NTLUS4C12NTBG

NTLUS4C12N MOSFET – Power, Single, N-Channel, mCool, UDFN6, 2.0x2.0x0.55 mm 30 V, 10.7 A www.onsemi.com Features • Low Profile UDFN 2.0 x 2.0 x 0.55 mm for Board Space Saving with • • • • Exposed Drain Pads for Excellent Thermal Conduction Ultra Low RDS(on) to Reduce Conduction Losses Optimized Gate Charge to Reduce Switching Losses Low Capacitance to Minimize Driver Losses These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MOSFET RDS(on) MAX V(BR)DSS ID MAX 9 mW @ 10 V 12 mW @ 4.5 V 30 V 10.7 A 15 mW @ 3.7 V 19 mW @ 3.3 V Applications D • Power Load Switch • Synch DC−DC Converters • Wireless Charging Circuit G MAXIMUM RATINGS (TJ = 25°C unless otherwise stated) Parameter Symbol Value Unit Drain-to-Source Voltage VDSS 30 V Gate-to-Source Voltage VGS ±20 V ID 10.7 A Continuous Drain Current (Note 1) Power Dissipation (Note 1) Continuous Drain Current (Note 2) Steady State TA = 25°C TA = 85°C 7.7 t≤5s TA = 25°C 15.1 Steady State TA = 25°C t≤5s TA = 25°C Steady State TA = 25°C PD W 1.54 S D Pin 1 ID 6.8 MARKING DIAGRAM 1 UDFN6 (mCOOL]) CASE 517BG AGMG G AG = Specific Device Code M = Date Code G = Pb−Free Package 3.1 TA = 85°C A (Note: Microdot may be in either location) W PIN CONNECTIONS 4.9 Power Dissipation (Note 2) TA = 25°C PD Pulsed Drain Current tp = 10 ms IDM 43 A TJ, TSTG -55 to 150 °C Source Current (Body Diode) (Note 1) IS 1.55 A Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) TL 260 °C MOSFET Operating Junction and Storage Temperature S N−CHANNEL MOSFET 0.63 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Surface Mounted on FR4 Board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces). 2. Surface-mounted on FR4 board using the minimum recommended pad size, 2 oz. Cu. D 1 D 2 G 3 6 D 5 D 4 S D S (Top View) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. © Semiconductor Components Industries, LLC, 2014 May, 2019 − Rev. 1 1 Publication Order Number: NTLUS4C12N/D NTLUS4C12N THERMAL RESISTANCE RATINGS Symbol Max Junction-to-Ambient – Steady State (Note 3) RθJA 81 Junction-to-Ambient – t ≤ 5 s (Note 3) RθJA 40.5 Junction-to-Ambient – Steady State min Pad (Note 4) RθJA 200 Parameter Unit °C/W 3. Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces). 4. Surface-mounted on FR4 board using the minimum recommended pad size, 2 oz. Cu. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ ID = 250 mA, ref to 25°C Typ Max Units OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS VGS = 0 V, VDS = 24 V Gate-to-Source Leakage Current IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS = VDS, ID = 250 mA V 12 TJ = 25°C mV/°C 1.0 TJ = 125°C mA 10 ±100 nA 2.1 V ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temp. Coefficient Drain-to-Source On Resistance Forward Transconductance VGS(TH)/TJ 1.3 4.8 RDS(on) gFS mV/°C mW VGS = 10 V, ID = 9.0 A 7.2 9 VGS = 4.5 V, ID = 8.0 A 9.3 12 VGS = 3.7 V, ID = 5.0 A 10.9 15 VGS = 3.3 V, ID = 5.0 A 13 19 VDS = 15 V, ID = 9.0 A 39 S 1172 pF CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance Output Capacitance Reverse Transfer Capacitance CISS COSS CRSS Total Gate Charge QG(TOT) Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD Total Gate Charge VGS = 0 V, f = 1 MHz, VDS = 15 V 546 26 8.4 VGS = 4.5 V, VDS = 15 V; ID = 8.0 A nC 1.1 3.0 2.2 QG(TOT) VGS = 10 V, VDS = 15 V; ID = 9.0 A 18 nC 9.4 ns SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) tr td(OFF) VGS = 4.5 V, VDD = 15 V, ID = 8.0 A, RG = 3 W tf 15 14 3.5 SWITCHING CHARACTERISTICS, VGS = 10 V (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) 6.3 tr 14 td(OFF) VGS = 10 V, VDD = 15 V, ID = 9.0 A, RG = 3 W tf 18 2.4 5. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%. 6. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 ns NTLUS4C12N ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Units TJ = 25°C 0.72 1.1 V TJ = 125°C 0.52 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 1.5 A ns 29 14.1 VGS = 0 V, dIs/dt = 100 A/ms, IS = 1.5 A 14.9 QRR 20 nC 5. