STB11NK40ZT4

STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Datasheet N-channel 400 V, 0.47 Ω typ., 9 A SuperMESH Power MOSFETs in a D2PAK, TO‑220 and TO‑220FP packages Features TAB TAB Order code 1 VDS RDS(on) max. ID Package 3 D2PAK TO-220 1 2 D2PAK STB11NK40ZT4 3 STP11NK40Z 400 V STP11NK40ZFP 1 2 • • • • 3 TO-220FP D(2, TAB) 0.55 Ω 9A TO-220 TO-220FP 100% avalanche tested Gate charge minimized Very low intrinsic capacitance Zener-protected Applications • G(1) Switching applications Description S(3) NG1D2TS3Z These high-voltage devices are Zener-protected N-channel Power MOSFETs developed using the SuperMESH™ technology by STMicroelectronics, an optimization of the well-established PowerMESH™. In addition to a significant reduction in on-resistance, these devices are designed to ensure a high level of dv/dt capability for the most demanding applications. Product status link STB11NK40ZT4 STP11NK40Z STP11NK40ZFP DS2843 - Rev 8 - October 2018 For further information contact your local STMicroelectronics sales office. www.st.com STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter D2PAK, TO-220FP TO-220 Unit VDS Drain-source voltage 400 V VGS Gate-source voltage ±30 V ID Drain current (continuous) at TC = 25 °C 9 9 (1) A ID Drain current (continuous) at TC = 100 °C 5.67 5.67 (1) A IDM (2) Drain current (pulsed) 36 36 (1) A PTOT Total dissipation at TC = 25 °C 110 30 W ESD dv/dt (3) VISO Tj Tstg Gate-source human body model (C = 100 pF, R = 1.5 kΩ) Peak diode recovery voltage slope 3.5 kV 4.5 V/ns Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25 °C) 2.5 Operating junction temperature range -55 to 150 Storage temperature range kV °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 9 A, di/dt ≤ 200 A/μs, VDD = 80% V(BR)DSS, Tj ≤ TJMAX. Table 2. Thermal data Symbol Value Parameter D2PAK Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb (1) TO-220 TO-220FP 1.14 Thermal resistance junction-pcb 4.17 62.5 Unit °C/W °C/W 50 °C/W 1. When mounted on 1inch² FR-4 board, 2 oz Cu. Table 3. Avalanche characteristics Symbol DS2843 - Rev 8 Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) Value Unit 9 A 190 mJ page 2/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source Breakdown voltage Test condition ID = 1 mA, VGS = 0 V Min. Typ. Max. 400 Unit V VGS = 0 V, VDS = 400 V 1 µA VGS = 0 V, VDS = 400 V, TC = 125 °C(1) 50 µA ±10 µA 3.75 4.5 V 0.47 0.55 Ω Typ. Max. Unit - pF - pF - nC IDSS Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 100 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 4.5 A 3 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Ciss Parameter Min. Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Coss eq. (1) Test condition 930 VDS = 25 V, f = 1 MHz, VGS = 0 V - 140 30 Equivalent output capacitance VDS = 0 to 320 V, VGS = 0 V Qg Total gate charge VDD = 320 V, ID = 9 A, Qgs Gate-source charge Qgd Gate-drain charge VGS = 0 to 10 V (see Figure 16. Test circuit for gate charge behavior) - 78 32 - 6 18.5 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) Test condition Min. Typ. Turn-on delay time VDD = 200 V, ID = 4.5 A, Rise time Fall time RG = 4.7 Ω, VGS = 10 V (see Figure 15. Test circuit for resistive load switching times and Figure 20. Switching time waveform) Off-voltage rise time VDD = 320 V, ID = 9 A, 15 tf Fall time 17 tc Cross-over time RG = 4.7 Ω, VGS = 10 V (see Figure 17. Test circuit for inductive load switching and diode recovery times) tr td(off) tf tr(Voff) DS2843 - Rev 8 Parameter Turn-off delay time Max. Unit 20 20 - 40 18 - ns 30 page 3/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical characteristics Table 7. Source drain diode Symbol ISD Parameter Test condition Min. Source-drain current Typ. 9 - ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 9 A, VGS = 0 V trr Reverse recovery time Qrr Reverse recovery charge ISD = 9 A, di/dt = 100 A/μs, VDD = 45 V, Tj = 150 °C IRRM Reverse recovery current 36 - - (see Figure 17. Test circuit for inductive load switching and diode recovery times) Max. 1.6 Unit A V 225 ns 1.6 μC 14 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. Table 8. Gate-source Zener diode Symbol V(BR)GSO Parameter Gate-source breakdown voltage Test conditions IGS = ±1 mA, ID = 0 A Min. Typ. Max. Unit ±30 - - V The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry. DS2843 - Rev 8 page 4/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical characteristics curves 2.1 Electrical characteristics curves Figure 1. Safe operating area for TO-220, D²PAK Figure 2. Thermal impedance for TO-220, D²PAK K GADG020320181545ZTH δ=0.5 0.2 0.1 10 -1 0.05 0.02 0.01 10 -2 10 -5 Zth=k*Rthj-c Single pulse 10 -4 10 -3 10 -2 10 -1 tp (s) Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics DS2843 - Rev 8 page 5/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical characteristics curves Figure 7. Static drain-source on resistance Figure 8. Gate charge vs gate-source voltage Figure 9. Capacitance variations Figure 10. Normalized gate threshold voltage vs temperature Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics DS2843 - Rev 8 page 6/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Electrical characteristics curves Figure 13. Normalized V(BR)DSS vs temperature Figure 14. Maximum avalanche energy vs temperature ID=9A VDD=50V DS2843 - Rev 8 page 7/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Test circuits 3 Test circuits Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 17. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 18. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 20. Switching time waveform Figure 19. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS2843 - Rev 8 page 8/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS2843 - Rev 8 page 9/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK (TO-263) type A package information 4.1 D²PAK (TO-263) type A package information Figure 21. D²PAK (TO-263) type A package outline 0079457_25 DS2843 - Rev 8 page 10/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK (TO-263) type A package information Table 9. D²PAK (TO-263) type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10.00 E1 8.30 8.50 8.70 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15.00 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 DS2843 - Rev 8 Typ. 0.40 0° 8° page 11/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK (TO-263) type B package information 4.2 D²PAK (TO-263) type B package information Figure 22. D²PAK (TO-263) type B package outline 0079457_25_B DS2843 - Rev 8 page 12/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK (TO-263) type B package information Table 10. D²PAK (TO-263) type B mechanical data Dim. mm Min. Max. A 4.36 4.56 A1 0 0.25 b 0.70 0.90 b1 0.51 0.89 b2 1.17 1.37 b3 1.36 1.46 c 0.38 0.694 c1 0.38 0.534 c2 1.19 1.34 D 8.60 9.00 D1 6.90 7.50 E 10.15 10.55 E1 8.10 8.70 e 2.54 BSC H 15.00 15.60 L 1.90 2.50 L1 1.65 L2 1.78 L3 L4 DS2843 - Rev 8 Typ. 0.25 4.78 5.28 page 13/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK (TO-263) type B package information Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm) Footprint DS2843 - Rev 8 page 14/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK packing information 4.3 D²PAK packing information Figure 24. D²PAK tape outline DS2843 - Rev 8 page 15/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK packing information Figure 25. D²PAK reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 11. D²PAK tape and reel mechanical data Tape Dim. DS2843 - Rev 8 Reel mm mm Dim. Min. Max. Min. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T Max. 330 13.2 26.4 30.4 P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 page 16/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK type B packing information 4.4 D²PAK type B packing information Figure 26. D²PAK type B tape outline Figure 27. D²PAK type B reel outline T 40mm min. access hole at slot location B D C N A Full radius Tape slot in core for tape start 2.5mm min.width G measured at hub AM06038v1 DS2843 - Rev 8 page 17/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP D²PAK type B packing information Table 12. D²PAK type B reel mechanical data Dim. mm Min. A DS2843 - Rev 8 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T Max. 13.2 26.4 30.4 page 18/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP TO-220FP package information 4.5 TO-220FP package information Figure 28. TO-220FP package outline 7012510_Rev_12_B DS2843 - Rev 8 page 19/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP TO-220FP package information Table 13. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS2843 - Rev 8 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 20/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP TO-220 type A package information 4.6 TO-220 type A package information Figure 29. TO-220 type A package outline 0015988_typeA_Rev_21 DS2843 - Rev 8 page 21/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP TO-220 type A package information Table 14. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS2843 - Rev 8 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 page 22/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Ordering information 5 Ordering information Table 15. Order codes Order code DS2843 - Rev 8 Marking Package Packing STB11NK40ZT4 B11NK40Z D2PAK Tape and reel STP11NK40Z P11NK40Z TO-220 STP11NK40ZFP P11NK40ZFP TO-220FP Tube page 23/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Revision history Table 16. Document revision history DS2843 - Rev 8 Date Version Changes 23-Aug-2005 2 Preliminary version 28-Oct-2005 3 Complete version 26-Jul-2006 4 New template, no content change 22-Nov-2006 5 Corrected unit on Table 5.: On/off states 18-Jan-2007 6 Typo mistakes on page 1 20-Apr-2009 7 Updated mechanical data 02-Oct-2018 8 Updated Section 4 Package information. Minor text changes. page 24/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 4.1 D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 D²PAK (TO-263) type B package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 D²PAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 D²PAK type B packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.6 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 DS2843 - Rev 8 page 25/26 STB11NK40ZT4, STP11NK40Z, STP11NK40ZFP IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS2843 - Rev 8 page 26/26