RS1006FL_R1_00001

RS1001FL~RS1010FL SMALL SURFACE MOUNT FAST DIODES VOLTAGE 100 to 1000 Volt CURRENT SOD-123FL 1 Ampere Unit：inch(mm) 0.075(1.90) 0.067(1.70) • For surface mounted applications in order to optimize board space • Ideal for automated placement • Glass Passivated Chip Junction • High temperature soldering : 260OC / 10 seconds at terminals • Ultra thin profile package for space constrained utilization • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.115(2.90) 0.106(2.70) MECHANICAL DATA 0.145(3.70) 0.137(3.50) • Case : JEDEC SOD-123FL, Molded plastic over passivated junction • Terminals : Solderable per MIL-STD-750, Method 2026 0.044(1.10) 0.031(0.80) FEATURES 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.004(0.10) 0.030(0.75) 0.017(0.45) • Standard Packaging : 8mm tape (EIA-481) • Apporx. Weight : 0.0006 ounces, 0.0173 grams • Polarity : Color band cathode 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Test condition Symbol RS1001FL RS1002FL RS1004FL RS1006FL RS1008FL RS1010FL Units - R1B R1D R1G R1J R1K R1M - Maximum repetitve peak reverse voltage VRRM 100 200 400 600 800 1000 V Maximum rms voltage VRMS 70 140 280 420 560 700 V Maximum dc blocking voltage VDC 100 200 400 600 800 1000 V Maximum average forward rectified current Derate above TC=110OC I Rating Marking code Maximum instantaneous forward voltage 0.7A 1A Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load F(AV) VF I FSM Maximum dc reverse current at rated dc blocking voltage TJ=25OC TJ=125OC I Typical capacitance 4V,1MHz CJ Reverse recovery time I F=0.5A I R=-1A I rr=-0.25A t Typical thermal resistance junction to ambient (Note1) Operating junction and storage temperature range R rr 1 A 1.15 1.3 V 30 A 1 50 μA 9 pF 150 250 RΘJA 200 TJ ,TSTG -55 to +150 500 nS O C/W O C Note: 1. Mounted on a FR4 PCB, single-sided copper, mini pad. June 13,2017­REV.07 PAGE . 1 RS1001FL~RS1010FL 10 CJ,Junction Capacitance (pF) 15 I F[A] 1 0.1 0.01 O Typical@25 C 0.001 0 13 10 8 5 3 0 0.1 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 1 Fig.1-TYPICAL FORWARD CHARACTERISTICS 1 0.75 0.5 Mounted on 5cm x 1.5cm PCB Board 0.25 0 0 25 50 75 100 125 150 T C, Case Temperature [ OC] Fig.3-FORWARD CURRENT DERATING CURVE June 13,2017­REV.07 Fig.2-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT, AMPERES pk (HALF-SING WAVE) I F, Forward Current [A] 1.25 100 VR, Reverse Bias Voltage (V) V F[V] 1.5 10 35 30 25 20 15 10 5 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig.4-MAXIMUM NON-REPEITIVE SURGE CURRENT PAGE . 2 RS1001FL~RS1010FL MOUNTING PAD LAYOUT SOD-123FL Unit：inch(mm) 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 13,2017­REV.07 PAGE . 3 RS1001FL~RS1010FL Part No_packing code_Version RS1001FL_R1_00001 RS1001FL_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 13,2017­REV.07 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 RS1001FL~RS1010FL Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 13,2017­REV.07 PAGE . 5