IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
3.3V CMOS 16-BIT
BUFFER/DRIVER
WITH 3-STATE OUTPUTS
AND 5 VOLT TOLERANT I/O
IDT74LVC162244A
DESCRIPTION:
FEATURES:
The LVC162244A 16-bit buffer/driver is built using advanced dual metal
CMOS technology. The LVC162244A is designed specifically to improve
both the performance and density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and transmitters. The device can be
used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. This device
provides true outputs and symmetrical active-low output-enable (OE)
inputs.
All pins of this 16-bit buffer/driver can be driven from either 3.3V or 5V
devices. This feature allows the use of the device as a translator in a mixed
3.3V/5V supply system.
The LVC162244A has series resistors in the device output structure
which will significantly reduce line noise when used with light loads. This
driver has been developed to drive ±12mA at the designated threshold
levels.
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
μ W typ. static)
• CMOS power levels (0.4μ
• All inputs, outputs, and I/O are 5V tolerant
• Available in SSOP and TSSOP packages
DRIVE FEATURES:
• Balanced Output Drivers: ±12mA
• Low switching noise
APPLICATIONS:
• 5V and 3.3V mixed voltage systems
• Data communication and telecommunication systems
FUNCTIONAL BLOCK DIAGRAM
1OE
1
1A1
47
2
1A2
46
3
1A3
44
5
43
6
1A4
3OE
25
1Y1
3A1
36
13
3Y1
1Y2
3A2
35
14
3Y2
1Y3
3A3
33
16
1Y4
3A4
32
17
4OE
24
30
19
29
20
2OE
48
2A1
41
8
2Y1
4A1
2A2
40
9
2Y2
4A2
2A3
38
11
2Y3
4A3
27
22
2A4
37
12
2Y4
4A4
26
23
3Y3
3Y4
4Y1
4Y2
4Y3
4Y4
IDT and the IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
JULY 2015
1
© 2015 Integrated Device Technology, Inc.
DSC-4729/5
IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS(1)
PIN CONFIGURATION
Symbol
Description
Max
Unit
VTERM(2)
Terminal Voltage with Respect to GND
–0.5 to +6.5
V
VTERM(3)
Terminal Voltage with Respect to GND
–0.5 to +6.5
V
1OE
1
48
2OE
TSTG
Storage Temperature
–65 to +150
°C
1Y1
2
47
1A1
IOUT
DC Output Current
–50 to +50
mA
1Y2
3
46
1A2
IIK
IOK
Continuous Clamp Current,
VI < 0 or VO < 0
–50
mA
GND
4
45
GND
mA
5
44
Continuous Current through each
VCC or GND
±100
1Y3
ICC
ISS
1A3
1Y4
6
43
1A4
VCC
7
42
VCC
2Y1
8
41
2A1
2Y2
9
40
GND
10
39
GND
2Y3
11
38
2A3
2Y4
12
37
2A4
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC.
2A2
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Parameter(1)
Symbol
Conditions
Typ.
Max.
Unit
CIN
Input Capacitance
VIN = 0V
4.5
6
pF
COUT
Output Capacitance
VOUT = 0V
6.5
8
pF
CI/O
I/O Port Capacitance
VIN = 0V
6.5
8
pF
3Y1
13
36
3Y2
14
35
3A2
GND
15
34
3Y3
16
33
GND
3A3
3Y4
17
32
3A4
VCC
18
31
VCC
Pin Names
4Y1
19
30
4A1
xOE
3-State Output Enable Inputs (Active LOW)
xAx
Data Inputs
xYx
3-State Outputs
3A1
4Y2
20
29
4A2
GND
21
28
GND
4Y3
22
27
4A3
4Y4
23
26
4A4
4OE
24
25
3OE
NOTE:
1. As applicable to the device type.
PIN DESCRIPTION
Description
FUNCTION TABLE (EACH 4-BIT BUFFER)(1)
Inputs
SSOP / TSSOP
TOP VIEW
xOE
xAx
xYx
L
H
H
L
L
L
H
X
Z
NOTE:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High-Impedance
2
Outputs
IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Operating Condition: TA = –40°C to +85°C
Symbol
VIH
VIL
Min.
Typ.(1)
Max.
Unit
VCC = 2.3V to 2.7V
1.7
—
—
V
VCC = 2.7V to 3.6V
2
—
—
VCC = 2.3V to 2.7V
—
—
0.7
VCC = 2.7V to 3.6V
—
—
0.8
Parameter
Input HIGH Voltage Level
Input LOW Voltage Level
Test Conditions
V
Input Leakage Current
VCC = 3.6V
VI = 0 to 5.5V
—
—
±5
μA
IOZH
High Impedance Output Current
VCC = 3.6V
VO = 0 to 5.5V
—
—
±10
μA
IOZL
(3-State Output pins)
IOFF
Input/Output Power Off Leakage
VCC = 0V, VIN or VO ≤ 5.5V
—
—
±50
μA
VIK
Clamp Diode Voltage
VCC = 2.3V, IIN = –18mA
—
–0.7
–1.2
V
VH
ICCL
ICCH
ICCZ
ΔICC
Input Hysteresis
Quiescent Power Supply Current
VCC = 3.3V
VCC = 3.6V
VIN = GND or VCC
—
—
100
—
—
10
mV
μA
3.6 ≤ VIN ≤ 5.5V(2)
One input at VCC - 0.6V, other inputs at VCC or GND
—
—
—
—
10
500
μA
IIH
IIL
Quiescent Power Supply Current
Variation
NOTES:
1. Typical values are at VCC = 3.3V, +25°C ambient.
2. This applies in the disabled state only.
OUTPUT DRIVE CHARACTERISTICS
Symbol
VOH
Test Conditions(1)
Parameter
Output HIGH Voltage
Unit
V
IOH = – 0.1mA
VCC – 0.2
—
VCC = 2.3V
IOH = – 4mA
1.9
—
IOH = – 6mA
1.7
—
IOH = – 4mA
2.2
—
IOH = – 8mA
2
—
IOH = – 6mA
2.4
—
IOH = – 12mA
2
—
VCC = 2.3V to 3.6V
IOL = 0.1mA
—
0.2
VCC = 2.3V
IOL = 4mA
—
0.4
IOL = 6mA
—
0.55
IOL = 4mA
—
0.4
IOL = 8mA
—
0.6
IOL = 6mA
—
0.55
IOL = 12mA
—
0.8
VCC = 3V
Output LOW Voltage
Max.
VCC = 2.3V to 3.6V
VCC = 2.7V
VOL
Min.
VCC = 2.7V
VCC = 3V
V
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
3
IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
OPERATING CHARACTERISTICS, TA = 25°C
Symbol
Parameter
CPD
Power Dissipation Capacitance per Buffer/Driver Outputs enabled
CPD
Power Dissipation Capacitance per Buffer/Driver Outputs disabled
Test Conditions
Typical
Unit
CL = 0pF, f = 10Mhz
35
pF
4
SWITCHING CHARACTERISTICS(1)
VCC = 2.7V
Symbol
VCC = 3.3V ± 0.3V
Parameter
Min.
Max.
Min.
Max.
Unit
tPLH
Propagation Delay
—
5.6
1.1
4.4
ns
tPHL
xAx to xYx
tPZH
Output Enable Time
—
6.9
1
5.5
ns
tPZL
xOE to xYx
tPHZ
Output Disable Time
—
6.8
1.8
6.3
ns
tPLZ
xOE to xYx
—
—
—
500
ps
tSK(o)
Output Skew(2)
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.
4
IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS
TEST CONDITIONS
Symbol
VCC(1)= 3.3V±0.3V VCC(1)= 2.7V
VCC(2)= 2.5V±0.2V
Unit
VLOAD
6
6
2 x Vcc
V
VIH
2.7
2.7
Vcc
V
VT
1.5
1.5
Vcc / 2
V
VLZ
300
300
150
mV
VHZ
300
300
150
mV
CL
50
50
30
pF
Pulse (1, 2)
Generator
VIN
DISABLE
tPZL
OUTPUT
SWITCH
NORMALLY CLOSED
LOW
tPZH
OUTPUT SWITCH
NORMALLY
OPEN
HIGH
500
CL
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
Switch
VLOAD
TIMING
INPUT
Disable High
Enable High
GND
ASYNCHRONOUS
CONTROL
All Other Tests
Open
SYNCHRONOUS
CONTROL
tSK (x)
tPLH2
VOH
VT
VOL
tH
tREM
tSU
tH
LOW-HIGH-LOW
PULSE
VT
tW
HIGH-LOW-HIGH
PULSE
VT
LVC Link
tPHL2
Pulse Width
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
Output Skew - tSK(X)
tSU
VIH
VT
0V
VIH
VT
0V
VIH
VT
0V
VIH
VT
0V
Set-up, Hold, and Release Times
VOH
VT
VOL
OUTPUT 2
VOH
VOH-VHZ
0V
VT
0V
LVC Link
VIH
VT
0V
tSK (x)
tPHZ
Enable and Disable Times
DATA
INPUT
tPHL1
VLOAD/2
VOL+VLZ
VOL
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
SWITCH POSITION
Open Drain
Disable Low
Enable Low
tPLZ
VLOAD/2
VT
LVC Link
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
Test
VIH
VT
0V
CONTROL
INPUT
Test Circuit for All Outputs
OUTPUT 1
VIH
VT
0V
ENABLE
GND
VOUT
tPLH1
tPHL
Propagation Delay
LVC Link
INPUT
tPLH
LVC Link
D.U.T.
RT
tPHL
OPPOSITE PHASE
INPUT TRANSITION
Open
500
tPLH
OUTPUT
VLOAD
VCC
VIH
VT
0V
VOH
VT
VOL
SAME PHASE
INPUT TRANSITION
LVC Link
NOTES:
1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs.
2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
5
IDT74LVC162244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
LVC
X
XX
Bus-Hold
Temp. Range
XX
Family
X
XX
XXXX
Device Type Package
Blank Tube or Tray
8
Tape and Reel
PVG
PAG
Shrink Small Outline Package - Green
Thin Shrink Small Outline Package - Green
244A
16-Bit Buffer/Driver with 3-State Outputs
162
Double-Density with Resistors, ±12mA
Blank No Bus-hold
74
-40°C to +85°C
DATASHEET DOCUMENT HISTORY
07/28/2015
Pg. 1,2,6
Updated the ordering information by removing PF, PFG, non RoHS parts and adding Tape and Reel information.
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
6
for Tech Support:
logichelp@idt.com
IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
Corporate Headquarters
Contact Information
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
© 2020 Renesas Electronics Corporation. All rights reserved.