PN2907ARLRA

PN2907A Preferred Device General Purpose Transistor PNP Silicon http://onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO –60 Vdc Collector–Base Voltage VCBO –60 Vdc Emitter–Base Voltage VEBO –5.0 Vdc Collector Current – Continuous IC –600 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 Watts mW/°C –55 to +150 °C Operating and Storage Junction Temperature Range TJ, Tstg COLLECTOR 3 2 BASE 1 EMITTER 1 2 THERMAL CHARACTERISTICS 3 Symbol Max Unit Thermal Resistance, Junction to Ambient RθJA 200 °C/W TO–92 CASE 29 STYLE 1 Thermal Resistance, Junction to Case RθJC 83.3 °C/W MARKING DIAGRAM Characteristic PN2 907A YWW PN2907A = Device Code Y = Year WW = Work Week ORDERING INFORMATION Device Package Shipping PN2907A TO–92 5000 Units/Box PN2907ARLRA TO–92 2000/Tape & Reel Preferred devices are recommended choices for future use and best overall value.  Semiconductor Components Industries, LLC, 2001 August, 2001 – Rev. 0 1 Publication Order Number: PN2907A/D PN2907A ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit Collector–Emitter Breakdown Voltage (Note 1.) (IC = –10 mAdc, IB = 0) V(BR)CEO –60 – Vdc Collector–Base Breakdown Voltage (IC = –10
Adc, IE = 0) V(BR)CBO –60 – Vdc Emitter–Base Breakdown Voltage (IE = –10
Adc, IC = 0) V(BR)EBO –5.0 – Vdc Collector Cutoff Current (VCE = –30 Vdc, VEB(off) = –0.5 Vdc) ICEX – –50 nAdc Collector Cutoff Current (VCB = –50 Vdc, IE = 0) (VCB = –50 Vdc, IE = 0, TA = 150°C) ICBO – – –0.01 –10 Base Current (VCE = –30 Vdc, VEB(off) = –0.5 Vdc) IB – –50 75 100 100 100 50 – – – 300 – – – –0.4 –1.6 – – –1.3 –2.6 fT 200 – MHz Output Capacitance (VCB = –10 Vdc, IE = 0, f = 1.0 MHz) Cobo – 8.0 pF Input Capacitance (VEB = –2.0 Vdc, IC = 0, f = 1.0 MHz) Cibo – 30 pF ton – 45 ns td – 10 ns tr – 40 ns toff – 100 ns ts – 80 ns tf – 30 ns OFF CHARACTERISTICS µAdc nAdc ON CHARACTERISTICS DC Current Gain (IC = –0.1 mAdc, VCE = –10 Vdc) (IC = –1.0 mAdc, VCE = –10 Vdc) (IC = –10 mAdc, VCE = –10 Vdc) (IC = –150 mAdc, VCE = –10 Vdc) (Note 1.) (IC = –500 mAdc, VCE = –10 Vdc) (Note 1.) hFE Collector–Emitter Saturation Voltage (Note 1.) (IC = –150 mAdc, IB = –15 mAdc) (IC = –500 mAdc, IB = –50 mAdc) VCE(sat) Base–Emitter Saturation Voltage (Note 1.) (IC = –150 mAdc, IB = –15 mAdc) (IC = –500 mAdc, IB = –50 mAdc) VBE(sat) – Vdc Vdc SMALL–SIGNAL CHARACTERISTICS Current–Gain – Bandwidth Product (Notes 1. and 2.), (IC = –50 mAdc, VCE = –20 Vdc, f = 100 MHz) SWITCHING CHARACTERISTICS Turn–On Time Delay Time (VCC = –30 Vdc, IC = –150 mAdc, IB1 = –15 15 mAdc) Ad ) (Figures (Fi 1 and d 5) Rise Time Turn–Off Time Storage Time (VCC = –6.0 Vdc, IC = –150 mAdc, IB1 = IB2 = 15 mAdc) Ad ) (Figure (Fi 2) Fall Time 1. Pulse Test: Pulse Width
300
s, Duty Cycle
2%. 2. fT is defined as the frequency at which |hfe| extrapolates to unity. http://onsemi.com 2 PN2907A INPUT Zo = 50 Ω PRF = 150 PPS RISE TIME ≤ 2.0 ns P.W. < 200 ns -30 V 200 1.0 k 0 TO OSCILLOSCOPE RISE TIME ≤ 5.0 ns 50 -16 V 200 ns Figure 1. Delay and Rise Time Test Circuit INPUT Zo = 50 Ω PRF = 150 PPS RISE TIME ≤ 2.0 ns P.W. < 200 ns +15 V -6.0 V 1.0 k 1.0 k 0 -30 V 50 37 TO OSCILLOSCOPE RISE TIME ≤ 5.0 ns 1N916 200 ns Figure 2. Storage and Fall Time Test Circuit http://onsemi.com 3 PN2907A TYPICAL CHARACTERISTICS hFE , NORMALIZED CURRENT GAIN 3.0 VCE = -1.0 V VCE = -10 V 2.0 TJ = 125°C 25°C 1.0 -
