CJ6X88TGRD

45° Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack Modules specifications 45° angled wire caps, when mated with compatible UTP jack modules, shall provide improved cable routing to jacks in confined spaces. Angled wire caps shall terminate 4-pair, 22 - 26 AWG, 100 ohm unshielded twisted pair cable and shall use a forward motion termination method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The wire caps shall be color-coded to designate performance category and shall include a universal label coded for T568B wiring schemes. technical information Channel and component performance^: Exceeds channel and component requirements of ANSI/TIA-568-C.2 and ISO 11801 standards for the respective Category or Class performance levels at the designated swept frequencies for that Category or Class IEC compliance^: Meets IEC 60603-7 RoHS compliance: Compliant PoE compliance^: Supports 2500 connection cycles with IEEE 802.3af / 802.3at and proposed 802.3bt type 3 and type 4 UL rated^: UL 1863 and UL 2043 Operating temperature: -10°C to 65°C (14°F to 149°F) Conductor termination range: Compatible with 22 – 26 AWG solid or stranded cable with conductor insulation diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in Depth reduction provided: Allows 55% reduction in cable routing depth compared to straight exit wire cap with both allowing proper cable bend radius for 0.275 inch (6.99 mm) diameter cable (0.500" with angled caps vs. 1.100" with straight exit caps) ^When mated to compatible UTP jack modules. key features and benefits Angled cable exit: Large diameter cable can be routed to jacks in tight spaces while maintaining proper bend radius; also can be used on multiple jacks positioned next to each other Reversible direction design: Both wire cap versions can be inserted into compatible jacks in either direction, bringing the convenience of needing only two parts to handle up, down, left, or right cable routing needs Wide compatibility: Immediate compatibility with Panduit’s most common Mini-Com® UTP jacks Economical: Angled wire caps can easily be applied to new or already installed compatible jacks to gain routing advantages without needing to purchase new jacks Uses enhanced Giga-TX Technology: Optimizes performance by eliminating conductor untwist and reduces installation time and expense Consistent termination design: Similarity in both conductor management and termination method to Panduit’s most common straight exit Mini-Com® UTP jacks; ensures minimal learning curve and fast field terminations Termination tool available: TGSJT termination tool functions for both wire cap versions and ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability applications 45° Angled Wire Caps can be used with compatible TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack Modules where ever an angled cable exit from the modular jack is desired and in confined jack mounting spaces such as in modular furniture, raceway, and wall outlets with conduit. 45° Angled Wire Caps are especially beneficial for use with Category 6A cabling which is increasingly being w w w . pa n d u it.c o m deployed in office and furniture applications, since their angled routing better accommodates the larger bundle diameter and bigger bend radius of Category 6A cable. SPECIFICATION SHEET 45° Angled Wire Caps for Mini-Com ® UTP Jack Modules Up/Down 45° Angle Caps TX6A™: CJUDCAPBU-% TX6 ™ PLUS: CJUDCAPIW-% ™ TX5e : CJUDCAPRD-% Left/Right 45° Angle Caps TX6A ™ : CJLRCAPBU-% TX6 ™PLUS: CJLRCAPIW-% ™ TX5e : CJLRCAPRD-% Compatible Mini-Com ® UTP Jack Modules TX6A™ UTP with MaTriX Technology Mini-Com ® UTP Jack Modules TX6A™: CJ6X88TG* TX6 ™ PLUS: CJ688TG* ™ TX5e : CJ5E88TG* Mini-Com ® Spring Shuttered UTP Jack Modules TX6A ™ : CJH6X88TG* TX6 ™PLUS: CJH688TG* TX5e ™ : CJH5E88TG* Tools and Accessories Jack module Termination tool: TGSJT Wire snipping tool: CWST Wire stripping tool: CJAST % = Package size (X = 10, C = 100) * To designate color, add suffix IW (Off White), EI (Electric Ivory), IG (International Gray), AW (Arctic White), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange,) BR (Brown), GD (Gold), LB (Light Blue), PK (Pink) or VL (Violet). 45° Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack Modules U p / Dow n 45° TG Wire Cap CJUDCAPBU-^, CJUDCAPIW-^, CJUDCAPRD-^ (See Installation Instruction PN610) 0.96 [24.3] 0.61 [15.4] Left/Right 45° TG W ir e Ca p CJLRCAPBU-^, CJLRCAPIW-^, CJLRCAPRD-^ (See Installation Instruction PN609) 0.63 [16.1] 0.96 [24.4] 0.63 [16.1] TG S J T Ter mination Tool (Required for terminating 45° Angled Wire Caps) Wall thickness >1mm [0.039"]. Dimensions are in inches. [Dimensions in brackets are metric.] 0.61 [15.4] 45° Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack Modules P anduit Up/Down 45° Angled W ir e Caps Spac e Sav ings in Typica l W all Outlet Applic ation Panduit 6A UTP Cable (0.275”) 1.829” Panduit TGCable Jacks (0.275”) Panduit 6A UTP 1.075” Angled reduces depth by 40% Faceplate CFP4** (0.220”) Commercial Drywall (0.625”) 45° Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com® UTP Jack Modules Panduit Left/Right 45° Angled W ir e Caps S pac e Sav ings in Typical Fur nitur e Applic ation Angled reduces depth by 34% Panduit 6A UTP Cable (0.275”) 2.149” Panduit TG Jacks 1.430” Furniture Panel (0.125”) Furniture Faceplate CFFP4** (0.400”) WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/ CANADA Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com ©2017 Panduit Corp. ALL RIGHTS RESERVED. COSP406--SA-ENG 4/2017