ES1006FL_R1_00001

ES1001FL~ES1006FL SMALL SURFACE MOUNT SUPER FAST DIODES 1 Ampere VOLTAGE 100 to 600 Volt CURRENT SOD-123FL Unit：inch(mm) For surface mounted applications in order to optimize board space Ideal for automated placement Glass passivated High temperature soldering : 260oC / 10 seconds at terminals Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard 0.075(1.90) 0.067(1.70) • • • • • • 0.115(2.90) 0.106(2.70) MECHANICAL DATA 0.044(1.10) 0.031(0.80) FEATURES 0.008(0.20) 0.004(0.10) 0.145(3.70) 0.137(3.50) • Case: SOD-123FL, Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 0.044(1.10) 0.035(0.90) 0.030(0.75) 0.017(0.45) • Weight: 0.0006 ounces, 0.0173 grams • Polarity: Color band denotes cathode end 1 2 Cathode Anode ABSOLUTE RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Test condition Symbol ES1001FL ES1002FL ES1004FL ES1006FL Units - E1B E1D E1G E1J - Maximum repetitve peak reverse voltage VRRM 100 200 400 600 V Maximum RMS voltage VRMS 70 140 280 420 V Maximum DC blocking voltage VDC 100 200 400 600 V Marking Code Maximum average forward current TL=120OC I F(AV) 1 A Peak forward surge current 8.3ms single half sine-wave TL=25OC I FSM 30 A 1.0A VF Maximum DC reverse current at rated DC blocking voltage TJ=25OC TJ=100OC IR 0.5 10 μA Reverse recovery time I F=0.5A I R=1A I RR=0.25A TRR 35 ns Typical capacitance 4V,1MHz CJ 7 pF Maximum instantaneous forward voltage 0.95 1.25 1.7 V ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Typical Thermal Resistane Operating junction and storage temperature range Symbol (Notes 1) (Notes 2) ES1001FL ES1002FL ES1004FL R θJA R θJC 200 30 TJ ,TSTG -55 to +150 ES1006FL Units C/W O C O NOTES : 1.Mounted on a FR4 PCB, single-sided copper, mini pad. 2.Mounted on a FR4 PCB, single-sided copper, with 10cm*10cm copper pad area. June 14,2017­REV.09 PAGE . 1 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 1 TJ = 125°C TJ = 75°C 0.01 100V~200V TJ = 25°C 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics 1 1 10 100 VR, Reverse Bias Voltage (V) 1 TJ = 150°C TJ = 125°C 0.1 TJ = 75°C 0.01 0.001 400V TJ = 25°C 10 20 30 40 50 60 70 80 90 100 Fig.4 Typical Reverse Characteristics 10 TJ = 150°C 10 1 TJ = 125°C 0.1 TJ = 75°C 0.01 600V TJ = 25°C 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Reverse Characteristics June 14,2017­REV.09 IF, Forward Current (A) IR, Reverse Current (nA) 600V Percent of Rated Peak Reverse Voltage (%) 100 0.001 400V 10 10 TJ = 150°C 0.1 100V~200V Fig.2 Typical Junction Capacitance IR, Reverse Current (mA) IR, Reverse Current (mA) 10 100 CJ, Junction Capacitance (pF) IF, Forward Current (A) ES1001FL~ES1006FL 1 0.1 TJ = 125°C TJ = 75°C TJ = 150°C TJ = 25°C 0.01 100V~200V 0.001 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics PAGE . 2 ES1001FL~ES1006FL 10 IF, Forward Current (A) IF, Forward Current (A) 10 TJ = 125°C 1 TJ = 150°C 0.1 TJ = 75°C TJ = 25°C 0.01 400V 0.001 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics June 14,2017­REV.09 TJ = 125°C 1 TJ = 150°C 0.1 TJ = 75°C 0.01 TJ = 25°C 600V 0.001 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 VF, Forward Voltage (V) Fig.8 Typical Forward Characteristics PAGE . 3 ES1001FL~ES1006FL MOUNTING PAD LAYOUT SOD-123FL Unit：inch(mm) 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 14,2017­REV.09 PAGE . 4 ES1001FL~ES1006FL Part No_packing code_Version ES1001FL_R1_00001 ES1001FL_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 14,2017­REV.09 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 ES1001FL~ES1006FL Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 14,2017­REV.09 PAGE . 6