55°C 0.7 0.5 0.3 0.2 -0.1 -0.2 -0.3 -0.5 -0.7 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 -50 -70 -100 -200 -300 -500 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 3. DC Current Gain -1.0 -0.8 IC = -1.0 mA -10 mA -100 mA -500 mA -0.6 -0.4 -0.2 0 -0.005 -0.02 -0.03 -0.05 -0.07 -0.1 -0.01 -0.2 -0.3 -0.5 -0.7 -1.0 IB, BASE CURRENT (mA) -2.0 -3.0 -20 -30 -5.0 -7.0 -10 -50 Figure 4. Collector Saturation Region 500 tr 100 70 50 300 VCC = -30 V IC/IB = 10 TJ = 25°C 200 t, TIME (ns) t, TIME (ns) 300 200 30 20 10 td @ VBE(off) = 0 V 7.0 5.0 3.0 -5.0 -7.0 -10 tf 100 70 50 30 t′s = ts - 1/8 tf 20 10 7.0 5.0 -5.0 -7.0 -10 2.0 V -20 -30 -50 -70 -100 IC, COLLECTOR CURRENT VCC = -30 V IC/IB = 10 IB1 = IB2 TJ = 25°C -200 -300 -500 Figure 5. Turn–On Time -20 -30 -50 -70 -100 -200 -300 -500 IC, COLLECTOR CURRENT (mA) Figure 6. Turn–Off Time http://onsemi.com 4 PN2907A TYPICAL SMALL–SIGNAL CHARACTERISTICS NOISE FIGURE VCE = 10 Vdc, TA = 25°C 10 10 8.0 8.0 NF, NOISE FIGURE (dB) IC = -1.0 mA, Rs = 430 Ω -500 µA, Rs = 560 Ω -50 µA, Rs = 2.7 kΩ -100 µA, Rs = 1.6 kΩ 6.0 4.0 Rs = OPTIMUM SOURCE RESISTANCE 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 C, CAPACITANCE (pF) 50 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k f, FREQUENCY (kHz) Rs, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects Figure 8. Source Resistance Effects 20 Ceb 10 7.0 5.0 Ccb 3.0 -0.2 -0.3 -0.5 -1.0 -2.0 -3.0 -5.0 -10 -20 -30 50 k 400 300 200 100 80 VCE = -20 V TJ = 25°C 60 40 30 20 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 -1000 REVERSE VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (mA) Figure 9. Capacitances Figure 10. Current–Gain — Bandwidth Product +0.5 -1.0 -0.6 0 VBE(sat) @ IC/IB = 10 COEFFICIENT (mV/ ° C) TJ = 25°C -0.8 V, VOLTAGE (VOLTS) IC = -50 µA -100 µA -500 µA -1.0 mA 4.0 0 100 30 2.0 -0.1 6.0 2.0 f T, CURRENT-GAIN BANDWIDTH PRODUCT (MHz) NF, NOISE FIGURE (dB) f = 1.0 kHz VBE(on) @ VCE = -10 V -0.4 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -0.5 -1.0 -1.5 RVB for VBE -2.0 VCE(sat) @ IC/IB = 10 0 -0.1 -0.2 RVC for VCE(sat) -50 -100 -200 -2.5 -0.1 -0.2 -0.5 -1.0 -2.0 -500 -5.0 -10 -20 -50 -100 -200 -500 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 11. “On” Voltage Figure 12. Temperature Coefficients http://onsemi.com 5 PN2907A PACKAGE DIMENSIONS TO–92 TO–226AA CASE 29–11 ISSUE AL A B R P NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. L SEATING PLANE K DIM A B C D G H J K L N P R V D X X G J H V C SECTION X–X 1 N N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR http://onsemi.com 6 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- PN2907A Notes http://onsemi.com 7 PN2907A ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800–282–9855 Toll Free USA/Canada http://onsemi.com 8 PN2907A/D