1436563

https://www.phoenixcontact.com/us/products/1436563 Flush-type connector - SACC-DSIV-FS-5CON-L90 SCO - 1436563 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with polarity protection, with angled solder connection     Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 12.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Status display No Overvoltage category II Pollution degree 3 Connection method Solder pins Mounting type Rear mounting M12 x 1 With flat nut 10/19/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1436563 Flush-type connector - SACC-DSIV-FS-5CON-L90 SCO - 1436563 Technical data Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized 10/19/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1436563 Flush-type connector - SACC-DSIV-FS-5CON-L90 SCO - 1436563 Approvals Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V Drawings Schematic diagram 3 Drilling diagram 4 15 3,54 +0 1 9,8 2 5,8 8,03 11,57 Ø 2, 8 +0 Pin assignment M12 socket, 5-pos., A-coded, socket side view ,0 5 ø2 ,0 5 2 ,0 5 5 ±0,05 5xØ1,2 Drilling diagram 10/19/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1436563 Flush-type connector - SACC-DSIV-FS-5CON-L90 SCO - 1436563 Dimensional drawing Dimensional drawing 1 4 5 2 3 15 Ø16,4 19,6 19,6 8,5 26,29 14 11,5 13,5 M12 flush-type connector, socket, side view M12 flush-type connector, socket, front view Dimensional drawing Dimensional drawing 15,9 15,9 8,5 26,29 1 4 5 2 3 19,2 Ø1 M12 flush-type connector, socket, contact carrier, side view Dimensional drawing Dimensional drawing ≤1,5 Ø ±0 ,2 12 1 M12 flush-type connector, socket, contact carrier, front view ±0,05 5 ,0 5,3 Ø7 Ø1 10,6 ±0,05 2 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when Housing cutout for M12 fastening thread, mounting panel with feed-through using with assembled O-ring! hole (alternative with surface as protection against rotation) - Avoid radial forces! 10/19/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1436563 Flush-type connector - SACC-DSIV-FS-5CON-L90 SCO - 1436563 Dimensional drawing 20 2 ≤1,5 12,5 9,2 10 Locked area on the PCB Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/19/2015   Page 5 / 5