GW19NC60HD

STGB19NC60HD - STGF19NC60HD STGP19NC60HD - STGW19NC60HD 19 A - 600 V - very fast IGBT Features ■ ■ ■ Low on-voltage drop (VCE(sat)) Low CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery anti-parallel diode 3 1 1 3 2 D²PAK TO-220 Applications ■ ■ ■ High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drives 2 1 3 1 2 3 TO-247 TO-220FP Description This IGBT utilizes the advanced Power MESH™ process resulting in an excellent trade-off between switching performance and low on-state behavior. Figure 1. Internal schematic diagram Table 1. Device summary Marking GB19NC60HD GF19NC60HD GP19NC60HD GW19NC60HD Package D²PAK TO-220FP TO-220 TO-247 Packaging Tape and reel Tube Tube Tube Order codes STGB19NC60HDT4 STGF19NC60HD STGP19NC60HD STGW19NC60HD July 2008 Rev 3 1/18 www.st.com 18 Contents STGB/F/P/W19NC60HD Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 7 3 4 5 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 STGB/F/P/W19NC60HD Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220 D²PAK VCES IC(1) IC(1) ICL (2) ICP (3) IF IFSM VGE PTOT Tj Collector-emitter voltage (VGE = 0) Collector current (continuous) at TC = 25 °C Collector current (continuous) at TC = 100 °C Turn-off latching current Pulsed collector current Diode RMS forward current at TC = 25 °C Surge not repetitive forward current tp=10 ms sinusoidal Gate-emitter voltage Total dissipation at TC = 25 °C Operating junction temperature 130 40 19 Unit TO-220FP 600 16 10 40 40 20 50 ±20 32 – 55 to 150 140 42 21 TO-247 V A A A A A A V W °C 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R ×V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=80%VCES, TJ= 150 °C, RG =1 0 Ω, VGE = 15 V 3. Pulse width limited by max. temperature allowed Table 3. Thermal resistance Value Symbol Parameter TO-220 D²PAK Unit TO-220FP TO-247 Rthj-case Thermal resistance junction-case max. IGBT Thermal resistance junction-case max.diode Thermal resistance junctionambient max 0.95 3.0 62.5 3.9 5.5 0.9 3.0 30 °C/W °C/W °C/W Rthj-amb 3/18 Electrical characteristics STGB/F/P/W19NC60HD 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol Static Parameter Test conditions Min. Typ. Max. Unit Collector-emitter VBR(CES) breakdown voltage (VGE= 0) VCE(sat) VGE(th) ICES IGES gfs (1) 1. IC= 1 mA 600 V Collector-emitter saturation VGE= 15 V, IC= 12 A voltage VGE= 15 V, IC=12 A,Tc=125 °C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 µA VCE= 600 V VCE= 600 V,TC= 125 °C VGE= ±20 V VCE = 15 V, IC= 12 A 3.75 1.8 1.6 2.5 V V V µA mA nA S 5.75 150 1 ±100 5 Pulsed: Pulse duration = 300 ìs, duty cycle 1.5% Table 5. Symbol Cies Coes Cres Qg Qge Qgc Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions Min. Typ. 1180 130 36 Max. Unit pF pF pF VCE = 25 V, f = 1 MHz, VGE = 0 VCE = 390 V, IC = 5 A, VGE = 15 V, Figure 20 53 10 23 nC nC nC 4/18 STGB/F/P/W19NC60HD Electrical characteristics Table 6. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(Voff) tf tr(Voff) td(Voff) tf Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390 V, IC = 12 A , RG= 10 Ω VGE= 15 V, Figure 21 VCC = 390 V, IC = 12 A , RG= 10 Ω VGE= 15 V, Tc = 125 °C Figure 21 VCC = 390 V, IC = 12 A RG= 10 Ω VGE= 15 V, , Figure 21 VCC = 390 V, IC = 12 A , RG= 10 Ω VGE= 15 V, Tc = 125 °C Figure 21 Min. Typ. 25 7 1600 24 8 1400 27 97 73 58 144 128 Max. Unit ns ns A/µs ns ns A/µs ns ns ns ns ns ns Table 7. Symbol Eon Eoff(1) Ets Eon Eoff(1) Ets Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390 V, IC = 12 A , RG= 10 Ω VGE= 15 V, Figure 21 VCC = 390 V, IC = 12 A RG= 10 Ω VGE= 15 V, , Tc = 125 °C Figure 21 Min. Typ. 85 189 274 187 407 594 Max. Unit µJ µJ µJ µJ µJ µJ 1. Turn-off losses include also the tail of the collector current 5/18 Electrical characteristics STGB/F/P/W19NC60HD Table 8. Symbol VF trr Qrr Irrm trr Qrr Irrm Collector-emitter diode Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions IF = 12 A IF = 12 A, TC = 125 °C IF = 12 A, VR = 40 V, di/dt = 100 A/µs Figure 22 IF = 12 A, VR = 40 V, TC =125 °C, di/dt = 100 A/µs Figure 22 Min. Typ. 2.6 2.1 31 30 2 59 102 4 Max. Unit V V ns nC A ns nC A 6/18 STGB/F/P/W19NC60HD Electrical characteristics 2.1 Figure 2. Electrical characteristics (curves) Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs temperature Figure 6. Gate charge vs gate-source voltage Figure 7. Capacitance variations 7/18 Electrical characteristics Figure 8. Normalized gate threshold voltage vs temperature Figure 9. STGB/F/P/W19NC60HD Collector-emitter on voltage vs collector current Figure 10. Normalized breakdown voltage vs temperature Figure 11. Switching losses vs temperature Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current 8/18 STGB/F/P/W19NC60HD Figure 14. Turn-off SOA Electrical characteristics Figure 15. Forward voltage drop versus forward current IFM(A) 50 45 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 Tj=25°C (maximum values) Tj=125°C (typical values) Tj=125°C (maximum values) VFM(V) Figure 16. Thermal impedance for TO-220 D²PAK Figure 17. Thermal impedance for TO-220FP Figure 18. Thermal impedance for TO-247 9/18 Test circuits STGB/F/P/W19NC60HD 3 Test circuits Figure 20. Gate charge test circuit Figure 19. Test circuit for inductive load switching Figure 21. Switching waveform Figure 22. Diode recovery time waveform 10/18 STGB/F/P/W19NC60HD Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/18 Package mechanical data STGB/F/P/W19NC60HD TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 12/18 STGB/F/P/W19NC60HD Package mechanical data D²PAK (TO-263) mechanical data mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0° 8° 0° 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° 0079457_M 13/18 Package mechanical data STGB/F/P/W19NC60HD TO-220FP mechanical data Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 A B L3 L6 L7 Dia F1 D F G1 H F2 L2 L5 E 123 L4 7012510-I 14/18 G STGB/F/P/W19NC60HD Package mechanical data TO-247 mechanical data mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max . 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 Dim. A A1 b b1 b2 c D E e L L1 L2 øP øR S 15/18 Packaging mechanical data STGB/F/P/W19NC60HD 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 16/18 STGB/F/P/W19NC60HD Revision history 6 Revision history Table 9. Date 02-Nov-2006 05-Jan-2007 01-Jul-2008 Document revision history Revision 1 2 3 Initial release. Complete version – Modified: Table 2: Absolute maximum ratings – Inserted new packages, mechanical data:TO-220FP, TO-247 Changes 17/18 STGB/F/P/W19NC60HD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18