RN5RF35BA-TR-FE

RN5RF SERIES LOW RIPPLE VOLTAGE REGULATOR WITH EXTERNAL TRANSISTOR NO. EA-043-111116 OUTLINE The RN5RF Series are CMOS-based voltage regulator ICs which control external driver transistors with high ripple rejection, high accuracy output voltage, low supply current. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, output voltage setting resistor, short circuit current limiting circuit and chip enable circuit. These ICs are suitable for constructing regulators with ultra low dropout voltage and an output current in the range of several tens of mA and several hundreds mA. In addition to low supply current by CMOS process, chip enable function can be used to conserve battery life during standby. Furthermore, a supreme ripple rejection and a transient response are suitable for portable communicator such as cell phones, PDAs, walky talkies. SOT23-5 (Mini Mold) package is available. FEATURES • • • • • • • • Supply Current ............................................................. Typ. 30μA Supply Current (Standby) ........................................... Typ. 0.1μA Output Voltage Accuracy..............................................±2% Ripple Rejection........................................................... Typ. 60dB (f=1kHz) Dropout Voltage ........................................................... Typ. 0.1V (IOUT=100mA, dependent on External Tr.) Temperature-Drift Coefficient of Output Voltage .......... Typ. ± 100ppm/°C Line Regulation ............................................................ Typ. 0.05%/V Output Voltage Range.................................................. 1.2V to 6.0V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) • Package ....................................................................... SOT-23-5 • Current Limit for external Tr. ........................................ Current limit Typ. 8mA APPLICATIONS • Power source for battery-powered equipment • Power source for hand-held communication equipment, cameras, and VCRs • Power source for home appliances 1 RN5RF BLOCK DIAGRAMS RN5RFxxA RN5RFxxB 4 EXT VDD 2 4 3 VOUT VDD 2 3 - - + + Vref EXT VOUT Vref Current Limit CE 5 Current Limit 1 GND CE 5 1 GND SELECTION GUIDE The output voltage and CE pin polarity for the ICs can be selected at the user’s request. Product Name Package Quantity per Reel Pb Free Halogen Free RN5RFxx∗A-TR-FE SOT-23-5 3,000 pcs Yes Yes xx : The output voltage can be designated in the range from 1.2V (12) to 6.0V (60) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.) ∗ : CE pin polarity are options as follows (A) "L" active (B) "H" active 2 RN5RF PIN CONFIGURATION z SOT-23-5 5 4 (mark side) 1 2 3 PIN DESCRIPTION • SOT-23-5 Pin No Symbol Pin Description 1 GND 2 VDD Input Pin 3 VOUT Output Pin 4 EXT External Transistor Drive Pin (CMOS Output) 5 CE or CE Ground Pin Chip Enable Pin 3 RN5RF ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit 12.0 V VIN Input Voltage VCE Input Voltage ( CE or CE) −0.3 to VIN+0.3 V VEXT EXT Output Voltage −0.3 to VIN+0.3 V IEXT EXT Output Current 50 mA 420 mW PD ∗ Power Dissipation (SOT-23-5) Topt Operating Temperature Range −40 to 85 °C Tstg Storage Temperature Range −55 to 125 °C ∗) For Power Dissipation, please refer to PACKAGE INFORMATION. ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings is not assured. RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS) All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions. 4 RN5RF ELECTRICAL CHARACTERISTICS • RN5RFxxA
;+= Symbol Item Conditions Typ. Max. ''
; ' '
 '
 
;1&' ×1#J> ×3#1+ 5
 5  
   55
;3#15   $G
  5;F#15!5 ;+#15 55
;3#15 3#1  > Unit 5 ' 3 &' 81 &5 ∆5
:∆
 0   5 ) 5  
;311&'!
;1&' 1#3 1#+ 5  "  55
;3#15 ,1 1 2'  "  "  5;31#15 1#31 3#11 2' 1# 2' 1#,1 7:5   3&'≤
≤311&' 81 1#13 $G
0 *   
;1&' ∆5
:∆5 0     5 5  31 5 5  $G
5  31 5 ∆5
:∆
 5
H1#5≤5≤315 %;3*4 Unit ∆5
:∆V 0     5 5  31 5 5  $G
5  31 5 ∆5
:∆
 5
H1#5≤5≤315 1#11 %;3*4