TRSL-7385W-CXX0

Optoway FEATURES l l l l l TRSL-7385W-CXX0 ******************************************************************************************************************************************************************************** TRSL-7385W-CXX0 3.3V / CWDM / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER ******************************************************************************************************************************************************************************* DESCRIPTION D uplex LC Single Mode Transceiver Compliant with IEEE 802.3z 1000BASE Compliant with Fiber Channel 1X SM-LC-L FC-PI Small Form Factor, RJ-45 size, 2X10 pin Package 1 8-Wavelength CWDM DFB LD Transmitter from 1270 nm to 1610 nm, with step 20 nm l 2 7 dB Link Power Budget at Least l Analog Monitor Function -- Transmitter Laser Bias Current -- Transmitter Laser Optical Power Monitor -- Receiver Photo Detector Current l AC/AC Coupled Signal Input / Output l LVTTL Transmitter Disable Input l LVTTL Signal Detection Output l Single +3.3 V Power Supply l 0 to 70oC Operation l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant The TRSL-7385W-CXX0 series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber Channel 1X SM-LC-L FC-PI. There are eighteen center wavelengths available from 1270 nm to 1610 nm. A guaranteed minimum optical link budget of 27 dB is offered. The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Gigabit Ethernet Switches and Routers l Fiber Channel Switch Infrastructure l X DSL Applications ORDER INFORMATION P /No. Bit Rate (Gb/s) 1000 BASE Power Budget (dB) > 27 Wavelength Package (nm) CWDM* 2 X10 LC Temp. (oC) 0 to 70 TX Power RX Sens. (dBm) (dBm) 5 to 0 -27 Signal Detect LVTTL TRSL-7385W-CXX0 1.25/1.063 o CWDM Wavelength (0 to 70 C) Central Min. Typ. Max. Central Wavelength (nm) (nm) (nm) Wavelength -C270 1264.5 1270 1277.5 -C450 -C290 1284.5 1290 1297.5 -C470 -C310 1304.5 1310 1317.5 -C490 -C330 1324.5 1330 1337.5 -C510 -C350 1344.5 1350 1357.5 -C530 -C370 1364.5 1370 1377.5 -C550 -C390 1384.5 1390 1397.5 -C570 -C410 1404.5 1410 1417.5 -C590 -C430 1424.5 1430 1437.5 -C610 CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. Min. (nm) 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 Typ. (nm) 1450 1470 1490 1510 1530 1550 1570 1590 1610 Max. (nm) 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 ****************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6 /30/2004 V1.0 Optoway Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 0 GND 0 Max 85 70 260 4.5 Vcc 30 Units o C o C o C V V mA TRSL-7385W-CXX0 Notes Wit air flow 1m/sec 10 seconds on leads only *************************************************************************************************************************************************************************** Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Symbol Vcc Topr Min 3.1 0 1000 Typ 3.3 1250 200 Max 3.5 70 300 Units / Notes V o C / air flow 1m/sec Mb/s mA Transmitter Specifications (0 oC < Topr < 70 oC, 3.1V < Vcc < 3. 5V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ --λ ----Max 5 λ+7.5 1 --0.26 0.26 -120 0.227 Units dBm nm nm dB dB ns ns dB/Hz ns µA µA mV V V V V ms Notes 1 2 -20 dB Width Po 0 λ-5.5 λ --∆λ SMSR 30 ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS -350 20% to 80% Values 20% to 80% Values 3 350 300 -2.0 -1.1 0 Vcc – 1 .3 -1.58 -0.74 0 .5 Vcc 1 4 4 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 6 /30/2004 V1.0 Optoway Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – H igh Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---36 1.0 1100 -2.0 -1.1 2 .0 Typ --0 --------Max -27 ---27 --1620 -1.58 -0.74 0 .8 TRSL-7385W-CXX0 Units dBm dBm dBm dBm dB nm V V V V Notes 1 Transition: low to high Transition: high to low *************************************************************************************************************************************************************************** VOL - VCC VOH - VCC VOL VOH 2 2 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. ANALOG DIAGNOSTICS FUNCTIONS Parameter Transmitter Laser Bias Current Monitor Monitor Photodiode Current Monitor Receiver Received Photocurrent Photodiode Responsivity Applied Voltage at VpdR pin Symbol Bmon+, BmonPmon+,PmonRpd R Vpd Min 0 0 0 0.5 2.4 Typ Max Vcc Vcc 1 1.0 Vcc Units V V mA A/W V Notes 1 2 3 3 0.9 Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following formula: Ibias = V (Bmon+ - Bmon-) / 10 Ω. See below the equivalent circuit. 2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the following formula: Imon = V (Pmon+ - Pon-) / 200Ω. See below the equivalent circuit. 3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified above. The received power is given by the photocurrent multiplied by the photodiode responsivity. VCC VCC LD Monitor PD Vpdr BM+ I bias 3K 10ohm 3K I mon 3K 200ohm Pmon+ RX PD I pd Pmon- BM- 3K bias circuit control circuit T Analog Monitoring Function Connections ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 6 /30/2004 V1.0 Optoway CONNECTION DIAGRAM TRSL-7385W-CXX0 *************************************************************************************************************************************************************************** P IN Symbol Notes PIN S ymbol N otes 1 VpdR Receiver power monitor. This pin must be 11 connected to a positive power supply (Vcc), preferably via a small resistor. Supplier photocurrent and maybe used to monitor receiver power. Receiver ground. 12 Receiver ground. 13 No connected No connected Receiver ground. +3.3V dc receiver power supply Signal detect. Logic 1 indicate a normal operation. Receiver Dataout Bar Receiver Dataout VccT +3.3V dc transmitter power supply 2 3 4 5 6 7 8 9 10 MS V eeR V eeR NC NC V eeR V ccR SD R D− RD+ MS VeeT T ransmitter ground. T Dis T ransmitter Disable. Connect this pin to logic “1” TD + TD − VeeT Bmon− Bmon+ PmonPmon+ to disable module. To enable module connect to logic low “0 ” T ransmitter Data In T ransmitter Data In Bar T ransmitter ground. Laser Bias Monitoring – N egative End Laser Bias Monitoring – P ositive End (Bmon+ - Bmon-) = 10 Ω X laser bias current Laser Power Monitoring -- Negative end Laser Power Monitoring -- Positive end (Pmon+ - Pmon-) = 200 Ω X m onitor photdiode current 14 15 16 17 18 19 20 Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP5 Tdis(LVTTL) BmonBmon+ PmonPmon+ 1uH 20 19 18 17 16 15 14 13 12 11 C2 100nF L1 1uH L2 TDLVPECL TD+ Z=50R MICROSTRIP6 Z=5OR VCC3.3V TX RX Vp d R Ve e RX Ve e RX NC NC Ve e RX Vc c RX SD RDRD+ P mo n + P mo n B mo n + B mo n Ve e T X T DT D+ Tdis Ve e T X Vc c T X C3 100nF C4 10uF PHY DEVICE C1 1 2 3 4 5 6 7 8 9 10 100nF C8 10uF RD+ Vcc3.3V R14 200R VCCRX(3.3V) 10nF Z=50R MICROSTRIP8 Z=5OR SD MICROSTRIP7 100R LVPECL RD- 3K Vpdr TO LVTTL STAGE Note: 1. TX input is terminated inside the module. 2. Veer and Veet are not internally connected to each other. 3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 6 /30/2004 V1.0 Optoway PACKAGE DIAGRAM Units in mm TRSL-7385W-CXX0 *************************************************************************************************************************************************************************** 1) Standard Case TRSL-7385W-CXX0 2) Extended Case TRSL-7385WE-CXX0 Note: Specifications subject to change without notice. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 6 /30/2004 V1.0