CJE688TGWH

Mini-Com ® TX6 ™ PLUS Corrosive Resistant UTP Jack Modules SPECIFICATION SHEET specifications Category 6/Class E, 8-position, UTP jack module shall terminate 4-pair, 22 – 26 AWG, 100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool. Polymer based gel shall protect electrical contacts and internal components by reducing the ingress of moisture and other corrosive elements such as salt, providing improved long term performance. UTP jack modules shall use a forward motion termination method to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. The termination cap shall be color-coded white to designate Category 6 performance and shall include a universal label coded for T568A and T568B wiring schemes. technical information Category 6/Class E channel performance: FCC and ANSI compliance: IEC compliance: PoE compliance: UL rated: Conductor termination range: RoHS compliancy status: Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards at swept frequencies 1 to 250 MHz Meets all applicable ANSI/TIA-968-A requirements; contacts plated with 50 microinches of gold for superior performance Meets IEC 60603-7 Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications UL 1863 approved Wire cap compatible with 22 – 26 AWG solid or stranded cable with conductor insulation diameters of 0.060 in. max and overall cable O.D. 0.200 in. to 0.330 in. Compliant key features and benefits Polymer based gel High temperature resistant material 100% performance tested Utilizes enhanced Giga-TX ™ Technology Improved termination cap Modular True strain relief Individually serialized RJ45 interface Identification Termination tools (optional) Block out device (optional) Protects electrical contacts and internal components by reducing the ingress of moisture and other corrosive elements such as salt, providing improved long term performance; operation life 75+ insertions Enables operations in environments up to 70°C; ideal for use in warm temperature environments or network hot spots Confidence that each jack module will deliver the critical electrical performance requirements Optimizes performance by eliminating conductor untwist and reduces installation time and expense Conductor retention slots simplify jack module termination UTP jack modules snap in and out of all Mini-Com ® Faceplates, Modular Patch Panels and Surface Mount Boxes for easy moves, adds and changes Controls cable bend radius for long-term installed performance Marked with quality control number for future traceability Industry standard interface provides a quick and easy plug and play connection to RJ45 patch cords; backwards compatible Can be clearly identified with optional labels and icons for port identification EGJT termination tool ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability; TGJT termination tool ideal for high volume installations Provides a simple and secure method to control access to data ports while not in use applications Mini-Com® TX6™ PLUS Corrosive Resistant UTP Jack Modules are a component of the TX6™ PLUS UTP Copper Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 250 MHz. With performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E Edition 2.1 standards, this system will support the following applications: w w w. p a n d u i t . c o m • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) • 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM • Token Ring 4/16 • Digital video and broadband/baseband analog video • Voice over Internet Protocol (VoIP) TX6 ™ PLUS UTP Copper Cabling System Mini-Com ® TX6 ™ PLUS Corrosive Resistant UTP Jack Module Jack module: CJE688TGIW* TX6500 ™ UTP Copper Cable Plenum: PUP6504** Riser: PUR6504** TX6000 ™ UTP Copper Cable Plenum: PUP6004** Riser: PUR6004** LSZH: PUL6004** CM: PUC6004*** TX6 ™ PLUS UTP Patch Cords CM (Foot lengths): UTPSP^Y CM (Meter lengths): UTPSP^^MY LSZH (Meter lengths): UTPSPL^^MY Mini-Com ® Angled Modular Patch Panels 24-port, 1 RU: CPPLA24WBLY 48-port, 2 RU: CPPLA48WBLY Mini-Com ® Flat Modular Patch Panels 24-port, 1 RU: CPPL24WBLY 48-port, 2 RU: CPPL48WBLY For additional modular and punchdown patch panels, visit www.panduit.com. GP6 ™ PLUS 110 Punchdown System Visit www.panduit.com for complete system information. Tools and Accessories Jack module termination tools: EGJT or TGJT Wire snipping tool: CWST Wire stripping tool: CJAST Clear dust cap: MDC-C Block out device: PSL-DCJB-^^^ Phone icons: CIPIW-C‡ Data icons: CIDIW-C‡ *To designate color other that IW (Off White), replace IW suffix with WH (White), BL (Black), RD (Red), or BU (Blue). **To designate color, add suffix BU (Blue) or WH (White). For additional cable colors, contact customer service. ^For lengths 1 to 20 feet (one foot increments) and 25, 30, 35, 40 feet, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet). For example, the part number for a blue 15-foot patch cord is UTPSP15BUY. ^^For lengths 1 to 10 meters (one meter increments) and 2.5, 15, 20, 25, 30, 35, 40 meters, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet). For example, the part number for a blue 15-meter patch cord is UTPSP15MBUY. ^^^To To designate color other than Red, add suffix BL (Black), BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW (Off White), or IG (International Gray) at the end of the part number. 10/package. ‡To designate color other than IW (Off White), replace IW with EI (Electric Ivory), IG (International Gray), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet) in the part number. 100/package. Contact customer service for bulk packaged and/or keyed jack modules and patch cords. Mini-Com ® TX6 ™ PLUS Corrosive Resistant UTP Jack Modules test results Mechanical Test Normal Force Vibration Shock Test Method – IEC 512-6d Measurement Load (grams) Circuit Resistance (mOhms) Typical Test Results > 100 < 40 IEC 512-6c Contact Disturbance (microsecond) 20 Test Method IEC 512-2a IEC 512-4a Measurement Resistance (mOhms) 1000 V, 1 minute Typical Test Results < 20 Passed IEC 512-3a Resistance (MOhms) > 500 Test Method Measurement IEC 512-9b Circuit Resistance (mOhms) Typical Test Results < 40 Humidity IEC 512-11c Circuit Resistance (mOhms) < 40 Thermal Shock IEC 512-11d Circuit Resistance (mOhms) < 40 Climatic Sequence IEC 512-11a Circuit Resistance (mOhms) < 40 IEC 512-11g Circuit Resistance (mOhms) < 40 TR-NWT-001334 Test 5.11 Circuit Resistance (mOhms) >10 Durability Mating/Unmating Termination Cycles Electrical Test Low Level Circuit Resistance Dielectric Withstand Voltage Insulation Resistance Environmental Temperature Life Flowing Mixed Gas Corrosion Salt Fog Test Strain Relief Clip Wire Cap Module Housing .71 [18.06] .62 [15.87] 1.50 [38.15] Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 and reference COSP175 ©2011 Panduit Corp. ALL RIGHTS RESERVED. WW-COSP175 5/2011