NSV20101JT1G

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. NSS20101J, NSV20101J 20 V, 1.0 A, Low VCE(sat) NPN Transistor ON Semiconductor’s e2 PowerEdge family of low VCE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (VCE(sat)) and high current gain capability. These are designed for use in low voltage, high speed switching applications where affordable efficient energy control is important. Typical applications are DC−DC converters and power management in portable and battery powered products such as cellular and cordless phones, PDAs, computers, printers, digital cameras and MP3 players. Other applications are low voltage motor controls in mass storage products such as disc drives and tape drives. In the automotive industry they can be used in air bag deployment and in the instrument cluster. The high current gain allows e2PowerEdge devices to be driven directly from PMU’s control outputs, and the Linear Gain (Beta) makes them ideal components in analog amplifiers. http://onsemi.com 20 VOLTS, 1.0 AMPS NPN LOW VCE(sat) TRANSISTOR SC−89 CASE 463C STYLE 1 COLLECTOR 3 1 BASE Features • NSV Prefix for Automotive and Other Applications Requiring • Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant* 2 EMITTER MARKING DIAGRAM 3 Collector AA MG G 1 Base 2 Emitter AA = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping† NSS20101JT1G SC−89 (Pb−Free) 3,000 / Tape & Reel NSV20101JT1G SC−89 (Pb−Free) 3,000 / Tape & Reel Device *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 May, 2013 − Rev. 3 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NSS20101J/D NSS20101J, NSV20101J MAXIMUM RATINGS (TA = 25°C) Symbol Max Unit Collector-Emitter Voltage Rating VCEO 20 Vdc Collector-Base Voltage VCBO 40 Vdc Emitter-Base Voltage VEBO 6.0 Vdc Collector Current − Continuous IC 1.0 A Collector Current − Peak ICM 2.0 A Electrostatic Discharge ESD HBM Class 3B MM Class C THERMAL CHARACTERISTICS Characteristic Symbol Total Device Dissipation TA = 25°C Derate above 25°C PD (Note 1) Thermal Resistance, Junction−to−Ambient RqJA (Note 1) Total Device Dissipation TA = 25°C Derate above 25°C PD (Note 2) Thermal Resistance, Junction−to−Ambient RqJA (Note 2) Junction and Storage Temperature Range TJ, Tstg Max Unit 255 2.0 mW mW/°C 490 300 2.4 415 −55 to +150 °C/W mW mW/°C °C/W °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR−4 @ 100 mm2, 1 oz. copper traces. 2. FR−4 @ 500 mm2, 1 oz. copper traces. http://onsemi.com 2 NSS20101J, NSV20101J ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = 0.1 mAdc, IE = 0) V(BR)CBO Emitter−Base Breakdown Voltage (IE = 0.1 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 30 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = 5.0 Vdc) IEBO Vdc 20 Vdc 40 Vdc 6.0 mAdc 0.1 mAdc 0.1 ON CHARACTERISTICS DC Current Gain (Note 3) (IC = 10 mA, VCE = 2.0 V) (IC = 100 mA, VCE = 2.0 V) (IC = 500 mA, VCE = 2.0 V) (IC = 1.0 A, VCE = 2.0 V) hFE Collector −Emitter Saturation Voltage (Note 3) (IC = 10 mA, IB = 0.5 mA) (IC = 0.10 A, IB = 0.010 A) (IC = 0.5 A, IB = 0.050 A) (IC = 1.0 A, IB = 0.1 A) VCE(sat) Base −Emitter Saturation Voltage (Note 3) (IC = 0.5 A, IB = 50 mA) VBE(sat) Base −Emitter Turn−on Voltage (Note 3) (IC = 0.5 A, VCE = 2.0 V) VBE(on) Cutoff Frequency (IC = 100 mA, VCE = 2.0 V, f = 100 MHz) 200 200 150 100 500 V 0.015 0.040 0.115 0.220 V 1.1 V 0.90 fT MHz 350 Input Capacitance (VEB = 0.5 V, f = 1.0 MHz) Cibo 40 pF Output Capacitance (VCB = 4.0 V, f = 1.0 MHz) Cobo 6 pF 3. