SB01-05Q-TL-E

Ordering number : EN2932B SB01-05Q Schottky Barrier Diode http://onsemi.com 50V, 0.1A, Low IR, Single MCP Applications • High frequency rectification (switching regulators, converters, choppers) Features • • • • • Fast reverse recovery time (trr max=10ns) Low forward voltage (VF max=0.55V) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Small-sized package, permitting SB01-05Q-applied sets to be compact and slim Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 50Hz sine wave, 1 cycle Unit 50 V 55 V 100 mA 2 A Tj --55 to +125 °C Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7023A-005 • Package : MCP • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel SB01-05Q-TL-E 0.2 0.15 3 0.9 Packing Type: TL Marking 1.25 0 to 0.08 LOT No. 1 A 2 0.65 LOT No. TL 0.3 0.3 0.425 2.1 0.425 2.0 1 : Anode 2 : No Contact 3 : Cathode Electrical Connection 3 MCP 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 71812 TKIM/33098HA (KT)/92995GI (KOTO)/D288TA, TS No.2932-1/5 SB01-05Q Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage Ratings Conditions min VR VF IR=50μA IF=100mA Interterminal Capacitance IR C VR=25V VR=10V, f=1MHz Reverse Recovery Time trr IF=IR=10mA, See specified Test Circuit. Forward Voltage Reverse Current typ Unit max 50 V 0.55 15 4.4 V μA pF 10 ns trr Test Circuit 100Ω 10Ω 10mA 50Ω 1mA 10mA Duty≤10% 10μs 5V trr Ordering Information Device SB01-05Q-TL-E Package Shipping memo MCP 3,000pcs./reel Pb Free IF -- VF 5 5 3 2 Ta=125°C 2 10 7 5 25° C 12 5°C 3 2 Reverse Current, IR -- μA 100 7 5 Ta= Forward Current, IF -- A IR -- VR 1000 3 2 100 100°C 5 2 75°C 10 5 50°C 2 1.0 5 25°C 2 0.1 5 1.0 7 5 2 0.01 0.1 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF -- V 0.7 20 30 3 2 10 7 5 3 2 40 50 60 70 ID00266 IS -- t 2.8 f=1MHz Interterminal Capacitance, C -- pF 10 Reverse Voltage, VR -- V C -- VR 5 1.0 1.0 0 ID00265 Surge Forward Current, IFSM(Peak) -- A 0 Current waveform 50Hz sine wave 2.4 IS 20ms t 2.0 1.6 1.2 0.8 0.4 0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 ID00267 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00268 No.2932-2/5 SB01-05Q Embossed Taping Specification SB01-05Q-TL-E No.2932-3/5 SB01-05Q Outline Drawing SB01-05Q-TL-E Land Pattern Example Mass (g) Unit 0.006 mm * For reference Unit: mm 2.1 1.0 0.7 0.65 0.65 No.2932-4/5 SB01-05Q ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.2932-5/5