FM120C

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION FM120C THRU FM160C SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 60 Volts CURRENT 1.0 Ampere FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO2-214AB MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram 0.125 (3.17) 0.115 (2.92) 0.280 (7.11) 0.260 (6.60) 0.245 (6.22) 0.220 (5.59) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.320 (8.13) 0.305 (7.75) 0.012 (0.305) 0.006 (0.152) 0.008 (0.203) 0.004 (0.102) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 2) Operating Temperature Range Storage Temperature Range SYMBOL VRRM VRMS VDC IO I FSM Rθ JA CJ TJ T STG -65 to + 125 -65 to + 150 FM120C 20 14 20 FM130C 30 21 30 FM140C 40 28 40 1.0 40 50 110 -65 to + 150 FM150C 50 35 50 FM160C 60 42 60 UNITS Volts Volts Volts Amps Amps 0 C/ W pF 0 0 C C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @T A = 2 5 o C @T A = 1 00 o C SYMBOL VF IR FM120C FM130C .55 1.0 10 FM140C FM150C .70 FM160C UNITS Volts mAmps mAmps 2002-6 NOTES : 1. Thermal Resistance (Junction to Ambient): Vertical PC Board Mounting, 0.5” (12.7mm) Lead Length. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. RATING AND CHARACTERISTIC CURVES ( FM120C THRU FM160C ) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVREAGE FORWARD CURRENT, (A) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 10 1.0 .75 .50 Single Half Wave 60HZ Resistive or Inductive Load FM 15 0C -FM -FM 14 0C 16 0C FM 12 0C 1.0 .25 P.C.B Mounted on 0.4X0.4"(10X10mm) copper pad areas FM120C FM130C FM140C FM150C FM160C TJ = 25 Pulse Width = 300uS 1% Duty Cycle 0 0 25 50 75 100 125 150 LEAD TEMPERATURE, ( ) 175 .1 .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 3B - TYPICAL REVERSE CHARACTERISTICS FIG. 3A - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (mA) FM120C-FM140C INSTANTANEOUS REVERSE CURRENT (mA) 100 100 FM150C-FM160C 10 TJ = 125 10 1.0 TJ = 75 1.0 TJ = 150 TJ = 125 0.1 0.1 TJ = 75 .01 TJ = 25 .01 TJ = 25 .001 0 20 40 60 80 100 120 140 .001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, (pF) FIG. 4 - TYPICAL JUNCTION CAPACITANCE 400 200 100 80 60 40 20 10 .1 .4 1.0 4 10 REVERSE VOLTAGE, (V) 40 80 TJ = 25 PEAK FORWARD SURGE CURRENT, (A) 50 40 8.3ms Single Half Sine-Wave 30 20 10 0 1 JEDEC Method 2 4 6 810 20 40 80100 NUMBER OF CYCLES AT 60Hz RECTRON Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121 MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 REF Dimensions in inches and (millimeters) RECTRON