UMX3N

Transistors EMW2 / EMX2 / EMX3 / UMW2N /UMX2N / UMX3N / FMW2 / IMX2 / IMX3 General purpose (dual transistors) EMW2 / EMX2 / EMX3 / UMW2N / UMX2N / UMX3N / FMW2 / IMX2 / IMX3 Features 1) Two 2SC2412AK chips in a EMT or UMT or SMT package. Equivalent circuit EMW2 / UMW2N (3) (2) (1) FMW2 (3) (4) (5) EMX2 / UMX2N (3) (2) (1) IMX2 (4) (5) (6) EMX3 / UMX3N (3) (2) (1) IMX3 (4) (5) (6) (4) (5) (2) (1) (4) (5) (6) (3) (2) (1) (4) (5) (6) (3) (2) (1) Absolute maximum ratings (Ta = 25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation EMW2 / EMX2 / EMX3 / UMW2N / UMX2N / UMX3N FMW2 / IMX2 / IMX3 Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 60 50 7 150 150(TOTAL) 300(TOTAL) 150 −55~+150 Unit V V V mA mW ∗1 ∗2 Junction temperature Storage temperature ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. °C °C Electrical characteristics (Ta = 25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance ∗Transition frequency of the device. Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 60 50 7 − − − 120 − − Typ. − − − − − − − 180 2 Max. − − − 0.1 0.1 0.4 560 − 3.5 Unit V V V µA µA V − MHz pF IC=50µA IC=1mA IE=50µA VCB=60V VEB=7V Conditions IC/IB=50mA/5mA VCE=6V, IC=1mA VCE=12V, IE=−2mA, f=100MHz VCB=12V, IE=0mA, f=1kHz ∗ Package, marking, and packaging specifications Type Package Marking Code Basic ordering unit (pieces) EMW2 EMT5 W2 T2R 8000 EMX2 EMT6 X2 T2R 8000 EMX3 EMT6 X3 T2R 8000 UMW2N UMT5 W2 TR 3000 UMX2N UMT6 X2 TR 3000 UMX3N UMT6 X3 TR 3000 FMW2 SMT5 W2 T148 3000 IMX2 SMT6 X2 T108 3000 IMX3 SMT6 X3 T108 3000 Transistors External dimensions (Units : mm) EMW2 EMW2 / EMX2 / EMX3 / UMW2N /UMX2N / UMX3N / FMW2 / IMX2 / IMX3 EMX2 / EMX3 0.5 0.5 1.0 1.6 0.22 0.22 (4) (3) (2) (4) (5) (6) (3) (2) (5) 0.13 0.13 1.2 1.6 (1) 1.2 1.6 (1) ROHM : EMT5 0.5 Each lead has same dimensions ROHM : EMT6 Each lead has same dimensions (4) (3) 0.65 0.65 UMW2N 0.2 UMX2N / UMX3N (4) (3) 1.3 2.0 0.2 (2) (5) (2) 0.65 1.3 0.65 0.8 1.1 0.95 0.95 1.9 2.9 0.7 0.9 0.5 (6) 1.25 2.1 0.5 0.5 1.0 1.6 2.0 (5) (1) 1.25 2.1 0.15 0.7 0.9 0.1Min. 0to0.1 0.15 0.1Min. ROHM : UMT5 EIAJ : SC-88A Each lead has same dimensions 0to0.1 1.6 2.8 0to0.1 (3) (2) (1) ROHM : UMT6 EIAJ : SC-88 Each lead has same dimensions FMW2 0.95 0.95 1.9 (2) IMX2 / IMX3 0.3 2.9 0.3 (3) (6) (4) (1) 1.6 2.8 0.15 (5) 0.8 1.1 0.3to0.6 0to0.1 0.3to0.6 ROHM : SMT5 EIAJ : SC-74A Each lead has same dimensions 0.15 (4) (5) ROHM : SMT6 EIAJ : SC-74 Each lead has same dimensions (1) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0