses in IH Cooker Application
Reliable and Cost Effective Single Die Solution
These are Pb−Free Devices
C
Typical Applications
• Inductive Heating
• Consumer Appliances
• Soft Switching
G
E
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector−emitter voltage @ TJ = 25°C
VCES
1200
V
Collector current
@ TC = 25°C
@ TC = 100°C
IC
A
Pulsed collector current, Tpulse
limited by TJmax, 10 ms Pulse, VGE =
15 V
ICM
Diode forward current
@ TC = 25°C
@ TC = 100°C
IF
Diode pulsed current, Tpulse limited
by TJmax, 10 ms Pulse, VGE = 0 V
IFM
120
A
Gate−emitter voltage
Transient Gate−emitter voltage
(Tpulse = 5 ms, D < 0.10)
VGE
$20
$25
V
Power Dissipation
@ TC = 25°C
@ TC = 100°C
PD
Operating junction temperature
range
TJ
−40 to +175
°C
Storage temperature range
Tstg
−55 to +175
°C
Lead temperature for soldering, 1/8”
from case for 5 seconds
TSLD
260
°C
40
20
G
120
A
A
40
20
October, 2013 − Rev. 1
TO−247
CASE 340AL
E
MARKING DIAGRAM
20N120IHR
AYWWG
W
384
192
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2013
C
1
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
NGTB20N120IHRWG
TO−247
(Pb−Free)
30 Units / Rail
Publication Order Number:
NGTB20N120IHR/D
NGTB20N120IHRWG
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Thermal resistance junction−to−case
Rating
RqJC
0.39
°C/W
Thermal resistance junction−to−ambient
RqJA
40
°C/W
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IC = 500 mA
V(BR)CES
1200
−
−
V
VGE = 15 V, IC = 20 A
VGE = 15 V, IC = 20 A, TJ = 175°C
VCEsat
−
−
2.10
2.30
2.45
−
V
VGE = VCE, IC = 250 mA
VGE(th)
4.5
5.5
6.5
V
Collector−emitter cut−off current, gate−
emitter short−circuited
VGE = 0 V, VCE = 1200 V
VGE = 0 V, VCE = 1200 V, TJ = 175°C
ICES
−
−
−
−
0.2
2.8
mA
Gate leakage current, collector−emitter
short−circuited
VGE = 20 V, VCE = 0 V
IGES
−
−
100
nA
Cies
−
5320
−
pF
Coes
−
124
−
Cres
−
100
−
Qg
−
225
−
Qge
−
36
−
Qgc
−
98
−
TJ = 25°C
VCC = 600 V, IC = 20 A
Rg = 10 W
VGE = 0 V/ 15V
td(off)
−
235
−
tf
−
155
−
Eoff
−
0.45
−
mJ
TJ = 150°C
VCC = 600 V, IC = 20 A
Rg = 10 W
VGE = 0 V/ 15V
td(off)
−
255
−
ns
tf
−
250
−
Eoff
−
1.10
−
mJ
VGE = 0 V, IF = 20 A
VGE = 0 V, IF = 20 A, TJ = 175°C
VF
−
−
1.75
2.50
2.10
V
STATIC CHARACTERISTIC
Collector−emitter breakdown voltage,
gate−emitter short−circuited
Collector−emitter saturation voltage
Gate−emitter threshold voltage
DYNAMIC CHARACTERISTIC
Input capacitance
Output capacitance
VCE = 20 V, VGE = 0 V, f = 1 MHz
Reverse transfer capacitance
Gate charge total
Gate to emitter charge
VCE = 600 V, IC = 20 A, VGE = 15 V
Gate to collector charge
nC
SWITCHING CHARACTERISTIC, INDUCTIVE LOAD
Turn−off delay time
Fall time
Turn−off switching loss
Turn−off delay time
Fall time
Turn−off switching loss
ns
DIODE CHARACTERISTIC
Forward voltage
http://onsemi.com
2
NGTB20N120IHRWG