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%. 6. Switching characteristics are independent of operating junction temperatures. Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. TYPICAL CHARACTERISTICS 3.2 − 10 V 35 3.0 V 20 TJ = 25°C 15 2.6 V 10 2.4 V 5 2.0 V 0 0 0.5 1.0 1.5 2.0 25 TJ = 125°C TJ = 25°C 20 15 10 5 2.2 V 2.5 VDS = 5 V 30 VGS = 2.8 V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 25 0 3.0 TJ = −55°C 1.0 1.5 2.0 2.5 VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics 3.0 21 17 TJ = 25°C ID = 9 A 17 RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW) RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW) 19 15 VGS = 3.3 V 13 15 13 11 9 7 TJ = 25°C 3 4 5 6 7 8 9 VGS = 4.5 V 9 VGS = 10 V 7 5 10 VGS = 3.7 V 11 1 2 3 4 5 6 7 8 VGS, GATE−TO−SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. Gate−to−Source Voltage Figure 4. On−Resistance vs. Drain Current and Gate Voltage www.onsemi.com 3 9 NTLUS4C12N TYPICAL CHARACTERISTICS 10,000 1.5 VGS = 10 V ID = 9 A 1.4 TJ = 150°C IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (Normalized) 1.6 1.3 1000 1.2 1.1 1.0 0.9 0.7 0.6 −50 TJ = 85°C VGS = 0 V −25 0 25 50 75 100 125 150 VGS, GATE−TO−SOURCE VOLTAGE (V) Ciss 1000 800 Coss 600 400 200 Crss 5 10 15 20 25 30 20 25 30 10 QT 8 6 4 Qgs Qgd TJ = 25°C VGS = 10 V VDD = 15 V ID = 8 A 2 0 0 2 4 6 8 10 12 14 16 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage vs. Total Charge 1000 IS, SOURCE CURRENT (A) 1.4 VDD = 15 V ID = 15 A VGS = 10 V td(off) 100 tf tr td(on) 10 1 15 Figure 6. Drain−to−Source Leakage Current vs. Voltage 1200 1 10 Figure 5. On−Resistance Variation with Temperature TJ = 25°C VGS = 0 V 0 5 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1400 0 10 TJ, JUNCTION TEMPERATURE (°C) 1600 C, CAPACITANCE (pF) 100 0.8 1800 t, TIME (ns) TJ = 125°C 10 VGS = 0 V 1.2 1.0 0.8 0.6 TJ = 125°C 0.4 TJ = 25°C 0.2 0 100 18 0.4 0.5 0.6 0.7 0.8 RG, GATE RESISTANCE (W) VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current www.onsemi.com 4 NTLUS4C12N TYPICAL CHARACTERISTICS 100 ID, DRAIN CURRENT (A) 10 ms 10 100 ms 1 ms 1 0.1 0.01 10 ms 0 V < VGS < 10 V TA = 25°C Single Pulse Response RDS(on) Limit Thermal Limit Package Limit 0.01 0.1 dc 1 10 100 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area 100 50% Duty Cycle R(t) (°C/W) 20% 10 10% 5% 2% 1 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 12. Thermal Response DEVICE ORDERING INFORMATION Package Shipping† NTLUS4C12NTAG UDFN6 (Pb−Free) 3000 / Tape & Reel NTLUS4C12NTBG UDFN6 (Pb−Free) 3000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. mCool is a trademark of Semiconductor Components Industries, LLC (SCILLC). www.onsemi.com 5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS UDFN6 2x2, 0.65P CASE 517BG−01 ISSUE A DATE 04 FEB 2010 SCALE 4:1 D PIN ONE REFERENCE 0.10 C 0.10 C ÉÉ ÇÇÇ ÉÉ ÇÇ ÉÉÉ B A ÍÍ ÍÍ ÍÍ EXPOSED Cu PLATING E NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 1. CENTER TERMINAL LEAD IS OPTIONAL. CENTER TERMINAL IS CONNECTED TO TERMINAL LEAD # 4. 2. LEADS 1, 2, 5 AND 6 ARE TIED TO THE FLAG. MOLD CMPD DETAIL B OPTIONAL CONSTRUCTIONS L L TOP VIEW DETAIL B A A3 0.10 C DIM A A1 A3 b b1 D D2 E E2 e K J J1 L L1 L2 L1 DETAIL A OPTIONAL CONSTRUCTIONS 0.08 C NOTE 4 A1 C SIDE VIEW D2 DETAIL A 6X L SEATING PLANE 1 L2 3 GENERIC MARKING DIAGRAM* e 1 b1 0.10 C A E2 0.05 C K 6 4 6X B NOTE 5 0.10 C A 0.05 C XXMG G XX = Specific Device Code M = Date Code (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. b J J1 MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.13 REF 0.25 0.35 0.51 0.61 2.00 BSC 1.00 1.20 2.00 BSC 1.10 1.30 0.65 BSC 0.15 REF 0.27 BSC 0.65 BSC 0.20 0.30 --0.10 0.20 0.30 B NOTE 3 BOTTOM VIEW RECOMMENDED MOUNTING FOOTPRINT 2.30 1.10 6X 6X 0.35 0.43 1 0.60 1.25 0.35 0.34 0.65 PITCH DOCUMENT NUMBER: DESCRIPTION: 98AON48158E UDFN6 2X2, 0.65P PACKAGE OUTLINE 0.66 DIMENSIONS: MILLIMETERS Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative