CJ5E88TYL

Mini-Com TX5e and TX6 PLUS UTP Jack Modules Part Numbers: CJ5E88T**, CJD5E88T**, CJ688TP**, CJD688TP**, KJ688TP** INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 1 PN307K T568B 2 T568A 1" (25.4mm) Wiring sequence B A {Not to scale} 3 T568B 4 1 3 ! Follow order carefully so wires overlap properly in the next step. T568B 8 T568A 10 10 8 1 3 T568B 6 T568A 2 4 2 4 5 T568A ! 7 5 6 5 ! Blue/white wire should overlap and be parallel to green wire as shown. 7 Blue/white wire should overlap and be parallel to orange wire as shown. 9 6 8 7 Ensure conductors are secure in slots before cutting flush with cap. 9 Note: Bending the cable may cause conductors to become unsecured and termination to fail. Keep cable straight. Verify conductors are visible and secured in place. “TOP” T568B  DO NOT BEND CABLE! CGJT T568A CWST For Technical Support: www.panduit.com/resources/install_maintain.asp ** Denotes color. Page 1 of 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 PN307K TERMINATION CAP REMOVAL 1 2 3 5 4 JACK MODULE INSTALLATION / REMOVAL Mini-Com style jack modules Keystone style jack modules INSTALL INSTALL REMOVE REMOVE Depress latch on module 1 2 3 2 3 2 2 1 1 Notes: 1. For specified performance, follow ANSI/NECA/BICSI-568-2006 installation guidelines. 2. Jack modules can terminate PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with insulated conductor outside diameter ranging between 0.035 inch (0.88mm) and 0.048 inch (1.2mm). 3. Jack modules may be re-terminated a minimum of 10 times. 4. For technical and performance information, consult Panduit Technical Support. As with all Wiring Accessories, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. Pin #’s T568B 8 7 6 5 4 3 2 1 1 8 T568A 8 7 6 5 4 3 2 1 7 8 4 6 5 3 2 1 E-mail: techsupport@panduit.com For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp Wiring Sequences www.panduit.com Page 2 of 2 Phone: 866-405-6654 7 8 4 6 5 3 2 1 Termination for Right Hand Lay Cable INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 2 1 PN580A T568B T568A 1" (25.4mm) Wiring sequence B A {Not to scale} 3 4 T568B 4 1 3 5 ! Follow order carefully so wires overlap properly in the next step. T568B 6 6 T568A T568A 2 3 T568B 6 1 4 2 T568A 9 9 ! 7 5 8 7 5 Orange/white wire should overlap and be parallel to blue wire as shown. 10 10 8 8 7 ! Green/white wire should overlap and be parallel to blue wire as shown. Ensure conductors are secure in slots before cutting flush with cap. Note: Bending the cable may cause conductors to become unsecured and termination to fail. Keep cable straight. Verify conductors are visible and secured in place. “TOP” T568B  DO NOT BEND CABLE! CGJT T568A CWST For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 1