0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
STP08CL596B1

STP08CL596B1

  • 厂商:

    STMICROELECTRONICS(意法半导体)

  • 封装:

    DIP16

  • 描述:

    IC LED DRIVER LINEAR 90MA 16DIP

  • 数据手册
  • 价格&库存
STP08CL596B1 数据手册
STP08CL596 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER I I I I I I I I I LOW VOLTAGE POWER SUPPLY DOWN TO 3V 8 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA OUT SERIAL OUT CHANGES STATE ON THE FAILING EDGES OF CLOCK 3.3V MICRO DRIVER-ABLE OUTPUT CURRENT: 15-90 mA 25 MHz CLOCK FREQ. AVAILABLE IN HIGH THERMAL EFFICIENCY TSSOP EXPOSED PAD DIP-16 SO-16 TSSOP16 DESCRIPTION The STP8CL596 is a monolithic, medium-voltage, low current power 8-bit shift register designed for LED panel display. The STP8CL596 contains a 8-bit serial-in, parallel-out shift register that feeds a 8-bitD-type storage register. In the output stage, sixteen regulated current sources were designed to provide 15-90mA constant current to drive the LEDs. Compared with the STPIC6C595, the device provides great flexibility and improved performance in LED panel system design. Table 1: Order Codes Part Number STP08CL596B1 STP08CL596M STP08CL596MTR STP08CL596TTR Temp. Range -40°C to -40°C to -40°C to -40°C to 125°C 125°C 125°C 125°C Trough an external resistor, users may adjust the STP8CL596 output current, controlling in this way the light intensity of LEDs. The STP8CL596 guarantees 16V output driving capability, allowing users to connect more LEDs in series. The high clock frequency, 25 MHz, also satisfies the system requirement of high volume data transmission. The 3.3V of voltage supply is well useful for applications that interface any micro from 3.3V to 5.5V. Compared with a standard TSSOP package, the TSSOP exposed pad increases heat dissipation capability by a 2.5 factor. Package DIP-16 SO-16 (Tube) SO-16 (Tape & Reel) TSSOP16 (Tape & Reel) Comments 25 part per tube 50 parts per tube 1000 parts per reel 2500 parts per reel February 2005 Rev. 8 1/16 STP08CL596 Table 2: Current Accuracy Current accuracy Output Voltage Between bits ≥ 0.7V ± 3% Between ICs ± 10% 15 to 90 mA Output Current Figure 1: Pin Connection Table 3: Pin Description PIN N° 1 2 3 4 5-12 13 14 15 16 Symbol GND SDI CLK /LE OUT 0-7 /OE SDO R-EXT VDD Name and Function Ground Terminal Serial data input terminal Clock input terminal Latch input terminal Output terminal Output enable input terminal (active low) Serial data out terminal Constant Current programming 5V Supply voltage terminal Table 4: Absolute Maximum Ratings Symbol VDD VO IO VI IGND fCLK TOPR TSTG Supply Voltage Output Voltage Output Current Input Voltage GND Terminal Current Clock Frequency Operating Temperature Range Storage Temperature Range Parameter Value 0 to 7 -0.5 to 16 90 -0.4 to VDD+0.4 720 25 -40 to +125 -65 to +150 Unit V V mA V mA MHz °C °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. 2/16 STP08CL596 Table 5: Thermal Data Symbol Rthj-amb Parameter Thermal Resistance Junction-ambient DIP-16 90 SO-16 125 TSSOP16 140 Unit °C/W Table 6: Recommended Operating Conditions Symbol VDD VO IO IOH IOL VIH VIL twLAT twCLK twEN tHOLD(D) fCLK Parameter Supply Voltage Output Voltage Output Current Output Current Output Current Input Voltage Input Voltage /LE Pulse Width CLK Pulse Width /OE Pulse Width Hold Time for DATA Clock Frequency Cascade Operation VDD = 3.0 to 3.6V OUTn SERIAL-OUT SERIAL-OUT 0.7VDD -0.3 20 20 400 20 15 15 25 15 Test Conditions Min. 3.0 Typ. 3.3 Max. 3.6 16.0 120 +1 -1 VDD+0.3 0.3VDD Unit V V mA mA mA V V ns ns ns ns ns ns MHz tSETUP(D) Setup Time for DATA tSETUP(L) Setup Time for LATCH Table 7: Electrical Characteristics (VDD=3V, T = 25°C, unless otherwise specified.) Symbol VIH VIL IOH VOL VOH IOL1 IOL2 ∆IOL1 ∆IOL2 RSIN(up) Output Current Error between bit (All Output ON) Pull-up Resistor REXT = OPEN REXT = 470 Ω REXT = 250 Ω Supply Current (ON) REXT = 470 Ω REXT = 250 Ω OUT 0 to 7 = OFF OUT 0 to 7 = OFF OUT 0 to 7 = OFF OUT 0 to 7 = ON OUT 0 to 7 = ON Parameter Input Voltage High Level Input Voltage Low Level Output Leakage Current VOH = 16 V VDD-0.4V 20.0 49.7 20.1 50.2 20.3 50.7 ±3 ±3 150 100 300 200 0.3 5.5 10.1 5.5 10.1 600 400 0.6 7.7 14.1 7.7 14.1 Output Voltage (Serial-OUT) IOL = 1mA Output Voltage (Serial-OUT) IOH = -1mA Output Current VO = 0.7V REXT = 910 Ω VO = 0.7V REXT = 360 Ω VO = 0.7V REXT = 910 Ω VO = 0.7V REXT = 360 Ω Test Conditions Min. 0.7VDD GND Typ. Max. VDD 0.3VDD 10 0.4 Unit V V µA V V mA mA % % KΩ KΩ mA RSIN(down) Pull-down Resistor IDD(OFF1) Supply Current (OFF) IDD(OFF2) IDD(OFF3) IDD(ON1) IDD(ON2) 3/16 STP08CL596 Table 8: Switching Characteristics (VDD=3V, T = 25°C, unless otherwise specified.) Symbol tPLH1 tPLH2 tPLH3 tPLH tPHL1 tPHL2 tPHL3 tPHL tr tf Parameter Propagation Delay Time, CLK-OUTn, /LE = H, /OE = L Propagation Delay Time, /LE-OUTn, /OE = L Propagation Delay Time, /OE-OUTn, /LE = H Propagation Delay Time, CLK-SDO Propagation Delay Time, CLK-OUTn, /LE = H, /OE = L Propagation Delay Time, /LE-OUTn, /OE = L Propagation Delay Time, /OE-OUTn, /LE = H Propagation Delay Time, CLK-SDO Output Rise Time Output Fall Time Test Conditions VDD = 3 V VIL = GND IO = 40mA REXT = 470 Ω VIH = VDD CL = 13pF VL = 3 V RL = 65 Ω 200 25 25 25 50 25 200 17 250 50 50 50 70 50 250 25 ns ns ns ns ns ns ns ns Min. Typ. 250 220 Max. 280 250 Unit ns ns EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS Figure 2: /OE Terminal 4/16 STP08CL596 Figure 3: /LE Terminal Figure 4: CLK, SDI Terminal Figure 5: SDO Terminal 5/16 STP08CL596 Figure 6: Block Diagram Figure 7: Timing Diagram 6/16 STP08CL596 Figure 8: Clock, Serial-In, Serial-Out Figure 9: Clock, Serial-in, Latch, Enable, Outputs 7/16 STP08CL596 Figure 10: Outputs TEST CIRCUIT Figure 11: DC Characteristic Figure 12: AC Characteristic 8/16 STP08CL596 Figure 13: Output Current-R EXT Resistor Figure 14: Power Dissipation vs Temperature Package 9/16 STP08CL596 Plastic DIP-16 (0.25) MECHANICAL DATA mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch P001C 10/16 STP08CL596 SO-16 MECHANICAL DATA DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8° (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45° (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.25 1.64 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.010 0.063 0.018 0.010 0016020D 11/16 STP08CL596 TSSOP16 MECHANICAL DATA mm. DIM. MIN. A A1 A2 b c D E E1 e K L 0˚ 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8˚ 0.75 0˚ 0.018 0.024 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8˚ 0.030 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0079 0.201 0.260 0.176 inch A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 0080338D 12/16 STP08CL596 Tape & Reel SO-16 MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 6.45 10.3 2.1 3.9 7.9 12.8 20.2 60 22.4 6.65 10.5 2.3 4.1 8.1 0.254 0.406 0.082 0.153 0.311 TYP MAX. 330 13.2 0.504 0.795 2.362 0.882 0.262 0.414 0.090 0.161 0.319 MIN. TYP. MAX. 12.992 0.519 inch 13/16 STP08CL596 Tape & Reel TSSOP16 MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 6.7 5.3 1.6 3.9 7.9 12.8 20.2 60 22.4 6.9 5.5 1.8 4.1 8.1 0.264 0.209 0.063 0.153 0.311 TYP MAX. 330 13.2 0.504 0.795 2.362 0.882 0.272 0.217 0.071 0.161 0.319 MIN. TYP. MAX. 12.992 0.519 inch 14/16 STP08CL596 Table 9: Revision History Date 03-Aug-2004 23-Feb-2005 Revision 7 8 Description of Changes Package TSSOP (Exposed Pad) removed. Table 8 - pag. 4 data changed. Figure 14 - pag. 10 changed. Mistake on Table 7 - IDDOFF and IDDON OUT 0 to 15 ==> OUT 0 to 7. 15/16 STP08CL596 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16
STP08CL596B1 价格&库存

很抱歉,暂时无法提供与“STP08CL596B1”相匹配的价格&库存,您可以联系我们找货

免费人工找货