EL5292ACY

ESIG WD E ® N FOR 63 DED 0, EL52 N E OMM L526 R EC SEE E T Data Sheet O N NS Dual 600MHz Current Feedback Amplifier with Enable The EL5292 and EL5292A represent dual current feedback amplifiers with a very high bandwidth of 600MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 6mA per amplifier and the ability to run from a single supply voltage from 5V to 10V, these amplifiers are also ideal for hand held, portable or battery powered equipment. EL5292, EL5292A June 28, 2007 FN7192.1 Features • 600MHz -3dB bandwidth • 6mA supply current (per amplifier) • Single and dual supply operation, from 5V to 10V • Fast enable/disable (EL5292A only) • Single (EL5192) and triple (EL5392) available • High speed, 1GHz product available (EL5191) • Low power, 4mA, 300MHz product available (EL5193, EL5293, and EL5393) The EL5292A also incorporates an enable and disable function to reduce the supply current to 100µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier. Applications The EL5292 is offered in the industry-standard 8 Ld SOIC package and the space-saving 8 Ld MSOP package. The EL5292A is available in a 10 Ld MSOP package and all operate over the industrial temperature range of -40°C to +85°C. • RGB amplifiers • Video amplifiers • Cable drivers • Test equipment • Instrumentation • Current to voltage converters Pinouts Ordering Information EL5292 (8 LD SOIC) TOP VIEW OUTA 1 INA- 2 + INA+ 3 + VS- 4 PART NUMBER PKG. DWG. # EL5292CS 5292CS 8 Ld SOIC MDP0027 7 OUTB EL5292CS-T7* 5292CS 8 Ld SOIC MDP0027 6 INB- EL5292CS-T13* 5292CS 8 Ld SOIC MDP0027 EL5292ACY T 10 Ld MSOP MDP0043 EL5292ACY-T7* T 10 Ld MSOP MDP0043 EL5292ACY-T13* T 10 Ld MSOP MDP0043 5 INB+ *“-T7” or “-T13” suffix is for tape and reel. Please refer to TB347 for details on reel specifications. 10 INA- INA+ 1 + 9 OUTA 8 VS+ VS- 3 CEB 4 PACKAGE 8 VS+ EL5292A (10 LD MSOP) TOP VIEW CEA 2 PART MARKING + - 7 OUTB 6 INB- INB+ 5 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2004, 2007. All Rights Reserved Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL5292, EL5292A Absolute Maximum Ratings (TA = +25°C) Thermal Information Supply Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . . . 11V Pin Voltages . . . . . . . . . . . . . . . . . . . . . . . . . VS- -0.5V to VS+ +0.5V Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C Operating Temperature . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. Electrical Specifications PARAMETER VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. DESCRIPTION CONDITIONS MIN (Note 2) TYP MAX (Note 2) UNIT AC PERFORMACE BW -3dB Bandwidth AV = +1 600 MHz AV = +2 300 MHz 25 MHz 2300 V/µs BW1 0.1dB Bandwidth SR Slew Rate VO = -2.5V to +2.5V, AV = +2 tS 0.1% Settling Time VOUT = -2.5V to +2.5V, AV = -1 9 ns CS Channel Separation f = 5MHz 60 dB eN Input Voltage Noise 4.1 nV/√Hz iN- IN- Input Current Noise 20 pA/√Hz iN+ IN+ Input Current Noise 50 pA/√Hz dG Differential Gain Error (Note 1) AV = +2 0.015 % dP Differential Phase Error (Note 1) AV = +2 0.04 ° 2000 DC PERFORMANCE VOS Offset Voltage TCVOS Input Offset Voltage Temperature Coefficient Measured from TMIN to TMAX ROL Transimpediance -10 1 10 mV 5 µV/°C 200 400 kΩ INPUT CHARACTERISTICS CMIR Common Mode Input Range ±3 ±3.3 V CMRR Common Mode Rejection Ratio 42 50 dB +IIN + Input Current -60 3 60 µA -IIN - Input Current -35 4 35 µA RIN Input Resistance 37 kΩ CIN Input Capacitance 0.5 pF OUTPUT CHARACTERISTICS VO RL = 150Ω to GND ±3.4 ±3.7 V RL = 1kΩ to GND ±3.8 ±4.0 V Output Current RL = 10Ω to GND 95 120 mA ISON Supply Current - Enabled No load, VIN = 0V 5 6 7.5 mA ISOFF Supply Current - Disabled No load, VIN = 0V 100 150 µA PSRR Power Supply Rejection Ratio DC, VS = ±4.75V to ±5.25V IOUT Output Voltage Swing SUPPLY 2 55 75 dB FN7192.1 June 28, 2007 EL5292, EL5292A Electrical Specifications PARAMETER -IPSR VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. (Continued) DESCRIPTION - Input Current Power Supply Rejection CONDITIONS DC, VS = ±4.75 to ±5.25V MIN (Note 2) TYP -2 MAX (Note 2) UNIT 2 µA/V ENABLE (EL5292A Only) tEN Enable Time 40 ns tDIS Disable Time 600 ns IIHCE CE Pin Input High Current CE = VS+ 0.8 6 µA IILCE CE Pin Input Low Current CE = VS- 0 -0.1 µA VIHCE CE Input High Voltage for Power-down VILCE CE Input Low Voltage for Power-down VS+ - 1 V VS+ - 3 V NOTE: 1. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz 2. Parts are 100% tested at +25°C. Over temperature limits established by characterization and are not production tested. 3 FN7192.1 June 28, 2007 EL5292, EL5292A Typical Performance Curves Non-Inverting Frequency Response (Gain) Non-Inverting Frequency Response (Phase) 6 90 AV=2 0 -2 -90 AV=1 AV=2 Phase (°) Normalized Magnitude (dB) AV=1 2 AV=5 -6 AV=5 AV=10 -180 AV=10 -10 -270 -14 1M RF=750Ω RL=150Ω 10M 100M -360 1M 1G RF=750Ω RL=150Ω 10M Frequency (Hz) Inverting Frequency Response (Gain) 90 AV=-1 2 AV=-2 AV=-1 0 Phase (°) -2 AV=-5 -6 -10 -90 AV=-2 AV=-5 -180 -270 -14 1M RF=375Ω RL=150Ω 10M 100M -360 1M 1G RF=375Ω RL=150Ω 10M Frequency (Hz) 100M Frequency Response for Various CIN- Frequency Response for Various RL 6 RL=150Ω Normalized Magnitude (dB) 2pF added 6 1pF added 2 -2 -6 -10 1M 1G Frequency (Hz) 10 Normalized Magnitude (dB) 1G Inverting Frequency Response (Phase) 6 Normalized Magnitude (dB) 100M Frequency (Hz) 0pF added AV=2 RF=375Ω RL=150Ω 10M 100M Frequency (Hz) 4 1G RL=100Ω 2 RL=500Ω -2 -6 -10 -14 1M AV=2 RF=375Ω 10M 100M 1G Frequency (Hz) FN7192.1 June 28, 2007 EL5292, EL5292A Typical Performance Curves (Continued) Frequency Response for Various CL Frequency Response for Various RF 14 6 Normalized Magnitude (dB) Normalized Magnitude (dB) 250Ω 10 12pF added 6 8pF added 2 -2 -6 1M 0pF added AV=2 RF=375Ω RL=150Ω 10M 100M 475Ω -2 620Ω -6 750Ω -10 -14 1M 1G AV=2 RG=RF RL=150Ω 10M Frequency (Hz) 100M 1G Frequency (Hz) Group Delay vs Frequency Frequency Response for Various Common-Mode Input Voltages 3.5 6 2.5 Normalized Magnitude (dB) 3 Group Delay (ns) 375Ω 2 AV=2 RF=375Ω 2 1.5 1 AV=1 RF=750Ω 0.5 0 1M 10M 100M VCM=3V -2 VCM=-3V -6 -10 -14 1M 1G VCM=0V 2 AV=2 RF=375Ω RL=150Ω 10M Frequency (Hz) 100M 1G Frequency (Hz) Transimpedance (ROL) vs Frequency PSRR and CMRR vs Frequency 10M 20 0 Phase 100k -180 10k -270 Gain 1k PSRR/CMRR (dB) 0 -90 Phase (°) Magnitude (Ω) 1M PSRR+ -20 PSRR-40 -60 CMRR -360 100 1k 10k 100k 1M 10M Frequency (Hz) 5 100M 1G -80 10k 100k 1M 10M Frequency (Hz) 100M 1G FN7192.1 June 28, 2007 EL5292, EL5292A Typical Performance Curves (Continued) -3dB Bandwidth vs Supply Voltage for NonInverting Gains -3dB Bandwidth vs Supply Voltage for Inverting Gains 350 RF=750Ω RL=150Ω 300 600 -3dB Bandwidth (MHz) -3dB Bandwidth (MHz) 800 AV=1 400 AV=2 200 AV=5 AV=10 AV=-1 250 AV=-2 200 AV=-5 150 100 50 0 RF=375Ω RL=150Ω 0 5 6 7 8 9 10 5 6 Total Supply Voltage (V) Peaking vs Supply Voltage for Non-Inverting Gains 4 3 Peaking (dB) Peaking (dB) 10 RF=375Ω RL=150Ω AV=-1 2 AV=-2 2 1 AV=2 AV=10 AV=-5 0 0 5 6 7 8 9 10 5 Total Supply Voltage (V) 1000 800 600 400 AV=2 AV=5 8 9 10 -3dB Bandwidth vs Temperature for Inverting Gains RF=750Ω RL=150Ω AV=1 7 500 -3dB Bandwidth (MHz) 1200 6 Total Supply Voltage (V) -3dB Bandwidth vs Temperature for Non-Inverting Gains 1400 -3dB Bandwidth (MHz) 9 Peaking vs Supply Voltage for Inverting Gains AV=1 1 8 4 RF=750Ω RL=150Ω 3 7 Total Supply Voltage (V) AV=10 400 300 RF=375Ω RL=150Ω AV=-1 AV=-2 200 AV=-5 100 200 0 -40 10 60 110 Ambient Temperature (°C) 6 160 0 -40 10 60 110 160 Ambient Temperature (°C) FN7192.1 June 28, 2007 EL5292, EL5292A Typical Performance Curves (Continued) Peaking vs Temperature 2 Voltage Noise (nV/√Hz) Current Noise (pA/√Hz) RL=150Ω 1.5 Peaking (dB) Voltage and Current Noise vs Frequency 1k AV=1 1 AV=-1 0.5 AV=-2 0 100 i n+ in- 10 en AV=2 -0.5 -50 -50 0 50 1 100 100 1k Ambient Temperature (°C) 10 10 8 1 0.1 0.01 0.001 10M 6 4 2 0 100 1k 10k 100k 1M 10M Frequency (Hz) 100M 1G 0 2nd and 3rd Harmonic Distortion vs Frequency -20 -50 2nd Order Distortion -60 -70 3rd Order Distortion -80 -90 -100 1 10 Frequency (MHz) 7 4 6 8 Supply Voltage (V) 10 12 Two-Tone 3rd Order Input Referred Intermodulation Intercept (IIP3) Input Power Intercept (dBm) -40 2 30 AV=+2 VOUT=2VP-P RL=100Ω -30 Harmonic Distortion (dBc) 1M Supply Current vs Supply Voltage 100 Supply Current (mA) Output Impedance (Ω) Closed Loop Output Impedance vs Frequency 10k 100k Frequency (Hz) 100 AV=+2 RL=150Ω 25 20 15 10 5 0 -5 -10 -15 10 AV=+2 RL=100Ω 100 200 Frequency (MHz) FN7192.1 June 28, 2007 EL5292, EL5292A Typical Performance Curves (Continued) Differential Gain/Phase vs DC Input Voltage at 3.58MHz AV=2 RF=RG=375Ω RL=150Ω 0.02 dG (%) or dP (°) 0.01 Differential Gain/Phase vs DC Input Voltage at 3.58MHz 0.03 dP 0.01 0 dG -0.01 -0.02 0 -0.03 -0.04 -0.05 0 0.5 dG -0.02 -0.04 -0.5 -0.06 -1 1 dP -0.01 -0.03 -0.05 -1 AV=1 RF=750Ω RL=500Ω 0.02 dG (%) or dP (°) 0.03 -0.5 DC Input Voltage Output Voltage Swing vs Frequency THD