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%. TYPICAL CHARACTERISTICS 600 150°C 0.35 hFE, DC CURRENT GAIN PD, POWER DISSIPATION (W) 0.40 0.30 0.25 Note 2 0.20 Note 1 0.15 0.10 0.05 0 0 20 40 60 80 100 120 140 400 25°C 300 −55°C 200 100 0 160 VCE = 2 V 500 0.001 0.01 0.1 1 TJ, JUNCTION TEMPERATURE (°C) IC, COLLECTOR CURRENT (A) Figure 1. Power Derating Figure 2. DC Current Gain http://onsemi.com 3 10 NSS20101J, NSV20101J TYPICAL CHARACTERISTICS 1 150°C VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) VCE = 4 V 500 400 25°C 300 −55°C 200 100 0 0.001 0.01 0.1 1 10 VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 150°C −55°C 0.01 0.1 1 10 IC, COLLECTOR CURRENT (A) 1.4 VBE(on), BASE−EMITTER VOLTAGE (V) VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) Figure 5. Collector−Emitter Saturation Voltage IC/IB = 50 1.2 −55°C 25°C 150°C 0.4 0.2 0.001 0.001 0.01 0.1 1 10 Figure 4. Collector−Emitter Saturation Voltage 0.01 0.6 IC/IB = 10 Figure 3. DC Current Gain 0.1 0.8 0.01 IC, COLLECTOR CURRENT (A) 25°C 1.0 −55°C IC, COLLECTOR CURRENT (A) IC/IB = 20 0.001 25°C 0.1 0.001 1 0.001 150°C 0.01 VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 600 0.1 1 10 1.4 IC/IB = 10 1.2 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) Figure 6. Base−Emitter Saturation Voltage 1.6 VCE = 2 V 1.4 1.2 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 7. Base−Emitter Saturation Voltage Figure 8. Base−Emitter Voltage http://onsemi.com 4 10 10 NSS20101J, NSV20101J TYPICAL CHARACTERISTICS 60 Cibo, INPUT CAPACITANCE (pF) IC = 2 A IC = 1 A IC = 0.5 A 0.1 IC = 0.1 A IC = 50 mA 0.01 0.0001 0.001 0.01 0.1 10 0 1 2 3 4 5 6 Figure 10. Input Capacitance 8 6 4 2 10 15 20 25 30 35 7 TJ = 25°C fTEST = 1 MHz VCE = 2 V 350 300 250 200 150 100 50 0 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Figure 11. Output Capacitance Figure 12. Current Gain Bandwidth Product 10 TJ = 25°C 100 ms 1 1 ms 0.5 ms Thermal Limit 0.1 0.01 10 ms 0.1 1 10 VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 13. Safe Operating Area http://onsemi.com 5 8 400 VCB, COLLECTOR−BASE VOLTAGE (V) IC, COLLECTOR CURRENT (A) Cobo, OUTPUT CAPACITANCE (pF) 20 Figure 9. Saturation Region TJ = 25°C fTEST = 1 MHz 5 30 VEB, BASE EMITTER VOLTAGE (V) 10 0 40 IB, BASE CURRENT (A) 12 0 TJ = 25°C fTEST = 1 MHz 50 0 1 fTau, CURRENT GAIN BANDWIDTH PRODUCT VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 1 100 1 NSS20101J, NSV20101J PACKAGE DIMENSIONS SC−89 3 LEAD CASE 463C−03 ISSUE C A −X− 3 1 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 463C−01 OBSOLETE, NEW STANDARD 463C−02. B −Y− S K G 2 PL D 0.08 (0.003) M C M DIM A B C D G H J K L M N S 3 PL X Y N J −T− MILLIMETERS MIN NOM MAX 1.50 1.60 1.70 0.75 0.85 0.95 0.60 0.70 0.80 0.23 0.28 0.33 0.50 BSC 0.53 REF 0.10 0.15 0.20 0.30 0.40 0.50 1.10 REF −−− −−− 10 _ −−− −−− 10 _ 1.50 1.60 1.70 INCHES NOM MAX 0.063 0.067 0.034 0.040 0.028 0.031 0.011 0.013 0.020 BSC 0.021 REF 0.004 0.006 0.008 0.012 0.016 0.020 0.043 REF −−− −−− 10 _ −−− −−− 10 _ 0.059 0.063 0.067 MIN 0.059 0.030 0.024 0.009 STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR SEATING PLANE SOLDERING FOOTPRINT* H H L G *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSS20101J/D