TYPICAL CHARACTERISTICS
250
TJ = 25°C
VGE = 20 to 15 V
11 V
150
10 V
100
9V
50
8V
1
2
3
4
6
5
10 V
100
9V
50
8V
7V
0
8
0
1
2
3
4
6
5
7
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 1. Output Characteristics
Figure 2. Output Characteristics
200
11 V
150
10 V
100
9V
50
7V
8V
0
1
2
3
4
5
6
VCE = 20 V
140
TJ = 25°C
120
TJ = 150°C
100
80
60
40
20
0
7
8
160
TJ = −40°C
VGE = 20 to 13 V
0
11 V
150
VCE, COLLECTOR−EMITTER VOLTAGE (V)
250
IC, COLLECTOR CURRENT (A)
7
VGE = 20 to 15 V
13 V
7V
0
TJ = 150°C
200
IC, COLLECTOR CURRENT (A)
0
VCE, COLLECTOR−EMITTER VOLTAGE (V)
IC, COLLECTOR CURRENT (A)
200
13 V
8
0
1
2
3
4
5
6
7
8
9 10
11 12 13
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE, GATE−EMITTER VOLTAGE (V)
Figure 3. Output Characteristics
Figure 4. Typical Transfer Characteristics
3.00
10,000
Cies
IC = 40 A
2.50
C, CAPACITANCE (pF)
IC, COLLECTOR CURRENT (A)
250
IC = 20 A
2.00
IC = 10 A
1.50
1.00
1000
100
Coes
Cres
0.50
0.00
−75 −50 −25 0
10
25
50
75
100 125 150 175 200
TJ = 25°C
0
10
20
30
40
50
60
70
80
90 100
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 5. VCE(sat) vs. TJ
Figure 6. Typical Capacitance
http://onsemi.com
3
NGTB20N120IHRWG
TYPICAL CHARACTERISTICS
16
VGE, GATE−EMITTER VOLTAGE (V)
IF, FORWARD CURRENT (A)
70
60
50
40
TJ = 25°C
30
20
TJ = 150°C
10
0
0
0.5
1.0
1.5
2.0
2.5
8
6
4
VCE = 600 V
VGE = 15 V
IC = 20 A
2
0
0
Eoff
40
60
80
100
120
140
td(off)
tf
100
VCE = 600 V
VGE = 15 V
IC = 20 A
Rg = 10 W
20
40
60
80
100
120
140
TJ, JUNCTION TEMPERATURE (°C)
Figure 9. Switching Loss vs. Temperature
Figure 10. Switching Time vs. Temperature
3
2
1
0
20
160
1000
Eoff
5
0
TJ, JUNCTION TEMPERATURE (°C)
SWITCHING TIME (ns)
4
10
160
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
5
SWITCHING LOSS (mJ)
20
250
1000
0.2
6
200
150
Figure 8. Typical Gate Charge
0.4
0
100
Figure 7. Diode Forward Characteristics
0.6
0
50
QG, GATE CHARGE (nC)
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
10
VF, FORWARD VOLTAGE (V)
VCE = 600 V
VGE = 15 V
IC = 20 A
Rg = 10 W
0.8
12
3.0
1.2
1.0
14
35
50
65
td(off)
10
80
tf
100
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
5
20
35
50
65
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Switching Loss vs. IC
Figure 12. Switching Time vs. IC
http://onsemi.com
4
80
NGTB20N120IHRWG
TYPICAL CHARACTERISTICS
10000
SWITCHING LOSS (mJ)
1.4
Eoff
1.2
1
0.8
0.6
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 20 A
0.4
0.2
0
5
15
25
35
45
55
65
75
SWITCHING TIME (ns)
1.6
td(off)
1000
tf
100
10
85
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 20 A
5
15
25
35
45
55
65
75
Rg, GATE RESISTOR (W)
Rg, GATE RESISTOR (W)
Figure 13. Switching Loss vs. Rg
Figure 14. Switching Time vs. Rg
1.6
85
1000
1.2
Eoff
1
0.8
0.6
IC = 20 A
VGE = 15 V
TJ = 150°C
Rg = 10 W
0.4
0.2
