CL10Y105MR5NJND

SPECIFICATION (Reference sheet)  Samsung P/N : CL10Y105MR5NJND  Description : CAP, 1㎌, 4V, ±20%, X7S, 0603  Supplier : Samsung electro-mechanics  Product : Multi-layer Ceramic Capacitor A. Samsung Part Number ① Series ② Size CL 10 Y 105 M R 5 N J N D ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 0603 (inch code) L: 1.60 ± 0.10 ③ Dielectric ④ Capacitance ⑤ Capacitance tolerance ⑥ Rated Voltage ⑦ Thickness X7S 1㎌ ±20 % W: ㎜ ⑧ Inner electrode Termination Plating ⑨ Product ⑩ Special ⑪ Packaging 4V 0.50 +0.05/-0.1 ㎜ 0.80 ± 0.10 ㎜ Ni Cu Sn 100% (Pb Free) SLIC Reserved for future use Cardboard Type, 13" reel B. Structure and Dimensions Dimension(㎜) Samsung P/N L CL10Y105MR5NJND W T 1.60±0.10 0.80±0.10 0.5 +0.05/-0.1 BW SW P 0.25±0.10 0.15±0.10 0.40±0.10 C. Samsung Reliablility Test and Judgement Condition Judgement Capacitance Tan δ (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Within specified tolerance 0.12 max. Capacitance change : Tan δ, IR : initial spec. Capacitance change : Tan δ, IR : initial spec. Moisture Resistance Capacitance change : Tan δ : 0.2 max IR : 500Mohm or 12.5Mohm × ㎌ Whichever is smaller Capacitance change : within ±12.5% Tan δ : 0.2 max IR : 1,000Mohm or 25Mohm × ㎌ Whichever is smaller Capacitance change : within ±12.5% Tan δ, IR : initial spec. Temperature Cycling 1㎑ ±10% / 0.5±0.1Vrms Rated Voltage 60~120 sec. 10,000Mohm or 50Mohm×㎌ Whichever is smaller No abnormal exterior appearance Microscope (×10) 250% of the rated voltage No dielectric breakdown or mechanical breakdown X7S (From -55℃ to 125℃, Capacitance change should be within ±22%) No peeling shall be occur on the 500gF, for 10±1 sec. terminal electrode Capacitance change : within ±12.5% Bending to the limit (1㎜) with 1.0mm/sec. More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Soldering heat Vibration Test High Temperature Resistance Test condition within ±7.5% Solder pot : 270±5℃, 10±1sec. within ±20% Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours × 3 direction (x, y, z) within ±12.5% With rated voltage 40±2℃, 90~95%RH, 500+12/-0hrs With 150% of the rated voltage Max. operating temperature 1,000+48/-0hrs 1 cycle condition Min. operating temperature → Max. operating temperature → → 5 cycle test ※ The reliability test condition can be replaced by the corresponding accelerated test condition. D. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260±5℃, 30sec. ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25℃ 25℃ - Caution of Application - Disclaimer The products listed as follows are NOT designed and manufactured for any use and applications set forth below. Please note that any misuse of the products deviating from products specifications or information provided in this Spec sheet may cause serious property damages or personal injury. ① Aerospace/Aviation equipment ② Automotive of Transportation equipment (vehicles，trains，ships，etc) ③ Military equipment ④ Atomic energy-related equipment ⑤ Undersea equipment ⑥ Any other applications with the same as or similar complexity or reliability to the applications Limitation Please contact us with usage environment information such as voltage, current, temperature, or other special conditions before using our products for the applications listed below. The below application conditions require especially high reliability products to prevent defects that may directly cause damages or loss to third party's life, body or property. If you have any questions regarding this 'Limitation'，you should first contact our sales personnel or application engineers. ① Medical equipment ② Disaster prevention/crime prevention equipment ③ Power plant control equipment ④ Traffic signal equipment ⑤ Data-processing equipment ⑥ Electric heating apparatus，burning equipment ⑦ Safety equipment ⑧ Any other applications with the same as or similar complexity or reliability to the applications