7.4*6.2*5.25mm Infrared Receiver Module OSRB38C9AA
■Features
●
■Outline
Dimension
3.0±:secnareloT mm:tinU CCV .3 DNUORG .2 TUPTUO .1
Miniature size Built-in exclusive IC Wide half angle & long reception distance Good noise-proof capability High immunity against ambient light Back Metal Cover Side view Mesh
● ●
●
●
●
●
●
■Applications
●
AV instruments (Audio, TV, VCR, CD player) Home appliances (Air-conditioner, Fan, Light.) Remote control for wireless devices
3 2 1
● ●
Supply Voltage Operating Temperature Storage Temperature Lead Soldering Temperature *1
Vcc Topr Tstg Tsol
6.0 -10 ~ +60 -20 ~ +75 260
V
*1 At the position of 2mm from the bottom of the package within 5 seconds
Supply Voltage Current Consumption Reception Distance
B.P.F. Center Frequency
Vcc Icc d Fo Input signal=0 200
2.7 15 -
3.0 0.9 20 37.9 940
5.5 1.5 -
5Lux, Vcc=3V
KHZ nm
Peak Wavelength Signal Output
High level output voltage
p
So
Vcc=3V Vcc=5V Vin=0V Isink=2.0mA
--Active Low--
Voh Vol Bw
2.7 4.7 400
3.0 5.0 0.2 0.4
Low level output voltage Burst width tolerance *2 Half Angle
Burst Wave=60
600 90
800
*2 The output tolerance of burst width received when transmitter sends the burst wave.
LED & Application Technologies
http://www.optosupply.com
ti n U
Item
Symbol
Condition
deg
sμ
)
(Ta=25
s μ0
℃ ℃ ℃ ℃
■Electrical
-Optical Characteristics
Min.
Typ.
Max.
V
mA m
V V V
0
0
Parameter
Symbol
Ratings
Unit
)
(Ta=25
℃ ℃ ℃ ℃
-
■Absolute
Maximum Rating
■Directivity
℃ ℃
VER A.0
℃
±
θΔ
λ
7.4*6.2*5.25mm Infrared Receiver Module OSRB38C9AA ■ Carrier Frequency
Relative Reception Distance vs Transmitter carrier Frequency
■ For Noisy Power Supply
In case of noisy power supply, please serially insert 10
■ Block Diagram
LED & Application Technologies
http://www.optosupply.com
sa dnuorg dna enil ccV ni roticapac citylortcele Fμ74 tuoba dna rotsiser Ω0
oF
: s w oll of
d
VER A.0
7.4*6.2*5.25mm Infrared Receiver Module OSRB38C9AA
■ Testing Method
Distance between emitter and detector specifies maximum distance that output waveform satisfies the standard (FIG-3) under the standard transmitter. a. b. c. Measuring place Indoor Without extreme reflection of light. Ambient light source Detecting surface illumination is 200 5Lux under ordinary white fluorescence lamp of no high frequency lightning.
circuit specified in FIG-3
Sensing Distance: d
VCC OUT
emit
GND
dT
FIG-1
hoV oV
■ Precautions for Use
a. Store and use where there is no force causing transformation or change in quality. b. Store and use where there is no corrosive gas or sea(salt) breeze. c. Store and use where there is no extreme humidity. d. Solder the lead pin within the condition of ratings. After soldering, do not add exterior force. e. Do not wash this device. Wipe the stains of diode side with a soft cloth. You can use the solvent, ethyl alcohol, or methyl alcohol only. f. To prevent static electricity damage to the pre-amp, make sure that the human body, the soldering iron are connected to ground before using.
LED & Application Technologies
http://www.optosupply.com
VER A.0
emit
ffoT
sm001=cycT
Standard Transmitter
su006
≧o ≧o
Standard transmitter Transmitter wave indicated in FIG-2 of standard transmitter is arranged to satisfy V
2-GIF
su006
langis tuptuO
noT
langis tseT
loV
DNG
V5
oV
tiucriC tnemrusaeM tuptuO rewoP 3-GIF
ΩK01
Fu01
± ±
50mVp-p under the measuring
ΩK01
DEL RI mn049
rettimsnarT dradnatS
很抱歉,暂时无法提供与“OSRB38C9AA”相匹配的价格&库存,您可以联系我们找货
免费人工找货