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
1.4
td(off)
tf
100
IC = 20 A
VGE = 15 V
TJ = 150°C
Rg = 10 W
10
275 325
0
250 300 350 400 450 500 550 600 650 700 750 800
Figure 16. Switching Time vs. VCE
100 ms
0.01
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
1000
100
50 ms
dc operation
Single Nonrepetitive
Pulse TC = 25°C
Curves must be derated
linearly with increase
in temperature
0.1
1
675 725 775
Figure 15. Switching Loss vs. VCE
1 ms
1
575 625
VCE, COLLECTOR−EMITTER VOLTAGE (V)
1000
10
375 425 475 525
VCE, COLLECTOR−EMITTER VOLTAGE (V)
10
100
VGE = 15 V, TC = 125°C
100
10
1
1000
1
10
100
1000
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 17. Safe Operating Area
Figure 18. Reverse Bias Safe Operating Area
http://onsemi.com
5
NGTB20N120IHRWG
TYPICAL CHARACTERISTICS
140
1500
120
1450
Ipk (A)
100
80
V(BR)CES (V)
TC = 80°C
TC = 110°C
60
40
20
VCE = 600 V, TJ ≤ 175°C, Rgate = 10 W,
VGE = 0/15 V, Tcase = 80°C or 110°C
(as noted), D = 0.5
0
0.01
0.1
1
10
1400
1350
1300
1250
100
1200
−40
1000
−15
10
35
60
85
110
135
FREQUENCY (kHz)
TJ, JUNCTION TEMPERATURE (°C)
Figure 19. Collector Current vs. Switching
Frequency
Figure 20. Typical V(BR)CES vs. Temperature
1
RqJC = 0.392
50% Duty Cycle
R(t) (°C/W)
0.1 20%
Junction R1
10%
5%
0.01
Rn
C2
Cn
Ci = ti/Ri
2%
C1
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.001
0.000001
R2
0.00001
0.0001
0.001
0.01
PULSE TIME (sec)
Figure 21. IGBT Transient Thermal Impedance
http://onsemi.com
6
0.1
Case
Ri (°C/W)
ti (sec)
0.04597
0.000101
0.009460
0.004201
0.020965
0.040205
0.003094
0.037895
0.016194
0.000100
0.246889
0.000218
0.031311
0.001057
0.007527
0.004770
0.007965
0.323174
0.083449
0.617513
316.228
0.405040
1
10
NGTB20N120IHRWG
Figure 22. Test Circuit for Switching Characteristics
http://onsemi.com
7
NGTB20N120IHRWG
Figure 23. Definition of Turn On Waveform
http://onsemi.com
8
NGTB20N120IHRWG
Figure 24. Definition of Turn Off Waveform
http://onsemi.com
9
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE D
DATE 17 MAR 2017
SCALE 1:1
E
E2/2
D
SEATING
PLANE
Q
2X
2
M
B A
M
NOTE 6
S
NOTE 3
1
0.635
P
A
E2
NOTE 4
4
DIM
A
A1
b
b2
b4
c
D
E
E2
e
F
L
L1
P
Q
S
3
L1
F
NOTE 5
L
2X
B
A
NOTE 4
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
b2
c
b4
3X
e
b
0.25
A1
NOTE 7
M
B A
M
MILLIMETERS
MIN
MAX
4.70
5.30
2.20
2.60
1.07
1.33
1.65
2.35
2.60
3.40
0.45
0.68
20.80
21.34
15.50
16.25
4.32
5.49
5.45 BSC
2.655
--19.80
20.80
3.81
4.32
3.55
3.65
5.40
6.20
6.15 BSC
GENERIC
MARKING DIAGRAM*
XXXXXXXXX
AYWWG
XXXXX
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
*This information is generic. Please refer
to device data sheet for actual part
marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
DOCUMENT NUMBER:
DESCRIPTION:
98AON16119F
TO−247
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative