MK1716-01RLFTR

DATASHEET MK1716-01 SERIAL PROGRAMMABLE PCI SS VERSACLOCK SYNTHESIZER Description Features The MK1716-01 is a versatile serial programmable clock source which takes up very little board space. • Packaged in 28-pin SSOP • Operating voltage 3.3 V • Serially programmable: user determines the output The device can simultaneously generate two groups of 4 output clocks and a reference clock output. Both clock groups (CLKA and CLKB) are derived from a single PLL, and have the ability to incorporate Spread Spectrum frequency modulation for reduced system EMI. Each group has control of independent PLL output divide values. Outputs may be programmed on the fly, and will lock to a new frequency in 10 ms or less. • • • • • • • Each of the two groups are powered by a separate VDDIO voltage. The reference clock uses the fixed VDD voltage. VDDIO may vary from 2.5 V to VDD. • • • • • • The devices includes a OE pin which tri-states the output clocks and when tied low. IDT’s VersaClockTM software allows the user to generate MK1716-01 device optimizing configuration code for target output frequencies and spread spectrum amounts. frequency via a 3-wire interface Highly accurate frequency generation M/N Multiplier PLL: M = 1..2048, N = 1..1024 Eliminates the need for custom Quartz Oscillators Input crystal frequency of 5-27 MHz Input clock frequency of 3-50 MHz Output clock frequencies of 250 kHz to 133.33 MHz Spread Spectrum frequency modulation for reduced system EMI Center or down spread ±0.5% min to 4% total Selectable 32 kHz and 120 kHz modulation rate Advanced, low power, sub-micron CMOS process Separate VDD ‘s for each bank of 4 outputs Output skew