https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator box, application: Standard, connection method: M8 socket Metal, number of slots: 10,
number of positions: 3, coding: A - standard, slot assignment: single, status display: yes, pnp; master cable
connection: M12 plug connection 90°, shielding: no
Your advantages
Safety in the field, thanks to molded housing and high degree of protection
Flexible, distributed bundling of signals in one master cable
Convenient: increased machine availability thanks to quick and easy diagnostics
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356485678
Weight per Piece (excluding packing)
154.000 g
Custom tariff number
85366990
Country of origin
Poland
Technical data
General
Rated voltage
24 V DC
Max. operating voltage Umax
30 V DC
Current carrying capacity per I/O signal
1.5 A
Current carrying capacity per slot
1.5 A
Total rated current
1.5 A
Number of positions
3
Number of slots
10
Flammability rating according to UL 94
V0
Sensor/actuator connection system
M8 socket
Note
NOTE: Observe the permissible bending radii when laying conductors,
since the degree of protection may be put in jeopardy if the bending
01/03/2020 Page 1 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Technical data
General
forces are too high. Alleviate mechanical loads upstream of the
connector, e.g. by using cable ties.
Unused slots are to be sealed off prior to commissioning. Suitable
sealing elements are to be found under "Accessories".
Ambient conditions
Degree of protection
IP65
IP67
Ambient temperature (operation)
-30 °C ... 80 °C
Local diagnostics function
Local diagnostics
Supply voltage per module Green LED
Status display I/O Yellow LED
Master cable data/connection data
Connection method
M12 plug connection
Tightening torque - master cable - plug connection
0.4 Nm
Tightening torque slot sensor/actuator cable
0.2 Nm
Insulation material
Housing material
PBT
Material of the moulding mass
PUR
Contact material
CuSn
Contact surface material
Ni/Au
Contact carrier material
PA
Material of contact, master cable side
CU alloy
Material of contact surface, master cable side
Gold-plated
Material of threaded sleeve
Cu alloy
Material of threaded sleeve surface
Nickel-plated
O-ring material
NBR
Pin assignment
Slot/position = Wire color or connection
1 / 4 (A) = 3
2 / 4 (A) = 4
3 / 4 (A) = 6
4 / 4 (A) = 8
5 / 4 (A) = 5
6 / 4 (A) = 9
7 / 4 (A) = 7
8 / 4 (A) = 10
9 / 4 (A) = 11
10 / 4 (A) = 12
1-10 / 1 (+24 V) = 1
1-10 / 3 (0 V) = 2
01/03/2020 Page 2 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Technical data
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Standard designation
M8 connector
Standards/regulations
IEC 61076-2-104
Connection in acc. with standard
CUL
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
01/03/2020 Page 3 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Schematic diagram
M12 plug connection pin, 12-pos.
01/03/2020 Page 4 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Dimensional drawing
Circuit diagram
Further information can be found in the connection assignment section
01/03/2020 Page 5 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Schematic diagram
M8 slot, socket, 3-pos.
Classifications
eCl@ss
eCl@ss 4.0
27140800
eCl@ss 4.1
27140800
eCl@ss 5.0
27143400
eCl@ss 5.1
27250300
eCl@ss 6.0
27279200
eCl@ss 7.0
27279219
eCl@ss 8.0
27279219
eCl@ss 9.0
27440108
ETIM
ETIM 4.0
EC002585
01/03/2020 Page 6 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Classifications
ETIM
ETIM 5.0
EC002585
ETIM 6.0
EC002585
ETIM 7.0
EC002585
UNSPSC
UNSPSC 6.01
31261501
UNSPSC 7.0901
31261501
UNSPSC 11
31261501
UNSPSC 12.01
31261501
UNSPSC 13.2
31251501
UNSPSC 19.0
31251501
UNSPSC 20.0
31251501
UNSPSC 21.0
31251501
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal current IN
1.5 A
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal current IN
1.5 A
EAC
FILE E 118976
FILE E 118976
RU CDE.BL08.B.00286
01/03/2020 Page 7 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Approvals
cULus Recognized
Accessories
Accessories
Labeled terminal marker
Marker for terminal blocks - UC-TMF 10 CUS - 0824662
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of
individual labels: 48
Marker for terminal blocks - UCT-TMF 10 CUS - 0829679
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm, Number of
individual labels: 36
Marker for terminal blocks - UC-TMF 10 YE CUS - 0824668
Marker for terminal blocks, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting
type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of
individual labels: 48
Marker for terminal blocks - UCT-TMF 10 YE CUS - 0829682
Marker for terminal blocks, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting
type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm, Number of
individual labels: 36
Plug for cable screw gland
01/03/2020 Page 8 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Accessories
Screw plug - PROT-M8 - 1682540
An M8 screw plug for the unoccupied M8 sockets of the sensor/actuator cable, boxes and flush-type connectors
Protective cap
Sealing cap - PROT-M12 FS - 1560251
M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
Screwdriver tools
Tool - SAC BIT M8-D10 - 1208461
Nut for assembling M8 connectors with longitudinal knurl and a knurl diameter of 10 mm, for 4 mm hexagonal drive
Tool - SACC BIT M8-D12 - 1208474
Nut for assembling M8 connectors with longitudinal knurl and a knurl diameter of 12 mm, for 4 mm hexagonal drive
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
01/03/2020 Page 9 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Accessories
Tool - SAC BIT M12-D15 - 1208432
Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl
diameter of 15 mm, for 4 mm hexagonal drive
Sensor/actuator cable
Sensor/actuator cable - SAC-12P- 5,0-PUR/FS SCO - 1430637
Sensor/actuator cable, 12-position, PUR halogen-free, black RAL 9005, free cable end, on Socket straight M12
SPEEDCON, A-coded, cable length: 5 m
Sensor/actuator cable - SAC-12P-10,0-PUR/FS SCO - 1430640
Sensor/actuator cable, 12-position, PUR halogen-free, black RAL 9005, free cable end, on Socket straight M12
SPEEDCON, A-coded, cable length: 10 m
Sensor/actuator cable - SAC-12P- 5,0-PUR/FR SCO - 1430679
Sensor/actuator cable, 12-position, PUR halogen-free, black RAL 9005, free cable end, on Socket angled M12
SPEEDCON, A-coded, cable length: 5 m
Sensor/actuator cable - SAC-12P-10,0-PUR/FR SCO - 1430682
Sensor/actuator cable, 12-position, PUR halogen-free, black RAL 9005, free cable end, on Socket angled M12
SPEEDCON, A-coded, cable length: 10 m
Terminal marking
01/03/2020 Page 10 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Accessories
Marker for terminal blocks - UC-TMF 10 - 0818124
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual labels: 48
Marker for terminal blocks - UCT-TMF 10 - 0829204
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field
size: 9.4 x 4.7 mm, Number of individual labels: 36
Marker for terminal blocks - UC-TMF 10 YE - 0818687
Marker for terminal blocks, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual labels: 48
Marker for terminal blocks - UCT-TMF 10 YE - 0829207
Marker for terminal blocks, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field
size: 9.4 x 4.7 mm, Number of individual labels: 36
Torque tool
Torque screwdriver - TSD 02 SAC - 1208487
Torque screwdriver, with preset torque of 0.2 Nm and 4 mm hexagonal drive for M8 connectors
01/03/2020 Page 11 / 12
https://www.phoenixcontact.com/gb/products/1434853
Sensor/actuator box - SACB-10/3-L-M12-M8 - 1434853
Accessories
Torque screwdriver - TSD 04 SAC - 1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
01/03/2020 Page 12 / 12